Включить bluetooth kali linux

How to Fix Bluetooth Problem in Kali Linux?

Many users are facing Bluetooth problems in Kali Linux. The problem is that the Bluetooth service won’t start even after enabling it. I’ve seen in many Linux forum complaints from the users saying “Bluetooth not working in Kali Linux”. This is not a big issue for many users. But this might irritate you in many situations when you need Bluetooth and you will be failed to turn it on from the setting. Here is how to fix the Bluetooth issue in Kali Linux. You can easily fix the Bluetooth problem in Kali Linux by following these simple steps. Also Read: – How to Fix ‘Snapd Returned Status Code 400: Bad Request’ in Ubuntu?

How to Fix Bluetooth Problem in Kali Linux?

1. Open terminal and type sudo lsmod | grep Bluetooth and hit Enter
2. This command will search for the Bluetooth in ismod
3. After it, just type systemct1 enable bluetooth.service
4. Now enable the Bluetooth by using the command systemct1 start bluetooth.service

How to Fix Bluetooth Not Working in Kali Linux?

1. If the above method doesn’t work for you then open the terminal again
2. Type service Bluetooth restart
3. Hit enter
4. This will restart the Bluetooth services and you will be able to turn on the Bluetooth. In most of cases, it works.

How to Fix Bluetooth Issue in Kali Linux?

1. Go to Power Setting
2. Check for the “Turn off Bluetooth to Save Power”
3. Make sure that it is turned ‘OFF’
4. If it is turned ON then must turn it OFF
5. Now check your Bluetooth works or not.

I hope the above method helps you to fix the Bluetooth problem in Kali Linux. One of the above methods will surely help you to fix the Bluetooth issue in Kali Linux. Do share this post and keep visiting us for more tricks tips and fix.

Источник

Troubleshoot, fix and enable Bluetooth on Kali Linux

In this short tutorial, we’ll show how to enable Bluetooth on Kali Linux. We’ll go through the commons steps for setting up the Bluetooth and cover different situations and possible issues:

• check if you have all core system packages in place
• assure that your Bluetooth device is not blocked
• install Blueman package
• check service status and start it if it’s not already started
• potential issues and solutions:
  • an issue with libgcc-9-dev package— to solve this issue check out this tutorial

  2. Check if you have all core system packages in place

  If you installed the basic/core version of Kali Linux, it’s good practice to do do the update and upgrade after the installation, so that you have a complete package list. For that purpose use the following commands:

  sudo apt-get update sudo apt-get upgrade

  If these commands results say that everything is up to date and you’re sure that you didn’t do any updates on your new system, check the contents of the /etc/apt/sources.list fille. For this purpose, you can use any text editor, for example, nano:

  sudo nano /etc/apt/sources.list

  In my case, I downloaded and installed a rolling release and I didn’t have any repositories configured. The contents of my sources.list file was as follows:

  # deb cdrom:[Debian GNU/Linux 2019.4 _Kali-rolling_ - Official Snapshot am> #deb cdrom:[Debian GNU/Linux 2019.4 _Kali-rolling_ - Official Snapshot amd> # This system was installed using small removable media # (e.g. netinst, live or single CD). The matching "deb cdrom" # entries were disabled at the end of the installation process. # For information about how to configure apt package sources, # see the sources.list(5) manual. 

  deb http://http.kali.org/kali kali-rolling main non-free contrib

  After I did this, I executed update&upgrade again, waited for a half an hour and in the end I actually had all things in place.

  3. Be sure that your Bluetooth device is not blocked

  Sometimes, it happens that the Bluetooth device itself is blocked/disabled. This could happen due to software or hardware reasons. To check the device status, use the rfkill list command:

  0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Assure that the Bluetooth device you’re trying to use for the connection is not blocked. In case that it’s blocked, use the following command to unblock it:

  sudo rfkill unblock bluetooth

  For a more detailed tutorial on rfkill tool, check out this tutorial.

  3. Assure that Bluetooth service is started

  If your Bluetooth device was blocked/disabled, it’s a chance that the Bluetooth service is not started on your machine, so start it using:

  sudo service bluetooth start

  4. Install blueman package

  Blueman is a Bluetooth manager with great UI that uses blueZ in the background. It will help you to easily manage your Bluetooth devices. If you don’t have it already, install it using

  sudo apt-get install blueman

  In this step, I had the issue with package versions saying:

  After all of this goes fine, you’ll see the Bluetooth icon next to the clock and you’ll be able to connect and use your Bluetooth devices.

  5. Conclusion

  In this tutorial, we showed how to enable Bluetooth on Kali Linux and troubleshoot the issues.

  Check also.

  Источник

  How To Install Bluetooth Adapter in Kali Linux [2023]

  

  With the increasing popularity of Bluetooth devices like mice, keyboards, and headsets, it can be difficult to imagine using the wired versions of these devices. Some Linux distributions as well as kali Linux come with preinstalled Bluetooth for you right out of the box. But sometimes it doesn’t work. However, I will guide you on how to install Kali Linux Bluetooth.

  Many Linux users complain that the Bluetooth adapter does not work after a fresh Kali Linux installation. Bluetooth connectivity issues in Linux have been around for a long time. Many users get trouble sharing their documents with others. Others struggle to link their PCs to their handhelds or headphones in order to listen to their favorite playlists or binge-watch videos.

  This problem still exists in the Ubuntu LTS and Kali Linux versions that were just released. There are a lot of user complaints about this on the Linux forums. So, in this post, we’ll show you how to solve this problem once and for all.

  Probable Kali Linux Bluetooth problems

  • Bluetooth Adapter not working
  • Bluetooth toggle not showing in the top panel
  • Can’t turn on the Bluetooth service
  • Kali Linux Bluetooth Manager is not found in the application menu
  • The system seems to recognize devices, but cannot actually find any devices.

  How does Bluetooth work in Kali Linux?

  BlueZ is the official Linux Bluetooth stack. It provides, in its modular way, support for the core Bluetooth layers and protocols.

  Currently, BlueZ consists of many separate modules:

  • Bluetooth kernel subsystem core
  • L2CAP and SCO audio kernel layers
  • RFCOMM, BNEP, CMTP, and HIDP kernel implementations
  • HCI UART, USB, PCMCIA, and virtual device drivers
  • General Bluetooth and SDP libraries and daemons
  • Configuration and testing utilities
  • Protocol decoding and analysis tools

  How to Set Up Bluetooth in Kali Linux?

  This short tutorial will show how to install Bluetooth in Kali Linux. We’ll go through the commons steps for setting up Bluetooth and cover different situations:

  Источник

  How to Fix Kali Linux Bluetooth issues

  

  

  Does your Kali machine have issues or problems to do with Bluetooth?

  You are probably going to Settings and turning Bluetooth On, but annoyingly, the toggle button returns to Off, as if you did not just do anything. For others the toggle button accepts to change to On, but nothing displays inside the Bluetooth window, again, as if you did not just do anything, and additionally for these cases, if you exit the Bluetooth window or close Settings and then return to Bluetooth settings, the toggle is back to Off. Damn annoying!

  This article highlights some of the ways to fix the problems;

  Fix 1: Enable/Activate Bluetooth Manually in Terminal

  This is the most basic fix that works for most.

  [Step 1: Check if you have Bluetooth installed in your Kali machine via ‘apt’]

  

  If this command returned results with certain information/flags, for instance “Package:”, “Version:”, “Priority:”, “Section:”, “Source:”, “Maintainer:”, “Installed-Size:”, “Depends:”, “Suggests:”, “Homepage:”, “Tag:”, “Download-Size:”, “APT-Sources:” && “Description:”!, then you are good to go. Continue with Fix 1. If you got that Bluetooth is not installed in your Kali machine, you need to check other fixed that are provided after Fix 1.

  [Step 2: Check the Status of Bluetooth as a Service]

  

  systemctl status bluetooth

  Here, you are looking for an ‘active’ status in the results of the above command. The results should contain “Loaded:“, “Active:” and “Docs:” flags.
  Our focus here is with the “Active:” flag, which should return an ‘active (running)‘ status, if Bluetooth is running. If it is not, as expected in this case, the results will have an ‘inactive (dead)‘ status. We thus have to manually change this status.

  [Step 3: Activating Bluetooth]

  systemctl start bluetooth

  Just like you usually start any service in Kali/Debian, you use the keyword ‘service’ followed by the action you want to take, for instance, ‘start’ and ‘stop’, and finally the service you are targeting when performing the specified action.
  You should not expect any output in Terminal if this command goes through successfully. It silently performs the intended task and then returns to the location you were working with in Terminal before running the command. It almost looks like you did nothing, but be fooled not, as this is the core of this fix!

  [Step 4: Check the Status of Bluetooth now]

  

  systemctl status bluetooth

  If the command from the previous step went through successfully, you expect to get an ‘active (running)‘ status now in the “Active:” flag.
  The results of this command will have flags similar to the time we ran it first in Step 2, with additional flags. The flags now will be; “Loaded:”, “Active:”, “Docs:”, “Main PID:”, “Status:”, “Tasks:”, “Memory:”, “CPU:” and “CGroup:”.

  You are now good to go! Just to confirm the Fix worked, open Settings and navigate to Bluetooth settings. Turn the toggle button to On for Bluetooth and your Kali machine should now start searching for the nearby Bluetooth devices. Also, for the record, closing Bluetooth settings now should not actually close Bluetooth or change the toggle button to off when you return to Settings.

  

  Fix 2: Install Bluetooth

  If the results of Step 1 in Fix 1 showed that Bluetooth is not installed, you could not continue with the subsequent steps. This fix is for you. It is a simple as you only need to install Bluetooth. Use the following commands;

  sudo apt-get install bluetooth

  Alternatively, you can download Bluetooth manually from the provided repository in Debian packages, depending on the version of Debian, that is “Jessie“, “Stretch” or “Buster“.

  Note that Buster is the newest Release for Debian followed by Stretch as we backdate.

  The package you will get from the download is a *.deb file which you can install from directly using the ‘dpkg‘ command and package manager, like;

  Another alternative for Linux is using the latest modules provided by BlueZ, at http://www.bluez.org/download/. BlueZ provides support for Linux Bluetooth core protocols and layers for generally all Linux distros, but more specifically for; Debian GNU/Linux, Ubuntu Linux, Fedora Core / Red Hat Linux, OpenSuSE / SuSE Linux, Mandrake Linux, Gentoo Linux and Chrome OS.

  NOTE:// After successfuly installing Bluetooth in your machine, you might want to activate it before using it. This is because, after installing Bluetooth, yo might now encounter the issue we solved in Fix 1 above. Therefore, you might want to follow the steps in Fix 1 above after the installation.

  Fix 3: Last option

  If for whatever reason the above two fixes did not work for you you can try Uninstalling Bluetooth and then Re-Installing it. After successfully getting Bluetooth in your machine, you might want to also go back to Fix 1 to activate Bluetooth, due to reasons presented in the Fix 2 Note!

  SUPPORT [[:thetqweb:]] VIA

  Источник

  Читайте также:  Блютуз модуль kebidu схема подключения