Vmware kali linux настройка сети

VMware Kali Linux пропал интернет в ВМ

На основной машине стоит Ubuntu 18.04 LTS, на гостевой — Kali Linux. Гостевые дополнения, или же VMware Tools установлены. Беспроводной Интернет реальной машины распознавался в виртуальной как подключение по Ethernet. До определённого момента всё работало замечательно, с Интернетом на реальной машине всё в порядке, но на ВМ пропал, будто его и не было 🙁 Пробовала менять в настройках подключение NAT на Bridge, не помогло. Даже пингнуть ничего не могу. Вывод команды ifconfig:

lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 16 bytes 960 (960.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 960 (960.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

eth0: flags=4098 mtu 1500 ether 2a:14:1c:b7:85:14 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Содержание файла /etc/network/interfaces:

 This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback

Ethernet интерфейса и в помине нет. Каюсь заранее, уровень моих знаний мягко говоря, начальный, прошу камнями не кидаться. Подскажите, кто-нибудь, как поднять сеть? И на всякий случай заранее скажу: виртуальной машиной пользуюсь, т.к. мне просто так удобнее. Про LiveUSB слышала, пользоваться пока не собираюсь.

Источник

How to Enable WiFi in Kali Linux on VMware

Hey, are you looking to Enable Wi-Fi in VMware in Kali Linux? If yes then this is the right place to find out the easiest way to Enable WiFi in VMware.

Sometimes people face the same problem while installing Kali Linux on VMware, they are not able to use their Wifi on the system.

So read this article completely on know How you can Enable WiFi on Kali Linux in VMware Workstation.

How to Enable WiFi in Kali Linux on VMware

Kali Linux is a popular Linux distribution for penetration testing and security auditing. It is often run within a virtual machine using software such as VMware.

However, by default, the WiFi may not be enabled in a Kali Linux virtual machine running on VMware. This guide will show you how to enable WiFi in VMware Kali Linux.

Step 1: Install VMware Tools

The first step is to install VMware Tools, which is a suite of utilities that enhances the performance of a virtual machine’s guest operating system and improves the management of the virtual machine.

To install VMware Tools, go to the “Virtual Machine” menu, select “Install VMware Tools” and follow the prompts to complete the installation.

Step 2: Configure Network Settings

Once VMware Tools are installed, go to the “Edit” menu, select “Virtual Network Editor” and configure the network settings.

By default, VMware creates a network adapter that is set to “NAT” (Network Address Translation) mode, this mode allows the virtual machine to access the internet, but it does not allow the virtual machine to be accessible from the host or from other machines on the same network.

To enable WiFi, you need to change the adapter to “Bridged” mode, this allows the virtual machine to use the host’s wireless adapter and access the wireless network.

Step 3: Enable Wireless Interface

After the network adapter is configured, open a terminal and type:

This will show a list of available network interfaces, look for the wireless interface, it should be labeled as “wlan0” or “wlp3s0” (the label may vary depending on your setup).

To enable the wireless interface, type the following command:

Step 4: Connect to a wireless network

Now that the wireless interface is enabled, you can use the command line tool “iwconfig” to scan for available wireless networks and connect to one of them. To scan for available networks, type the following command:

This will show a list of available wireless networks, take note of the “ESSID” (network name) of the network you want to connect to. To connect to a wireless network, type the following command:

iwconfig wlan0 essid “ESSID”

replace “ESSID” with the name of the network you want to connect to.

Step 5: Configure DHCP

Once you are connected to a wireless network, you need to configure DHCP to get an IP address, type the following command:

This will request an IP address from the DHCP server on the wireless network, once the IP address is obtained you should be able to access the internet from the virtual machine.

Conclusion

By following these steps, you should now be able to enable WiFi in VMware Kali Linux. This can greatly improve the user experience and make it easier to use the virtual machine for penetration testing and security auditing tasks, as well as for general internet access. Remember to always use a secure wireless network when connecting to the internet from a virtual machine.

If you have liked this article and liked it, then you can share it with friends and family so that they do not ever get such a problem.

If you have any problem with any part of this article, or you want any more information related to the computer, then tell me in the comment box, and I will surely reply to you.

Please Share This Share this content

• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window
• Opens in a new window

Источник

Troubleshooting Kali VMware Virtual Machine No Internet Connection

This Tip shows you How to Solve Kali VMware Virtual Machine No Internet Connection.

And this Solution has been Tested on a several VMware Fusion/Workstation Linux Virtual Machines.

1. Setting up Network Interface

2. Launching Terminal

Contents

Showing Ads here is the best solution I found for not embarassing somebody about participating in a #%$Foundation^.

«When the Last Tree has been cut down, the Last Fish caught, the Last River poisoned, only then will we realize that One Cannot Eat Money.»

«No usable Computer exists today with completely Open Software and Hardware (as much as some companies want to Market themselves as such).»

Follow Us

The GNU/Linux Free Software Phylosophy

Steve Jobs’ Last Words

«Being a Winner in a Free Computing OS Mission means to adopt a Commercial like Strategy. Transcending Duality in Oneness and so dispensing both Free and Non Free Software. Cause evangelizing Freedom in a Non Free World is like keeping a Trojan Horse. Hallelujah!»

«Using the Money just for buying Stuff and Not Supporting the Free Gift Philosophy is a sign of a Selfish and Narrow Mind.»

What can Save the World from a Blind and Quick Self-destruction.
The Immediate and Humble Mass Conversion to the Spiritual Way!
Because Earth & Nature has been Ravaged without Pity by the Wild and Selfish mass Competition to Win and Shown that U’re someone Better because you got a Lot of fla$hY Power$$$.

«Taking care if somebody is liking, following, or buying is just a serious hidrance on the priceless Way of Creative Freedom.»

Credits

Everlasting Glory to God, Jesus Christ, The Holy Spirit, Ganesha, Shiva, Vishnu, Krisna, Laozi, Buddha, Bodhidharma, Ma Gcig, Hakuin, Ikkyu, Nagarjuna, Tilopa, Naropa, Milarepa, Suhrawardi, St Dismas, St Francesco, St Teresa, St John, St Filippo, Eckehart. All The Holy Divinities, Avatars, Saints, Mystics, and True Spiritual Masters. Because they are in the Eternal Light of Truth & Delight Enlightening a World of Darkness, Nescience, Blindness, Uneasiness and Falsehood!

Источник