Ubuntu | No WiFi Adapter found
Just connect using usb cable to do usb tethering, open terminal by Ctrl+Alt+T and type:
sudo apt-get install --reinstall bcmwl-kernel-source This didn’t work for me in my ubuntu 17.10. I also tried to disable the secure boot in my bios but didn’t have luck. As of now only ethernet cable works for me but when I try to use wifi connection I can’t
I joined just to upvote, as this solved my issue, but I´d appreciate if you could give a bit more of insight on why that solved the issue
So, the issue for me was because of secure-boot, uefi and the restriction on third party libraries which would be usually required for the network devices to work.
Following Rajat’s comment proved useful for me on Ubuntu 18.04
sudo apt-get install --reinstall bcmwl-kernel-source Reboot your OS and then follow instructions about Enrolling MUC. Once that is done, third party libraries should be able to interact with your devices and everything should work.
A problem with Broadcom BCM43142 (14e4:4365). the problem has been known for a long time. You need to download and install the package bcmwl-kernel-source
To GAD3R — First, the version is not specified Kali Linux. Second, for Kali — forums.kali.org/… and forums.kali.org/… as minimum
This is not a Ubuntu issue.
This is not any driver issue.
This is caused by me (and possibly you).
While watching some video. I tried to increase volume with:
Fn + F10 key combination . But I mistakenly pressed
Fn + F12 which was Wifi button with ‘Radio’ symbol on it, which disabled my wifi connection.
Running below command in Terminal, you can see the issue:
> rfkill list all 0: Toshiba Bluetooth: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes
Solution: Press again the Fn + F12 (or, some other key where you have Radio symbol)
Now run again the same command:
> rfkill list all 0: Toshiba Bluetooth: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no
(Windows button, if you have on the keyboard) > Settings > Wifi > move to On > select your Wiki connection to enter credentials
Done, your internet is back on.
First, you’ll need to find the exact model of the Broadcom network adapter chip your notebook has. «802.11n» is just the name of the Wi-Fi standard it supports: Broadcom has several wireless chips supporting that standard.
lspci -nn would be a good command to list all PCI(e) devices on your laptop and their PCI ID numbers: those numbers would allow a more accurate identification. lsusb will do the same for USB devices.
The lspci -nn listing line might look something like this:
12:00.0 Network controller [0280]: Broadcom Limited BCM43228 802.11a/b/g/n [14e4:4359] Here, the numbers [14e4:4359] are the Device ID. The first part specifies the vendor (Broadcom = 14e4) and the second part identifies the device model.
The lsusb listing is a bit different, but the Device ID number is similar: 4 hexadecimal digits for the vendor id, a colon, and then 4 hexadecimal digits for the product ID.
You can check here for the Linux support status of various Broadcom chip models: https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
Note that the supported Broadcom chips will need firmware: it is probably available pre-packaged in Ubuntu. If Ubuntu uses the same naming scheme as Debian, the firmware package name should be firmware-brcm80211 .
With a bit of luck, installing this firmware package and rebooting might be enough to get your Wi-Fi functional if the necessary driver is already in kernel.
Installed Ubuntu 18.04 on an old Dell computer and got the same message (no wifi adapter found) when trying to connect to the internet. Tried some of the solutions proposed here and in other postings, none of which worked. Decided to re-install. During the installation there is a radial button «Install third party software for graphics and wi-fi hardware and additional media formats». The default is that this is not checked and so this option is not included in the default install. On the re-install, I checked this button, and after all the dust settled had no trouble connecting to the internet.
This worked for me — circa 2008 macbook installing Ubuntu 18.04 !! Select «Install third party software for graphics and wi-fi hardware and additional media formats» during install. Nice — thanks!
This may be covered in other answers, still: Post UBUNTU installation and ethernet connected; 2 steps:
- run (sudo apt-get install firmware-b43-installer) — reboot
- run (sudo apt-get install —reinstall bcmwl-kernel-source) — reboot
Context: The drivers are proprietary components of BroadComm. Ubuntu (a non proprietary) will not be able to install the packages due to authentication failure even though they are downloaded. Hence the separate steps are to be followed to get wifi enabled. This does not get you bluetooth though. It may need another set of steps.
If ethernet is not connected, download package from other machines, copy to UBUNTU machine and run.
Thanks to perror, Rajat, GAD3R and Alex.
If the bcmwl-kernel-source solution did not work for you and you want to keep secure boot enabled, then try the following:
Create a set of keys for signing:
openssl req -new -x509 -newkey rsa:2048 -keyout MOK.priv -outform DER -out MOK.der -nodes -days 36500 -subj "/CN=Descriptive common name/" Import the key. You’ll be prompted for a password here, which you’ll need to remember. Your BIOS should prompt you for the password after the reboot.
sudo mokutil --import MOK.der You should have been prompted by your BIOS for the password. Assuming that worked, then you’ll want to test that your MOK was successfully enrolled.
Now that your MOK has been enrolled. You will need to install the drivers for you wifi.
git clone https://github.com/lwfinger/rtlwifi_new.git cd rtlwifi_new git checkout extended sudo make install Your drivers are available for adding to your kernel, but you need to sign them first before adding them because you have secure boot enabled. So use the keys you generated earlier to sign your drivers.
sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n rtlwifi) sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n rtl_pci) sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n btcoexist) sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n rtl8723-common) sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n phydm_mod) sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n rtl8723de) Finally, add the rtl8723de drivers to the kernel in this order
sudo modprobe -r rtlwifi sudo modprobe rtlwifi sudo modprobe -r rtl_pci sudo modprobe rtl_pci sudo modprobe -r btcoexist sudo modprobe btcoexist sudo modprobe -r rtl8723-common sudo modprobe rtl8723-common sudo modprobe -r phydm_mod sudo modprobe phydm_mod sudo modprobe -r rtl8723de sudo modprobe rtl8723de On a side note: for the final step you might be able to get away with just writing:
sudo modprobe -r rtl8723de sudo modprobe rtl8723de modprobe knows which drivers rtl8723de depends on and should therefore be able to add everything that rtl8723de depends on along with rtl8723de . However, I didn’t add my drivers this way and thus, can’t guarantee this option will work.
You could try the Realtek RTL8723DE module for Linux kernel version >= 4.15.
git clone https://github.com/smlinux/rtl8723de.git -b 4.15-up dkms add ./rtl8723de dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 depmod -a reboot this approach works on current kernels
uname -m && uname -r && cat /etc/*release # kernel 5.4 or newer including 5.8 x86_64 5.4.0-57-generic first confirm you are using broadcom
output should appear similar to
02:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4352 802.11ac Wireless Network Adapter (rev 03)
03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
sudo apt-get purge bcmwl-kernel-source # buggy package circa year 2020 sudo apt-get install broadcom-sta-source broadcom-sta-dkms broadcom-sta-common then reboot and you should be OK
below is a crash file while still using ubuntu package bcmwl-kernel-source
cat /var/crash/bcmwl-kernel-source.0.crash ProblemType: Package DKMSBuildLog: DKMS make.log for bcmwl-6.30.223.271+bdcom for kernel 5.8.0-32-generic (x86_64) Thu 03 Dec 2020 08:50:14 PM EST make: Entering directory '/usr/src/linux-headers-5.8.0-32-generic' CFG80211 API is prefered for this kernel version Using CFG80211 API AR /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/built-in.a CC [M] /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.o CC [M] /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.o CC [M] /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_iw.o CC [M] /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.o /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c: In function ‘osl_reg_map’: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:949:10: error: implicit declaration of function ‘ioremap_nocache’; did you mean ‘ioremap_cache’? [-Werror=implicit-function-declaration] 949 | return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); | ^~~~~~~~~~~~~~~ | ioremap_cache /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:949:10: warning: returning ‘int’ from a function with return type ‘void *’ makes pointer from integer without a cast [-Wint-conversion] 949 | return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c: In function ‘wl_attach’: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:593:20: error: implicit declaration of function ‘ioremap_nocache’; did you mean ‘ioremap_cache’? [-Werror=implicit-function-declaration] 593 | if ((wl->regsva = ioremap_nocache(dev->base_addr, PCI_BAR0_WINSZ)) == NULL) < | ^~~~~~~~~~~~~~~ | ioremap_cache /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:593:18: warning: assignment to ‘void *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion] 593 | if ((wl->regsva = ioremap_nocache(dev->base_addr, PCI_BAR0_WINSZ)) == NULL) < | ^ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c: In function ‘wl_pci_probe’: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:780:2: warning: this ‘if’ clause does not guard. [-Wmisleading-indentation] 780 | if ((val & 0x0000ff00) != 0) | ^~ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:782:3: note: . this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 782 | bar1_size = pci_resource_len(pdev, 2); | ^~~~~~~~~ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:783:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 783 | bar1_addr = (uchar *)ioremap_nocache(pci_resource_start(pdev, 2), | ^ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c: In function ‘wl_reg_proc_entry’: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:3376:58: error: passing argument 4 of ‘proc_create_data’ from incompatible pointer type [-Werror=incompatible-pointer-types] 3376 | if ((wl->proc_entry = proc_create_data(tmp, 0644, NULL, &wl_fops, wl)) == NULL) < | ^~~~~~~~ | | | const struct file_operations * In file included from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:38: ./include/linux/proc_fs.h:102:31: note: expected ‘const struct proc_ops *’ but argument is of type ‘const struct file_operations *’ 102 | extern struct proc_dir_entry *proc_create_data(const char *, umode_t, | ^~~~~~~~~~~~~~~~ In file included from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:40: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_set_auth_type’: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.h:52:5: warning: this statement may fall through [-Wimplicit-fallthrough=] 52 | if (wl_dbg_level & WL_DBG_DBG) < \ | ^ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:816:3: note: in expansion of macro ‘WL_DBG’ 816 | WL_DBG(("network eap\n")); | ^~~~~~ /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:817:2: note: here 817 | default: | ^~~~~~~ cc1: some warnings being treated as errors make[1]: *** [scripts/Makefile.build:288: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.o] Error 1 make[1]: *** Waiting for unfinished jobs. cc1: some warnings being treated as errors make[1]: *** [scripts/Makefile.build:288: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.o] Error 1 make: *** [Makefile:1780: /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build] Error 2 make: Leaving directory '/usr/src/linux-headers-5.8.0-32-generic' DKMSKernelVersion: 5.8.0-32-generic Date: Thu Dec 3 20:50:17 2020 DuplicateSignature: dkms:bcmwl-kernel-source:6.30.223.271+bdcom-0ubuntu5:/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:949:10: error: implicit declaration of function ‘ioremap_nocache’; did you mean ‘ioremap_cache’? [-Werror=implicit-function-declaration] Package: bcmwl-kernel-source 6.30.223.271+bdcom-0ubuntu5 PackageVersion: 6.30.223.271+bdcom-0ubuntu5 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.30.223.271+bdcom-0ubuntu5: bcmwl kernel module failed to build Ubuntu 20.04 - No wifi adapter found DELL
I know there are many questions about this, but no one works for me. I have been more than a week testing blogs, github and forum solutions, actually I really don't know what I have installed, blacklisted and created to try to get back my wifi adapter. Problem started after I connect my ipad to my laptop. Manufacturer: Dell Inc. Product Name: Inspiron 3521 Kernel release:
lspci -knn | grep Net -A3; rfkill list 02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Kernel modules: bcma, wl 0: hci0: Bluetooth Soft blocked: no Hard blocked: no modprobe: FATAL: Module wl not found in directory /lib/modules/5.4.0-37-generic /etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf /etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the /etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system. When removing iwlwifi, first /etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi. /etc/modprobe.d/iwlwifi.conf:remove iwlwifi \ /etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \ /etc/modprobe.d/RTL810xE.conf:options RTL810xE fwlps=N secure boot disable load legacy option Enable Boot list option legacy Secure Boot not enabled on this system. Done. if I throw sudo apt install --reinstall bcmwl-kernel-source :
wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.4.0-37-generic/updates/dkms/ depmod. DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for man-db (2.9.1-1) . Processing triggers for initramfs-tools (0.136ubuntu6) . update-initramfs: Generating /boot/initrd.img-5.4.0-37-generic