Vmware esxi виртуальный роутер

Cisco IOS XRv 9000 Router Installation and Configuration Guide

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

• Preface
• Preparing for Installation
• Installing the Cisco IOS XRv 9000 Router in VMware ESXi Environments
• Installing the Cisco IOS XRv 9000 Router in KVM Environments
• Customize Installation using Golden ISO
• Cisco IOS XRv 9000 Router Smart Licensing
• Accessing the Console Port
• Cisco IOS XRv 9000 Router Specific Features
• Cisco IOS XRv 9000 Appliance
• Cisco IOS XRv 9000 Router Deployment on Amazon Web Services (AWS)
• Appendix

Book Title

Cisco IOS XRv 9000 Router Installation and Configuration Guide

Installing the Cisco IOS XRv 9000 Router in VMware ESXi Environments

Results

Chapter: Installing the Cisco IOS XRv 9000 Router in VMware ESXi Environments

Installing the Cisco IOS XRv 9000 Router in VMware ESXi Environments

• .iso—Used for installing the image on the VM. This can also be used to create a VM in any supported hypervisor environment.
• .ova—Used for deploying the OVA template on the VM (in TAR format). The OVA image is recommended for deploying Cisco IOS XRv 9000 Router on the VMware ESXi hypervisor.

Installation Requirements for VMware ESXi

Before installing Cisco IOS XRv 9000 Router, you must first set up your VMware environment, including the necessary host and client software. For example, if you are installing Cisco IOS XRv 9000 Router in a VMware ESXi environment, you must first install the vSphere Client.

For information on the installation requirements for VMware ESXi, refer to the latest Release Notes for Cisco IOS XRv 9000 Router.

See the Table 1 for release notes links.

When deploying Cisco IOS XRv 9000 Router with OVA file, six vNICs are automatically created. You can manually add these vNICs to the VM after Cisco IOS XRv 9000 Router has booted.

See these sections for information on VMware ESXi support, and supported VMware features and operations:

Installing the Cisco IOS XRv 9000 Router to the VM

VMWare ESXi supports installing Cisco IOS XRv 9000 Router to the VM using the OVA and ISO file.

The Citrix XenServer, KVM and Microsoft Hyper-V implementations do not support deploying the VM using the .ova file. You must install the VM using the .iso file.

Installation using OVA file

The OVA file package includes an OVF file that contains a default VM configuration based on Cisco IOS XR release. Use the default.ova package to deploy Cisco IOS XRv 9000 Router as virtual Provider Edge, a high speed virtual router and use the vrr.ova package to deploy Cisco IOS XRv 9000 Router as virtual Route Reflector, a high scale route reflector.

For information on how to install Cisco IOS XRv 9000 Router using OVA file, see the section Installing the Cisco IOS XRv 9000 Router to the VM using OVA Template.

Installation using ISO file

For information on how to install Cisco IOS XRv 9000 Router using ISO file, see the section Deploying the Cisco IOS XRv 9000 Router to the VM using ISO Template .

Installing the Cisco IOS XRv 9000 Router to the VM using OVA Template

The following procedure provides a general guideline for how to deploy the Cisco IOS XRv 9000 Router. However, the exact steps that you need to perform may vary depending on the characteristics of your VMware environment and setup.

If VM’s configurations such as memory, CPU, and NICs are modified, then the Cisco IOS XRv 9000 Router must be rebooted for the changes to take effect.

Before you begin

• The vSphere Client is installed on your machine.
• You have set the correct Firewall Options to allow VM Serial port to be connect over network.

Procedure

In the vSphere client, select File > Deploy OVF Template.

Select the location where the Cisco IOS XRv 9000 Router .ova file is stored and click Next.

Verify OVF template details, and click Next.

Specify the name of the VM, select Inventory Location, and click Next.

(Cisco IOS XR Release 5.4 and later) Select a hardware deployment configuration from the drop-down, and click Next.

Select the datastore for the VM files, and click Next.

Select the format in which virtual disks are stored, and click Next.

The Thick Provision Eager Zeroed option takes longer duration to install but provides better performance. Thick Provisioned will also consume more physical space on the disk.

Under Network Mapping, allocate one or more virtual network interface card (vNIC) on the destination network using the drop-down list.

In the Virtual Machine Properties window configure the properties for the VM if available. This will vary depending on release.

Select Power on after deployment to automatically power on the VM.

Click Finish to deploy the OVA.

The OVA deploys the .iso file and, if the Power on after deployment setting is selected, automatically powers on the VM. When the VM is powered on, Cisco IOS XRv 9000 Router begins the installation and boot process. If a bootstrap configuration file was included in the OVA, the router configuration is automatically enabled. For information on bootstrap configuration file, see the CVAC — Bootstrap Configuration Support

What to do next

Access the console on the Cisco IOS XRv 9000 Router. For details see the Console Mapping section.

Installing the Cisco IOS XRv 9000 Router to the VM using ISO Template

The following procedure provides a general guideline for how to deploy Cisco IOS XRv 9000 Router using VMware vSphere. However, the exact steps that you need to perform may vary depending on the characteristics of your VMware environment and setup. The steps in this procedure are based on VMware ESXi 5.5 version.

Before you begin

• The vSphere Client is installed on your machine.
• You have set the correct Firewall Options to allow VM serial port to be connect over network.

Procedure

Download the Cisco IOS XRv 9000 Router ISO file and copy the file to the VM Datastore.

Use the _vga version of ISO file to map the XR console to VGA console, else the XR console will be mapped to the first serial port. See Mapping the Router Network Interfaces to VM Network Interface Cards.

In the vSphere client, select Create a New Virtual Machine.

Under Configuration, select Create a Custom configuration, and click Next.

Specify the name of the VM, and click Next.

Under Storage, select the datastore for the VM files, and click Next.

Select Virtual Machine version 8, and click Next.

Select Linux and the Other 2.6 Linux (64-bit) setting from the drop-down, and click Next.

Under CPUs, select the following settings:

• Number of virtual sockets (virtual CPUs)
• Number of cores per socket The number of cores per socket must always be set to 1, regardless of the number of virtual sockets selected. For example, a Cisco IOS XRv 9000 Router with the 4 vCPU configuration must be configured as 4 sockets and 1 core for each socket.

For information on the supported number of virtual CPUs and the corresponding required RAM allocation for your release, see the Installation Requirements for VMware ESXi section .

Click Next.

Configure the VM’s memory size. Click Next.

Supported memory size is 16GB.

Under Network, allocate at least 4 virtual network interface cards (vNICs).

1. From the drop-down select the number of vNICs.
   

   Note	The VMware ESXi 5.5 interface allows for creating 4 vNICS during the initial VM creation. You can add more vNICs after the VM is created and Cisco IOS XRv 9000 Router is first booted.

2. Add the vNICs.
   • Select a different network for each vNIC. Note the 2nd and 3rd NICs are reserved.
   • Select the adapter type from the drop-down menu. Select E1000 adapter for the first three NICs and later you may select physical interfaces (passthrough) or VMXNET3. For information on the supported adapter type in your release, see the Installation Requirements for VMware ESXi section.
     

     Note	From Release 6.0, VMXNET3 NIC is supported.

3. Select all vNICs to connect at power-on, and click Next.
   

   Note	You can add vNICs into the VM using vSphere while Cisco IOS XRv 9000 is running. For more information about adding vNICS to an existing VM, see the vSphere documentation.

Under SCSI Controller, select LSI Logic Parallel, and click Next.

Under Select a Disk, click Create a new virtual disk.

Under Create a Disk, select the following:

• Capacity: Disk Size See the Installation Requirements for VMware ESXi section for information on the virtual hard disk size required in your release.
• Disk Provisioning Select one of the following:
  • Thick Provision Lazy Zeroed
  • Thick Provision Eager Zeroed
  • Thin Provisioned

  The Thick Provision Eager Zeroed option takes a longer duration to install but provides better performance. Thick Provisioned also consumes more physical space on the disk.

  Click Next.

  Under Advanced Options, select IDE (0:0) for the virtual device node.

  On the Ready to Complete screen, select Edit the virtual machine settings before completion.

  Click Continue checkbox.

  Click New CD/DVD Drive and do the following:

  1. Select the Device Type from which the VM boots: Select Datastore ISO file option to boot from the Cisco IOS XRv 9000 .iso file. Browse to the location of the .iso file on the datastore set in Step 1.
  2. In the Device Status field, select Connect at power on checkbox.
  3. Select the Virtual Device Node CD/DVD drive on the host from which the VM boots.

  To add a serial port (Console Port), click Add under the Hardware tab.

  Setting up the serial ports is required for a non-vga (default) image.

  For information on configuring serial console access, see the Configuring Serial Console Access in VMware ESXi

  Select Serial Port and click Next.

  Select Connect via Network and click Next.

  Select Server and add a telnet address of the host and an unused port higher than 1000. Click Next.

  On Ready to Complete screen, click Finish.

  Repeat Step 17 till Step 22 to add three serial ports. The three ports are XR auxiliary port, admin port, and admin auxiliary port.

  In the Resources tab, click the CPU setting and set the Resource Allocation setting to Unlimited.

  Click Finish.

  The VM is now configured for Cisco IOS XRv 9000 Router and is ready to boot. Cisco IOS XRv 9000 is booted when the VM is powered on.

  What to do next

  To access and configure Cisco IOS XRv 9000 Router from the serial port on the ESXi host instead of the VM console, provision the VM to use this setting before powering on the VM and booting the router. For more information, see the Console Mapping section.

  By default the XR console is mapped to the first serial port of the VM. However, if a VGA image is used for Cisco IOS XRv 9000 Router deployment, the XR console is mapped to the VGA console. The VGA console is accessed at the Console Tab in the vSphere Client.

  Increasing Performance on VMware ESXi Configurations

  You can improve performance on VMware ESXi configurations by performing the following:

  • Disable VMware ESXi power management. Choose the High Performance setting to disable power management in VMware ESXi. For more information, see the VMware Documentation.

  The downside of improving performance on VMware ESXi is that it requires dedicated system resources.

  Источник