Вай фай реалтек линукс

Here’s how to Enable Realtek RTL8188FTV Wi-Fi adapter on Linux (Ubuntu) (Beginner friendly guide)

The full name of the Wi-Fi adapter is Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter, however to make it easier, I use Realtek RTL8188FTV Wi-Fi adapter on the rest of this article.

TL;DR: How to setup Realtek RTL8188FTV WiFi adapter on Linux. Jump to the “Here’s how to use Realtek RTL8188FTV WiFi adapter on Linux” section.

• This article shares you the guide how to make Realtek RTL8188FTV Wi-Fi adapter to connect to Ubuntu.
• Although this article is made based on Ubuntu, however the same steps should work for other Linux distros.
• In case you have queries, post them on the comment section below.
• For other interesting articles, head to: Linux, Android, iOS, Games and Gaming, Tech, FREE Games and Stuffs and more on JILAXZONE.
• If you find this article / content inside is already obsolete, do let me know by commenting on the comment section below so that I can update the article to reflect the latest process/news. Thanks.

My work sometimes requires me to be involved with Linux, however, mostly is on shell scripting to run ETL related programs. Outside work, I’m actually pretty new on the Linux world especially on setting up the hardware/environment. To keep long story short: I recently got myself a used home-office server with Intel Xeon processors and had installed Ubuntu Desktop on it. I also recently bought a Wi-Fi dongle from AliExpress – the cheapest I could find – but turned out, it’s not straight-away compatible with Linux or in my case with my Ubuntu Desktop.

So after searching, trying and testing myself here and there, finally I was able to make the Wi-Fi adapter runs perfectly on my Ubuntu Desktop. Therefore, with this article I would like to share the steps – beginner steps, so that if you are like me – newbie to Linux – you won’t get frustrated setting up the Wi-Fi adapter on your Linux / Ubuntu PC.

The Realtek RTL8188FTV WiFi adapter

While I don’t recommend you to get this Wi-Fi Adapter (because it’s not straight-away running on Linux), but if you are not sure which one to get, I would say do give this Wi-Fi adapter a try, because at least you could get it running using the guide written here.

Realtek RTL8188FTV WiFi adapter

Get it from AliExpress

Note: If you buy anything from AliExpress using links above, I will earn a small commission at no extra cost charged on your purchases.

Here’s how to use Realtek RTL8188FTV WiFi adapter on Linux

Don’t worry, my guide written below will be a very step by step beginner friendly.

Before starting, ensure you have plugged in the Realtek RTL8188FTV WiFi adapter into one of your Linux PC USB ports and have booted up your Linux PC. The steps below are tested on Ubuntu Desktop 22.04.1 LTS.

Step 1) Open Terminal

a) On your Ubuntu PC, click on the Grid button (which has nine dots) to open the Application drawer.

b) Inside the Application drawer, find and click on “Terminal” to open it.

c) When you successfully open Terminal, you should see a window with black background and white text, similar to Windows Command Prompt.

Step 2) Ensure the WiFi adapter is there

Before continuing on the next step, ensure your Realtek RTL8188FTV WiFi adapter has been detected by the OS, by doing the following steps:

a) Inside Terminal, key in and then press Enter:

This will return you all the network interfaces your Linux is having. See if you can find something with prefix as “wlx” (such as “wlx002711003c26 on my case).

As an alternative way, inside Terminal, you can key in and press Enter:

This command will return you all the available device that plugs to your USB port. See if you can find “Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter” from the list.

If you can find the adapter from the list, then proceed to the next step.

Step 3) Updates your Linux packages to the latest

Once confirmed you can see your Realtek RTL8188FTV WiFi adapter detected by the OS, now first update your Linux (Ubuntu) to the latest. This is to ensure, your Ubuntu Desktop has all the latest packages. Follow the steps in sequence.

a) To resync latest package index and information – need to install latest packages.

sudo apt update

b) To upgrade all packages to the latest

sudo apt upgrade

c) To install network related tools command (such as ifconfig)

sudo apt install net-tools

Once you have done the steps above, by right your Linux packages has been updated to the latest.

Step 4) Add Kelebek repository

Kelebek is the contributor that wrote the driver for Realtek RTL8188FTV WiFi adapter. Follow the steps in sequence.

a) To add Kelebek repository

sudo add-apt-repository ppa:kelebek333/kablosuz

b) Then resync latest package index and information, this time to get Kelebek package(s) which contains driver for Realtek RTL8188FTV WiFi adapter.

sudo apt-get update

Step 5) Install the Realtek RTL8188FTV WiFi adapter.

Now it’s the time to install the driver for Realtek RTL8188FTV WiFi adapter.

sudo apt-get install rtl8188fu-dkms

b) (Optional) To purge the now-no-longer-needed packages

sudo apt purge rtl8188fu-dkms

Step 6) Change the Realtek RTL8188FTV WiFi adapter driver config

On Terminal, key in and press Enter:

echo “options rtl8188fu rtw_ips_mode=0” | sudo tee /etc/modprobe.d/rtl8188fu.conf

Then key in and press Enter:

sudo modprobe -rv rtl8188fu && sudo modprobe -v rtl8188fu

Step 7) Reboot your Linux PC

By right after doing the steps above, the Realtek RTL8188FTV WiFi adapter should have been detected and ready to be used, but in case it’s not or just to be safe, do restart your Linux PC.

Click the Power menu (on top right of the screen), then choose Restart.

Step 8) Connect to your Wi-Fi

Once rebooted, login to your Linux PC, then do the following steps:

a) Click on Grid button > Settings > Wi-Fi.

b) Turn ON the Wi-Fi if it’s not yet turned ON.

c) The select the network you want to connect to and key in the password.

Voila! That’s quite a long steps but you should now get the Realtek RTL8188FTV WiFi adapter activated and connected to your chosen Wi-Fi network.

Bring it all together

Like I mentioned earlier, if you have not purchased the Realtek RTL8188FTV WiFi adapter, I would highly recommend you not to buy this adapter and instead find adapter that’s has direct compatibility with Linux. I provided some of the links below. However, if either you have purchased or not sure which one to buy, then using the guide I shared above, you should get the adapter up and running.

D-Link USB WiFi Adapter Dual Band AC1300	Get D-Link from Amazon
TP-Link USB WiFi Adapter N150	Get TP-Link from Amazon

Wi-Fi adapter that’s directly supported by Linux distros: Wi-Fi Adapter list from Linux Contributors.

In case you have queries or are facing difficulties, don’t hesitate to put your issues or thoughts down below on the comment section. I’ll be happy to assist!

Interested to see other Windows tips and tricks? Check them out here: Linux tips and tricks at JILAXZONE.

Note: If you buy anything from Amazon using links above, I will earn a small commission at no extra cost charged on your purchases.

Do you have anything you want me to cover on my next article? Write them down on the comment section down below.

Alternatively, find more interesting topics on JILAXZONE:

JILAXZONE – Jon’s Interesting Life & Amazing eXperience ZONE.

Hi, thanks for reading my curated article. Since you are here and if you find this article is good and helping you in anyway, help me to spread the words by sharing this article to your family, friends, acquaintances so the benefits do not just stop at you, they will also get the same goodness and benefit from it.

Or if you wish, you can also buy me a coffee:

Live to Share. Share to Live. This blog is my life-long term project, for me to share my experiences and knowledge to the world which hopefully can be fruitful to those who read them and in the end hoping to become my life-long (passive) income.

My apologies. If you see ads appearing on this site and getting annoyed or disturb by them. As much as I want to share everything for free, unfortunately the domain and hosting used to host all these articles are not free. That’s the reason I need the ads running to offset the cost. While I won’t force you to see the ads, but it will be great and helpful if you are willing to turn off the ad-blocker while seeing this site.

Источник

Вай фай реалтек линукс

Установка драйвера для Wi-Fi адаптера от Realtek под Linux может стать небольшой проблемой. Есть несколько версий драйверов на github, но не все подходят для ядра линукс версий 5.+ . Здесь покажу рабочий вариант

У меня USB адаптер, и вот так он выглядит в lsusb. ID: 0bda:c811

Bus 001 Device 003: ID 0bda:c811 Realtek Semiconductor Corp. 802.11ac NIC 

Установка

Вот этот драйвер подойдет к адаптерам на базе RTL8811CU RTL8821CU RTL8731AU, и к Linux kernel версий 4.19-6.1: https://github.com/morrownr/8821cu-20210916

Устанавливаю на Ubuntu 22.10:

sudo apt update && sudo apt install build-essential git dkms bc git clone https://github.com/morrownr/8821cu-20210916.git cd 8821cu-20210916 sudo ./install-driver.sh 

Если все прошло успешно, скрипт спросит “Do you want to edit the driver options file now?” — отказываемся. На предложение перезагрузки соглашаемся 🙂

После ребута получаем рабочий Wi-Fi адаптер:

Источник