System info arch linux

ArchPKGs

Full Tutorial on vdr-systeminfo Installation on Arch Linux/Manjaro/Artix

«displays system informations like CPU type and speed, disk and swap space etc.» is the developer’s definition of vdr-systeminfo . To get vdr-systeminfo from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, BlackArch, Anarchy, Artix, Garuda) is rather straightforward. This guide will cover how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper like yay .

Table of Contents

Install link

Two typical fashions are used to install vdr-systeminfo from AUR. pacman is the way to go if you are an expert of Arch Linux and know the concept of how packages are built. Otherwise, yay is a common alternative to install packages without the prerequisite to review PKGBUILD and build packages with makepkg afterwards.

Using pacman link

sudo pacman -S --needed git && git clone https://aur.archlinux.org/vdr-systeminfo.git && cd vdr-systeminfo && makepkg -sicontent_copy

1. Install git if it is not already installed.
2. clone the package’s git repository from AUR.
3. cd into the folder.
4. Build the package with makepkg . Also, it will automatically be installed with pacman if built successfully.

Using yay link

yay -S vdr-systeminfocontent_copy

Update link

Updating AUR packages is basically the same as installing them. All you have to do is pull it from source then re-build it. However, it is still recommended to upgrade your whole system first with sudo pacman -Syu before updating any packages to avoid dependency issues, since Arch is a rolling-release Linux distro.

Using pacman link

git pull && makepkg -sicontent_copy

1. pull from the package’s git repository.
2. Use makepkg to build the package. Also, it will automatically be updated with pacman afterwards.

Using yay link

Uninstall link

Uninstalling packages is the most uncomplicated of these three,all you have to do is choose whether to keep the unused dependencies and the configuration files used by the package.

Using pacman link

sudo pacman -R vdr-systeminfocontent_copy

sudo pacman -Rs vdr-systeminfocontent_copy

sudo pacman -Rns vdr-systeminfocontent_copy

Using yay link

yay -R vdr-systeminfocontent_copy

yay -Rs vdr-systeminfocontent_copy

yay -Rns vdr-systeminfocontent_copy

For more details about how to install AUR packages on Arch-based Linux distributions, please refer to this post.

More Guides

How to Install qftp with CLI on Arch Linux/Manjaro/Parabola

«A user interface for FTP file transfer» is their definition of qftp. To install or uninstall this package (qftp) from AUR (Arch User Repository) on Arch Linux and Arch-based distributions (e.g. Manjaro, EndeavourOS, Parabola, ArcoLinux, Garuda) is relatively straightforward. This tutorial will show you step-by-step how to install/update/remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

r-stemhypoxia Install, Update and Uninstall Tutorial on Arch Linux/Manjaro/EndeavourOS

Referring to r-stemhypoxia’s own outline, it is «Differentiation of Human Embryonic Stem Cells under Hypoxia gene expression dataset by Prado-Lopez et al. (2010)». To install and update this package (r-stemhypoxia) from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, Artix) is comparatively simple. This tutorial will show you step-by-step how to install, update and remove the package with either the default package manager pacman or an AUR helper (e.g. yay).

A Complete Tutorial on python-pytomlpp Installation on Arch-Based Linux (Manjaro, Anarchy)

«A python wrapper for toml++.» is the developer’s profile of python-pytomlpp. To install and update python-pytomlpp from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, Parabola, Anarchy, Garuda and RebornOS is pretty easy. This tutorial will taught you how to install, update and remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

python2-python-tdbus Install/Update/Uninstall Tutorial on Arch Linux/Manjaro/ArcoLinux

Based on python2-python-tdbus’s outline, it’s «Simple Python bindings for D-BUS». To install or remove python2-python-tdbus from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, BlackArch and Garuda is pretty simple. This tutorial will show you step-by-step how to install, update and uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay).

usql Install (Update/Uninstall) Guide on Arch Linux, Manjaro and BlackArch

«A universal command-line interface for SQL databases» is the developer’s gist of usql. To install this package (usql) from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, ArcoLinux, Parabola) is comparatively straightforward. This tutorial will cover how to install/update/remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

How to Install linux6.2.2.zen1-1-zen-headers-bin (Complete Instructions) on Arch Linux/Manjaro/Garuda

Based on linux6.2.2.zen1-1-zen-headers-bin’s own description, it is «Headers and scripts for building modules for the Linux ZEN kernel 6.2.2-zen1-1-zen». To get linux6.2.2.zen1-1-zen-headers-bin from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, Anarchy) is relatively simple. This tutorial will taught you how to install, update and uninstall the package with either the default package manager pacman or an AUR helper like yay.

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник

Arch Linux

My Google-fu is failing me, what’s the name of the command to print system info?

Last edited by AncientPC (2012-02-24 23:51:24)

#2 2012-02-24 22:52:49

Re: [SOLVED] Simple question: command that prints system info?

Are you asking what print’s the info like in your terminal?

Side note I think you’re only suppose to post thumbnails,

"Any image with dimensions greater than 250x250px or over 50Kb in size will be removed."

in the terminal you are showing its a script called Archey from the AUR. Depending on the info you want one of these may be of use

Last edited by vwyodajl (2012-02-24 23:09:40)

#3 2012-02-24 23:06:51

Re: [SOLVED] Simple question: command that prints system info?

That one is called archey, yes. You can find it in the AUR: https://aur.archlinux.org/packages.php?ID=32556

Last edited by DSpider (2012-02-24 23:10:11)

I have made a personal commitment not to reply in topics that start with a lowercase letter. Proper grammar and punctuation is a sign of respect, and if you do not show any, you will NOT receive any help (at least not from me).

#4 2012-02-24 23:09:33

Re: [SOLVED] Simple question: command that prints system info?

If you read the screenshot posting rules you would have seen that there are a number of programs in AUR that provide that functionality. You also would have refrained from posting that huge and uneccessary image.

Registered Linux User #482438

#5 2022-06-11 02:52:30

Re: [SOLVED] Simple question: command that prints system info?

Are you asking what print’s the info like in your terminal?

Side note I think you’re only suppose to post thumbnails,

"Any image with dimensions greater than 250x250px or over 50Kb in size will be removed."

in the terminal you are showing its a script called Archey from the AUR. Depending on the info you want one of these may be of use

lspci is what i was looking for

|-\
| Member of the Great Resistance Coalition Against Big Tech Companies Lacking Privacy -|
|-/

Источник

DESCRIPTION

sysinfo() returns certain statistics on memory and swap usage, as well as the load average.

Until Linux 2.3.16, sysinfo() returned information in the following structure:

struct sysinfo < 
long uptime; /* Seconds since boot */ 
unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ 
unsigned long totalram; /* Total usable main memory size */ 
unsigned long freeram; /* Available memory size */ 
unsigned long sharedram; /* Amount of shared memory */ 
unsigned long bufferram; /* Memory used by buffers */ 
unsigned long totalswap; /* Total swap space size */ 
unsigned long freeswap; /* Swap space still available */ 
unsigned short procs; /* Number of current processes */ 
char _f[22]; /* Pads structure to 64 bytes */ >;

In the above structure, the sizes of the memory and swap fields are given in bytes.

Since Linux 2.3.23 (i386) and Linux 2.3.48 (all architectures) the structure is:

struct sysinfo < 
long uptime; /* Seconds since boot */ 
unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ 
unsigned long totalram; /* Total usable main memory size */ 
unsigned long freeram; /* Available memory size */ 
unsigned long sharedram; /* Amount of shared memory */ 
unsigned long bufferram; /* Memory used by buffers */ 
unsigned long totalswap; /* Total swap space size */ 
unsigned long freeswap; /* Swap space still available */ 
unsigned short procs; /* Number of current processes */ 
unsigned long totalhigh; /* Total high memory size */ 
unsigned long freehigh; /* Available high memory size */ 
unsigned int mem_unit; /* Memory unit size in bytes */ 
char _f[20-2*sizeof(long)-sizeof(int)]; 
/* Padding to 64 bytes */ >;

In the above structure, sizes of the memory and swap fields are given as multiples of mem_unit bytes.

RETURN VALUE

On success, sysinfo() returns zero. On error, -1 is returned, and errno is set to indicate the error.

Источник

DESCRIPTION

Print certain system information. With no OPTION, same as -s.

-a, —all print all information, in the following order, except omit -p and -i if unknown: -s, —kernel-name print the kernel name -n, —nodename print the network node hostname -r, —kernel-release print the kernel release -v, —kernel-version print the kernel version -m, —machine print the machine hardware name -p, —processor print the processor type (non-portable) -i, —hardware-platform print the hardware platform (non-portable) -o, —operating-system print the operating system —help display this help and exit —version output version information and exit

AUTHOR

Written by David MacKenzie.

REPORTING BUGS

COPYRIGHT

Copyright © 2023 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later https://gnu.org/licenses/gpl.html.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

SEE ALSO

Full documentation https://www.gnu.org/software/coreutils/uname
or available locally via: info ‘(coreutils) uname invocation’

Powered by archmanweb, using mandoc for the conversion of manual pages.

The website is available under the terms of the GPL-3.0 license, except for the contents of the manual pages, which have their own license specified in the corresponding Arch Linux package.

Источник