Transmitter tv audio to bluetooth headphones

How to Connect TV to Bluetooth Headphone& Speakers

The benefit of connecting TV audio to Bluetooth Headphones is, you can watch your favorite show without annoying family members. For hardcore gamers, good performance headphones or Bluetooth speakers are a nice addition to their big screen TV for an amazing surround sound experience. For those who already invested in an expensive Bluetooth headset or TV Bluetooth speakers, for their smartphone or PC gaming, then RF based headset bases will not be helpful to connect to these devices. Keep in mind, Bluetooth headphones are prone to lip-sync delay, make sure to select the low delay device.

This is the guide to connect TV to Bluetooth Audio Headphone & TV Speakers and listed best TV to Bluetooth Receiver/Transmitter.

How to Connect Bluetooth Transmitter to TV?

Well, there are at least four different types or audio ports on your TV back panel. As you see the audio ports below, you can see Analogue and digital audio ports for the TV to connect the TV audio to different devices.
Depends on your TV’s audio port, there are several Bluetooth Receiver and Transmitter devices are available in the market with different audio ports.If you

If you don’t want to know further and just want to buy the Bluetooth adapter for TV, please go this list for the Best Bluetooth TV Transceivers.

TV Analogue Audio Ports

The analog cables and audio devices are cheap but easy to get. The sound quality from these ports are not much impressive, but fair enough for watching TV shows and programs with your headphones. These analog audio ports are coming with 3.5 stereo pins or L/R RCA audio cables.

TV Digital Audio Ports

For those who want to get the high audio quality like Dolby Surround Sound or Seven Channel, sound system, better to select the digital audio ports from the TV back panel.
To make sure the maximum sound quality, the digital audio outputs are coming with coaxial or optical audio ports. These ports are good for gamers and movie players those do not want to compromise on sound quality.

Best Bluetooth Receiver/Transmitter for TV

Based on the above details that need to take care while you select your next Bluetooth Transmitter for TV.

HomeSpot Dual Stream

Connector: 3.5/RCA Audio/ Optical Toslink | Bluetooth Profile: A2DP | Battery backup: 7 Hours | Device Mode: Transmitter | Range: 30 feet | Buy from Amazon

Avantree aptX Low Latency Bluetooth Transmitter

Connector: 3.5/6.35 Headphone/RCA Audio | Bluetooth Profile: A2DP | Battery backup: 6.5 Hours | Device Mode: Transmitter | Range: 32 feet | Buy from Amazon

TV Bluetooth Adapter-Things to Consider

There are several parameters to take into consideration while selecting the Bluetooth Adapter for TV. The Audio latency is an important specification you have to take care. The Bluetooth adapter profile, battery backup, Bluetooth range those are the other factors you have to consider with Bluetooth Adapter. Based on your TV ports, you have to select the right adapter with matching audio port to connect your TV.

Audio Latency

The first thing you have to consider is the latency. Latency is the term used to measure the delay between the picture and the sound on the Bluetooth-connected headphones, measured in milliseconds, the lower, the better. Since the Bluetooth circuitry will take some time to process the sound and transit to the Bluetooth headset, they can never achieve zero milliseconds latency with the current technology. The latency varies from 30ms to 500ms depends on the quality of the TV Bluetooth Transmitter. For a Bluetooth Transmitter with 30ms to 100ms latency is not recognizable and will not make much difference while you watch movies or TV shows with headphones.

Bluetooth Transmitter/Receiver Power Supply

Some of the Bluetooth transceivers are coming with a built-in battery, not mandatory while you are using the Bluetooth adapter at home. However, please make sure your Bluetooth headphones have a power connector port (usually mini or micro USB port) to connect to the power supply. As long as your TV has power, these devices should depend on this power source to function.

TV Bluetooth Device Operating Modes

The solution to connect TV to Bluetooth headphone or Bluetooth Speaker is to use a Bluetooth transceiver for the TV. Bluetooth TransCeivers can work as both Bluetooth Transmitters for Bluetooth Speakers and Headphones. There are two different modes that most of the Bluetooth transceiver operate.

Bluetooth Receiver Mode (RX Mode)

One is Bluetooth receivers that can receive the sound signal from other Bluetooth devices such as Bluetooth headsets (this have a mic) or smartphone devices.

The number of devices supports in this mode is one and most suitable to connect with Car Audio.

Bluetooth Transmitter Mode (TX Mode)

For those who want to play the TV sound through an external speaker or headphones, then the best choice is TV Bluetooth Transmitter, that can transmit the TV audio to Bluetooth Devices.

Most of the Bluetooth adapters listed here, support two Bluetooth headsets or speaker or the mix of both in these modes.

Connect TV to Bluetooth Headphone&Speakers

The device selection is based on your requirements. To connect TV to Bluetooth headphones, you can just buy a Bluetooth Transmitter Device and the port should determine based on the available port on your TV. Most of the TV headphones are RF headphones that communicate with the TV base unit and Headphone using radio frequency. For those who want to buy the RF headphones, please see 7 Best RF & Bluetooth Wireless Headphones for TV.

Instead, if you are looking for a Bluetooth adapter to use with your TV and Car Audio, better to buy a Bluetooth Transmitter/Receiver type adapter. Please make sure you select the low audio latency device to get the right performance while you watch the movie and play video games.

Disclosure: Mashtips is supported by its audience. As an Amazon Associate I earn from qualifying purchases.

Related Articles

10 Best Value for Money Laptops Under $400

Level Up Your Gaming: Top Internal SSDs to Boost Performance on Amazon 2023

Complete Your Samsung S23 Experience with These Must-Have Accessories

7 COMMENTS

Hello – thanks for the good advice. I have a Sony Bravia TV KDL-50W800B with a digital audio out
(which I have connected to my Vizio soundbar) and a headphone jack. I’d like to
use wireless headphones with the TV. Sony says to use their RF headphones, but
I would prefer to go Bluetooth (for sound quality, no interference). So I’ll get a Bluetooth transmitter, which is compatible with my Bluetooth headphones (to be determined). A2DP or Aptx technology. I’d like to use Bose QC 35s (I value the high end active noise cancellation) but users say there’s bound to be lip sync (lag) problems. Vizio says it can’t help (using the soundbar in the mix). It
has a bluetooth in, but no outs I’d also use the headphones with my MacBook Pro (Bluetooth
enabled) for music Is there any way to solve the lip sync problem using the TV’s
headphone jack or digital out? If the lip sync lag is perceptible, I’ll go with RF or use wired headphones.

@Michael,
For Bluetooth TV headphones, the main concern is Bluetooth circuitry delay that introduces a latency between the sound source (TV) and destination (Headphone). This latency depends on the headphone unit circuitry design and quality of the components. Since there is no control over this sound latency (lip sync issue), chose the best available Bluetooth headsets with low latency.
Unfortunately, TV Bluetooth manufacturers are not giving any measured latency to choose the right one. Even though HAVIT and TaoTronics are claiming low latency for the Bluetooth adapter, there is no specific number to compare both units latency. Your ideal solution will be RF headphones if you are not happy with these low latency Bluetooth Adapters.

Excellent Blog!! Thanks for sharing information about How to Connect TV to Bluetooth Audio Headphone & Speakers, It’s beneficial for people.

Good day to you All at Mashtips! Will I get problems with a Chromecast dongle by also fitting a Bluetooth dongle next to it?
Brgds John H

How to Connect TV to Bluetooth Headphone& Speakers
I bought a Logitech Bluetooth Audio Adapter for Bluetooth Streaming
Can I use this with my Vizio tv Model D48-D0? I am using the one that I already bought for my tablet to use my older surround sound speakers for audio coming from my tablet. Now I want to turn my tv (that I bought about 5 years ago, but does not have bluetooth) into bluetooth so I can use my surround sound for my tv too. I will be using the same speakers that I use to listen to my tablet.

Please can somebody tell me what to get, to use Bluetooth headphones at a higher volume, for myself, who has hearing loss, while keeping the TV speakers at a more normal volume, for my wife.

Источник