Usermod commands in linux

A Complete Guide to Usage of ‘usermod’ command – 15 Practical Examples with Screenshots

In Unix/Linux distributions, the command ‘usermod‘ is used to modify or change any attributes of a already created user account via command line. The command ‘usermod‘ is similar to that ‘useradd‘ or ‘adduser‘ but the login granted to an existing user.

The command ‘useradd‘ or ‘adduser‘ is used for creating user accounts in Linux systems. To know more about on how to create system users, read our complete guide at:

After creating user accounts, in some scenarios where we need to change the attributes of an existing user such as, change user’s home directory, login name, login shell, password expiry date, etc, where in such case ‘usermod’ command is used.

When we execute ‘usermod‘ command in terminal, the following files are used and affected.

1. /etc/passwd – User account information.
2. /etc/shadow – Secure account information.
3. /etc/group – Group account information.
4. /etc/gshadow – Secure group account information.
5. /etc/login.defs – Shadow password suite configuration..

Basic syntax of command is:

Requirements

1. We must have existing user accounts to execute usermod command.
2. Only superuser (root) is allowed to execute usermod command.
3. The usermod command can be executed on any Linux distribution.
4. Must have basic knowledge of usermod command with options

Options of Usermod

The ‘usermod‘ command is simple to use with lots of options to make changes to an existing user. Let us see how to use usermod command by modifying some existing users in Linux box with the help of following options.

1. -c = We can add comment field for the useraccount.
2. -d = To modify the directory for any existing user account.
3. -e = Using this option we can make the account expiry in specific period.
4. -g = Change the primary group for a User.
5. -G = To add a supplementary groups.
6. -a = To add anyone of the group to a secondary group.
7. -l = To change the login name from tecmint to tecmint_admin.
8. -L = To lock the user account. This will lock the password so we can’t use the account.
9. -m = moving the contents of the home directory from existing home dir to new dir.
10. -p = To Use un-encrypted password for the new password. (NOT Secured).
11. -s = Create a Specified shell for new accounts.
12. -u = Used to Assigned UID for the user account between 0 to 999.
13. -U = To unlock the user accounts. This will remove the password lock and allow us to use the user account.

In this article we will see ‘15 usermod commands‘ with their practical examples and usage in Linux, which will help you to learn and enhance your command-line skills using these options.

1. Adding Information to User Account

The ‘-c‘ option is used to set a brief comment (information) about the user account. For example, let’s add information on ‘tecmint‘ user, using the following command.

# usermod -c "This is Tecmint" tecmint

After adding information on user, the same comment can be viewed in /etc/passwd file.

# grep -E --color 'tecmint' /etc/passwd tecmint:x:500:500:This is Tecmint:/home/tecmint:/bin/sh

2. Change User Home Directory

In the above step we can see that our home directory is under /home/tecmint/, If we need to change it to some other directory we can change it using -d option with usermod command.

For example, I want to change our home directory to /var/www/, but before changing, let’s check the current home directory of a user, using the following command.

# grep -E --color '/home/tecmint' /etc/passwd tecmint:x:500:500:This is Tecmint:/home/tecmint:/bin/sh

Now, change home directory from /home/tecmint to /var/www/ and confirm the home director after changing.

# usermod -d /var/www/ tecmint # grep -E --color '/var/www/' /etc/passwd tecmint:x:500:500:This is Tecmint:/var/www:/bin/sh

3. Set User Account Expiry Date

The option ‘-e‘ is used to set expiry date on a user account with the date format YYYY-MM-DD. Before, setting up an expiry date on a user, let’s first check the current account expiry status using the ‘chage‘ (change user password expiry information) command.

# chage -l tecmint Last password change : Nov 02, 2014 Password expires : never Password inactive : never Account expires : Dec 01, 2014 Minimum number of days between password change : 0 Maximum number of days between password change : 99999 Number of days of warning before password expires : 7

The expiry status of a ‘tecmint‘ user is Dec 1 2014, let’s change it to Nov 1 2014 using ‘usermod -e‘ option and confirm the expiry date with ‘chage‘ command.

# usermod -e 2014-11-01 tecmint # chage -l tecmint Last password change : Nov 02, 2014 Password expires : never Password inactive : never Account expires : Nov 01, 2014 Minimum number of days between password change : 0 Maximum number of days between password change : 99999 Number of days of warning before password expires : 7

4. Change User Primary Group

To set or change a user primary group, we use option ‘-g‘ with usermod command. Before, changing user primary group, first make sure to check the current group for the user tecmint_test.

# id tecmint_test uid=501(tecmint_test) gid=502(tecmint_test) groups=502(tecmint_test)

Now, set the babin group as a primary group to user tecmint_test and confirm the changes.

# usermod -g babin tecmint_test # id tecmint_test uid=501(tecmint_test) gid=502(babin) groups=502(tecmint_test)

5. Adding Group to an Existing User

If you want to add a new group called ‘tecmint_test0‘ to ‘tecmint‘ user, you can use option ‘-G‘ with usermod command as shown below.

# usermod -G tecmint_test0 tecmint # id tecmint

Note: Be careful, while adding a new groups to an existing user with ‘-G’ option alone, will remove all existing groups that user belongs. So, always add the ‘-a‘ (append) with ‘-G‘ option to add or append new groups.

6. Adding Supplementary and Primary Group to User

If you need to add a user to any one of the supplementary group, you can use the options ‘-a‘ and ‘-G‘. For example, here we going to add a user account tecmint_test0 with the wheel user.

# usermod -a -G wheel tecmint_test0 # id tecmint_test0

So, user tecmint_test0 remains in its primary group and also in secondary group (wheel). This will make my normal user account to execute any root privileged commands in Linux box.

eg : sudo service httpd restart

7. Change User Login Name

To change any existing user login name, we can use ‘-l‘ (new login) option. In the example below, we changing login name tecmint to tecmint_admin. So the username tecmint has been renamed with the new name tecmint_admin.

# usermod -l tecmint_admin tecmint

Now check for the tecmint user, It will not be present because we have changed it to tecmint_admin.

Check for the tecmint_admin account it will be there with same UID and with existing group what we have added before.

8. Lock User Account

To Lock any system user account, we can use ‘-L‘ (lock) option, After the account is locked we can’t login by using the password and you will see a ! added before the encrypted password in /etc/shadow file, means password disabled.

Check for the locked account.

# grep -E --color 'babin' cat /etc/shadow

9. Unlock User Account

The ‘-U‘ option is used to unlock any locked user, this will remove the ! before the encrypted password.

# grep -E --color 'babin' /etc/shadow # usermod -U babin

Verify the user after unlock.

# grep -E --color 'babin' /etc/shadow

10. Move User Home Directory to New location

Let’s say you’ve a user account as ‘pinky‘ with home directory ‘/home/pinky‘, you want to move to new location say ‘/var/pinky‘. You can use the options ‘-d‘ and ‘-m‘ to move the existing user files from current home directory to a new home directory.

Check for the account and it’s current home directory.

# grep -E --color 'pinky' /etc/passwd

Then list the files which is owned by user pinky.

Now we have to move the home directory from /home/pinky to /var/pinky.

# usermod -d /var/pinky/ -m pinky

Next, verify the directory change.

# grep -E --color 'pinky' /etc/passwd

Check for the files under ‘/home/pinky‘. Here we have moved the files using -m option so there will be no files. The pinky user files will be now under /var/pinky.

# ls -l /home/pinky/ # ls -l /var/pinky/

11. Create Un-encrypted Password for User

To create an un-encrypted password, we use option ‘-p‘ (password). For demonstration purpose, I’m setting a new password say ‘redhat’ on a user pinky.

After setting password, now check the shadow file to see whether its in encrypted format or un-encrypted.

# grep -E --color 'pinky' /etc/shadow

Note: Did you see in the above image, the password is clearly visible to everyone. So, this option is not recommended to use, because the password will be visible to all users.

12. Change User Shell

The user login shell can be changed or defined during user creation with useradd command or changed with ‘usermod‘ command using option ‘-s‘ (shell). For example, the user ‘babin‘ has the /bin/bash shell by default, now I want to change it to /bin/sh.

# grep -E --color 'babin' /etc/passwd # usermod -s /bin/sh babin

After changing user shell, verify the user shell using the following command.

# grep -E --color 'babin' /etc/passwd

13. Change User ID (UID)

In the example below, you can see that my user account ‘babin‘ holds the UID of 502, now I want to change it to 888 as my UID. We can assign UID between 0 to 999.

# grep -E --color 'babin' /etc/passwd OR # id babin

Now, let’s change the UID for user babin using ‘-u‘ (uid) option and verify the changes.

# usermod -u 888 babin # id babin

14. Modifying User Account with Multiple Options

Here we have a user jack and now I want to modify his home directory, shell, expiry date, label, UID and group at once using one single command with all options as we discussed above.

The user Jack has the default home directory /home/jack, Now I want to change it to /var/www/html and assign his shell as bash, set expiry date as December 10th 2014, add new label as This is jack, change UID to 555 and he will be member of apple group.

Let we see how to modify the jack account using multiple option now.

# usermod -d /var/www/html/ -s /bin/bash -e 2014-12-10 -c "This is Jack" -u 555 -aG apple jack

Then check for the UID & home directory changes.

# grep -E --color 'jack' /etc/passwd

Check for the group which all jack have been member.

# grep -E --color 'jack' /etc/group

15. Change UID and GID of a User

We can change UID and GID of a current user. For changing to a New GID we need an existing group. Here already there is an account named as orange with GID of 777.

Now my jack user account want to be assigned with UID of 666 and GID of Orange (777).

Check for the current UID and GID before modifying.

Conclusion

Here we have seen how to use usermod command with its options in very detailed fashion, Before knowing about usermod command, one should must know ‘useradd’ command and its options to use the usermod. If I’ve missed any point in the article do let me know via comments and don’t forget to add your valuable comments.

Источник