- Linux USB Ethernet/RNDIS Gadget Drivers
- Drivers Installer for Linux USB Ethernet/RNDIS Gadget
- Linux USB Ethernet/RNDIS Gadget: Drivers List
- Linux USB Ethernet/RNDIS Gadget: Supported Models of Laptops
- Thread: Linux Driver for «USB 2.0 to Ethernet» Adaptor?
- Linux Driver for «USB 2.0 to Ethernet» Adaptor?
- Re: Linux Driver for «USB 2.0 to Ethernet» Adaptor?
- Ubuntu 17.04. install driver for USB Ethernet Adapter [closed]
- Установка драйвера USB Lan qf9700
Linux USB Ethernet/RNDIS Gadget Drivers
Drivers Installer for Linux USB Ethernet/RNDIS Gadget
If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download Outbyte SCI Drivers Installer, follow this button. Install drivers automatically
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Linux USB Ethernet/RNDIS Gadget: Drivers List
7 drivers are found for ‘Linux USB Ethernet/RNDIS Gadget’. To download the needed driver, select it from the list below and click at ‘Download’ button. Please, ensure that the driver version totally corresponds to your OS requirements in order to provide for its operational accuracy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Special offer. See more information about Outbyte and uninstall instructions. Please review Outbyte EULA and Privacy policy.
Linux USB Ethernet/RNDIS Gadget: Supported Models of Laptops
We have compiled a list of popular laptops models applicable for the installation of ‘Linux USB Ethernet/RNDIS Gadget’. By clicking at the targeted laptop model, you’ll be able to look through a comprehensive list of compatible devices.
| # | Manufacturer | Model | Devices |
| 1 | Lenovo | ThinkCentre M91p (4518A22) | 39 Devices List |
| 2 | HP | FZ127AA-ABF s3623f | 38 Devices List |
| 3 | Lenovo | 10A6000VUS | 24 Devices List |
| 4 | Fujitsu | D1322 | 32 Devices List |
| 5 | HP | HP Compaq nc6320 (RH791UC#ABE) | 39 Devices List |
| 6 | HP | P6531c | 33 Devices List |
| 7 | HP | CK8 | 29 Devices List |
 | Asus Adds TurboMaster GPU Feature to G751 ROG Laptops |
 | Biostar Suggests Replacing Space-Unfriendly Desktops with iDEQ-T1 PC |
 | Samsung Exynos 7 Octa: SoC with Enhanced Graphics Performance |
 | Sony Updates eXtra Bass Series of Headphones |
The Sciologness.com™ agent utility uses data collection technology to conveniently update multiple PC drivers. Drivers are the property and the responsibility of their respective manufacturers, and may also be available for free directly from manufacturers’ websites. Sciologness.com is not responsible in any way for the performance of or issues caused by any third-party drivers.Drivers may also be available for free directly from manufacturers’ websites. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Any other third-party products, brands or trademarks listed above are the sole property of their respective owner. No affiliation or endorsement is intended or implied.
Thread: Linux Driver for «USB 2.0 to Ethernet» Adaptor?
Spilled the Beans 
Join Date May 2010 Location Lower Hutt, New Zealand Beans 15 —> Beans 15 Distro Ubuntu 10.04 Lucid Lynx
Linux Driver for «USB 2.0 to Ethernet» Adaptor?
I have bought a ST Lab «USB 2.0 to Ethernet» adaptor (P/N: USB 2.0-LAN100-1). The disk that came with it appears to have a driver only for Windows. I need a driver for Linux (specifically Ubuntu 11.10).
I looked on the ST Lab web site but was unable to find a Linux driver for this product. I also tried several times to contact ST Lab support via the website but have received no reply.
It would be appreciated if anyone could tell me if there is a Linux driver for this product?
Iced Almond Soy Ubuntu, No Foam 
Join Date Dec 2011 Location The Netherlands Beans 1,087 —> Beans 1,087 Distro Ubuntu 11.10 Oneiric Ocelot
Re: Linux Driver for «USB 2.0 to Ethernet» Adaptor?
Originally Posted by novicee 
I have bought a ST Lab «USB 2.0 to Ethernet» adaptor (P/N: USB 2.0-LAN100-1). The disk that came with it appears to have a driver only for Windows. I need a driver for Linux (specifically Ubuntu 11.10).
I looked on the ST Lab web site but was unable to find a Linux driver for this product. I also tried several times to contact ST Lab support via the website but have received no reply.
It would be appreciated if anyone could tell me if there is a Linux driver for this product?
You may wanna use the «unbold» button on the editor.
sudo lsusb sudo lspci sudo lshw -C network sudo ifconfig -a sudo cat /etc/network/interfaces
Some can take a long time,
the 3rd one may appear to be stuck at «PCI (SYSFS)», but it just takes a long time to scan so just let it run until your prompt reappears.
Ubuntu 17.04. install driver for USB Ethernet Adapter [closed]
This describes a problem that can’t be reproduced that seemingly went away on its own or was only relevant to a very specific period of time. It’s off-topic as it’s unlikely to help future readers.
Need to install a USB Ethernet Adapter (lsusb string below) Bus 003 Device 005: ID 0bda:8152 Realtek Semiconductor Corp. I have got four files by the manufacturer: /home/sergey/Downloads/RTL8152/LINUX Andriod/50-usb-realtek-net.rules /home/sergey/Downloads/RTL8152/LINUX Andriod/compatibility.h /home/sergey/Downloads/RTL8152/LINUX Andriod/Makefile /home/sergey/Downloads/RTL8152/LINUX Andriod/r8152.c Q1: Do I need to install these files above somehow? Q2: If Q1 is negative, How to check the Adapter / make it work? Note: The main goal is to connect a Wi-Fi hub (Zyxell KEENETIC) via the above Adapter. Indication on the hub shows no network connection via the Adapter. Please advise. SK EDIT for @chili555 TY for your prompt answer. Pls see the findings below.
sergey@home-X200CA:~$ lsmod | grep r8152 r8152 49152 0 mii 16384 2 usbnet,r8152 sergey@home-X200CA:~$ ifconfig enp3s0: flags=4163 mtu 1500 inet6 fe80::da50:e6ff:fe9e:f905 prefixlen 64 scopeid 0x20 ether d8:50:e6:9e:f9:05 txqueuelen 1000 (Ethernet) RX packets 618782 bytes 742610979 (742.6 MB) RX errors 0 dropped 1787 overruns 0 frame 0 TX packets 441907 bytes 64009887 (64.0 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 enx00e04c362984: flags=4099 mtu 1500 ether 00:e0:4c:36:29:84 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 6098 bytes 2693946 (2.6 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6098 bytes 2693946 (2.6 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ppp0: flags=4305 mtu 1492 inet 5.35.51.212 netmask 255.255.255.255 destination 5.35.0.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 458293 bytes 537885941 (537.8 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 337967 bytes 41480878 (41.4 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 sergey@home-X200CA:~$ dmesg | grep r8152 [ 16.811429] usbcore: registered new interface driver r8152 [ 17.019410] r8152 3-1.3:1.0 eth0: v1.08.8 [ 19.889560] r8152 3-1.3:1.0 enx00e04c362984: renamed from eth0 sergey@home-X200CA:~$ dmesg | grep inp350 sergey@home-X200CA:~$ sergey@home-X200CA:~$ dmesg | grep inp3s0 sergey@home-X200CA:~$ Установка драйвера USB Lan qf9700
Вы не можете комментировать, т.к. не авторизованы.
Комментарий удален
‘); return HTML.join(»); > if ( (Screened && !Screenable && !ScreenedAndVisible) || !Readable ) < HTML.push('
На вашем блоге по поводу решения проблемы с драйвером на usb lan qf 9700 я узнал много полезной информации, и даже попробовал, и у меня почти получилось установить этот драйвер! Но ядро у меня чуть-чуть другое в этом-то и проблемка.
Сам я в линуксе не мастер по собиранию драйверов, да и даже не имею малейшего представления как их собирать, но если вы выложили свое мыло на блоге, то я подумал что вы готовы помочь или хотябы направить мои мысли в нужное русло для решения проблемы с установкой данного драйвера на моем ядре.
А суть проблеммы вот-то в чем: у меня ос Linux mint 9 росинка ядро соответственно 2.6.32-27-generic. Соответственно драйвера как с диска, так и пропатченые которые я скачал у вас с блога и успешно пропатчил, не могу собрать ( после команды make ругается на ядро, я так понял. (при входе в каталог /usr/src/linux-heaers-2.6.32-27-generic пишет «Нет правила для сборки цели, потом «Выход из каталога» и «Ошибка»)
Собственно говоря проблемка не из простых, но если вы смогли решить подобное, то вы сможете хотя бы намекнуть мне как мне действовать.
P. S. извините что я слишком навязчив, но только вы можете мне помочь, за раннее ОГРОМНОЕ СПАСИБО. если обратили внимание на мою просьбу