- How to Use a Bluetooth Dongle on Windows or Mac
- Setting up the Dongle
- Using Bluetooth on Windows
- Using Bluetooth on Mac
- Community Q&A
- Can A Phone Be used As A Bluetooth Dongle? (Explained)
- Here’s how Bluetooth Dongle works
- So Can Phones be used as a Bluetooth Dongle?
- Simple steps on how to use your phone as a Bluetooth Dongle (2 ways)
- Method 1
- Items needed
- Step 1: Enable your phone’s Bluetooth
- Step 2: Connect the USB cable
- Step 3: Installing your Bluetooth phone
- Step 4: dial-up networking
- Step 5: Final setup
- Method 2: using an iPhone as a Bluetooth adapter
- Step 1: Setting up personal hotspot
- Step 2: Pairing your iPhone with a PC
How to Use a Bluetooth Dongle on Windows or Mac
This article was co-authored by wikiHow staff writer, Rain Kengly. Rain Kengly is a wikiHow Technology Writer. As a storytelling enthusiast with a penchant for technology, they hope to create long-lasting connections with readers from all around the globe. Rain graduated from San Francisco State University with a BA in Cinema.
The wikiHow Tech Team also followed the article’s instructions and verified that they work.
This article has been viewed 738,372 times.
A Bluetooth dongle is a small device that can receive and transmit Bluetooth signal. It usually connects to the USB port of your computer or laptop to support wireless (Bluetooth) devices such as keyboards, mice, and headphones. While the majority of modern computers incorporate Bluetooth functionality into their default hardware, you can use a Bluetooth adapter (or «dongle») to enable Bluetooth for computers that don’t use built-in Bluetooth. This wikiHow will show you how to use a Bluetooth adapter on your Windows or Mac computer.
- Purchase a Bluetooth dongle that supports 4.0 or higher and is compatible with your operating system. Put it in pairing mode.
- On Windows, open «Bluetooth & other devices.» Click «Connect,» then select the Bluetooth device.
- On Mac, click the «Apple» menu → «System Settings/Preferences» → «Bluetooth» → «Connect».
Setting up the Dongle
- Make sure you purchase a Bluetooth dongle that supports Bluetooth 4.0 or higher. Bluetooth 5.0 adapters are more expensive, but they offer greater range and speed. Bluetooth 4.0 adapters are more affordable and will work fine for most applications.
- You can also check if your computer has Bluetooth already.
- If your computer uses oval USB-C ports instead of rectangular USB 3.0 ports, you’ll also need to buy a USB to USB-C adapter for your computer.
- If you’re using a USB to USB-C adapter, first plug the USB-C end of the adapter into your computer, then plug the Bluetooth dongle into the free end of the USB adapter.
- To download the drivers from the manufacturer’s website, do the following:
- Use Google to search for the product name + «Drivers».
- Click a search result that leads to the manufacturer’s official website.
- Click the option to download the drivers.
- Once the installation file is downloaded, locate it in the Downloads folder.
- Double-click the installation file and follow the on-screen instructions.
Using Bluetooth on Windows
- On Windows 10, click the Start menu and click the cog icon to open Settings. From there, click Devices. You should automatically be on the Bluetooth & other devices page. [1] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
- On Windows 11, click the Start menu, select Settings, and then select Bluetooth & devices.
Turn Bluetooth on. If Bluetooth is not already turned on, click the toggle switch below «Bluetooth» to turn Bluetooth on.
Click Add Bluetooth or other device (Windows 10). If you’re using Windows 11, click + Add device instead.
Click Bluetooth . It’s in the pop-up menu. Your computer will begin searching for Bluetooth devices that are in pairing mode.
- If you don’t see your device’s name, try placing it in pairing mode again.
- On Windows 7 and below, you’ll need to click the device name and click Next. Then wait for it to pair.
Using Bluetooth on Mac
Community Q&A
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
Generally yes, you should be able to but this will depend on the dongle’s (or adapter’s) make and specifications and the television’s make and specifications. Check the manufacturer’s instructions to ensure that this is appropriate for your TV––most recent years sets should be fine. If it is okay according to those instructions, then the dongle would be inserted into the television’s USB port, usually located at the back or on the side of the TV set.
Thanks! We’re glad this was helpful.
Thank you for your feedback.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHowCan A Phone Be used As A Bluetooth Dongle? (Explained)
Disclaimer: This post may contain affiliate links, meaning we get a small commission if you make a purchase through our links, at no cost to you. For more information, please visit our Disclaimer Page.
A Bluetooth Dongle is a device that allows Bluetooth Wireless communications onto your personal computer. It’s essential for you if your Pc has no integrated Bluetooth. Without a Bluetooth dongle, you can always use your phone. To do that, you need a USB cable and a Bluetooth-enabled smartphone.
Unlike in the past, Bluetooth mobile wireless technology has now become very popular across the world today. It has become one of the best options for people looking to connect their electronic devices conveniently within a short-range.
One of the interesting things about Bluetooth technology is that it’s readily available and pretty easy to connect. It doesn’t require any installation of software. One good way to enjoy the benefits that come with using Bluetooth technology is by opting for a Bluetooth adapter or using devices with an integrated Bluetooth feature.
Today, there are many products out there that feature integrated Bluetooth. Some of them include laptops, a wireless technology PDA, smartphones, a wireless stereo headset, MP3 players, headsets, and many more. You can easily connect your electronic devices to any of the products below since they are Bluetooth-enabled.
As for Bluetooth adapters, also called Bluetooth dongles, they are specifically designed for products, without an integrated Bluetooth feature.
One of the importance of Bluetooth dongles is that they enable you to easily connect your Bluetooth wireless devices to your PC (those without an integrated Bluetooth capability).
Apart from that, Bluetooth adapters are also effective for connecting your devices without making use of wires and cables.
Here’s how Bluetooth Dongle works
First, you need to understand that Bluetooth Dongles are inexpensive and cost between $3 to $30. You can check for some of the best products on Amazon and Best Buy.
- To connect your Bluetooth adapter, you need a free port on your PC. If you have one, all you need is to plug the dongle into it.
- Some Windows, such as Windows 10 and Windows 8, should automatically recognize the adapter. However, if the dongle cannot run automatically, you need to install the latest drivers, which you’ll most likely get on the manufacturer’s website.
- After the installation process, you can go ahead and use the dongle device with your Bluetooth wireless device.
- Turn on the device you’re looking to connect to your PC and put it in its pairing mode.
- Now, find and click on the Bluetooth icon on your PC’s taskbar. After that, select “Add a Bluetooth device.”
- Now, locate and click “Add Bluetooth or other devices.” After that, you’ll be directed to a new page, where you’re required to click “Bluetooth”.
- From there, look for the item you’re looking to connect to your PC and select it. After that, pair the device and you’re good to start using the device for its intended purpose.
So Can Phones be used as a Bluetooth Dongle?
As you have seen above, a Bluetooth dongle is an effective device that you can take advantage of to connect your Bluetooth-enabled devices to your PC – which doesn’t have an integrated Bluetooth.
But here’s a burning question; without a Bluetooth Dongle, is there another device that could help connect your Bluetooth-enabled devices to your PC?
Even if you don’t have a Bluetooth Dongle, there’s another way you can connect your devices to a PC that has no integrated Bluetooth. All you need for this method are a Bluetooth-enabled smartphone and USB cable. Yes, with these two items, all you need is to perform a couple of settings on your PC and you’re good to start using your Bluetooth-enabled devices.
That said, the bottom line is that it’s very much possible to connect your Bluetooth-enabled devices to your PC, even if you don’t have a Bluetooth Dongle. Instead of the device, you can take advantage of your smartphone and a USB cable. Both items will certainly do the magic for you.
Simple steps on how to use your phone as a Bluetooth Dongle (2 ways)
As mentioned in the previous section of this post, you can always use your smartphone as a Bluetooth Dongle. But here’s a quick question; how exactly is that possible? You can check below to find everything you need to know about it:
Method 1
Items needed
For this process, you need a perfectly working USB cable. In addition to that, you need a Bluetooth-enabled smartphone and a PC.
Step 1: Enable your phone’s Bluetooth
For the first step, you need to turn on your smartphone and go to the Settings app. From there, locate and click on “Connections.” On the Connections page, you need to select “Bluetooth.” Lastly, click on the “Enable button” to turn on the Bluetooth option.
Step 2: Connect the USB cable
After enabling Bluetooth on your smartphone, the next thing you need is to connect the USB cable to the appropriate port on your laptop computer. However, before proceeding, you need to allow the USB cable to connect to your device from the Settings app. After that, attach the other end of the cable to your phone.
Step 3: Installing your Bluetooth phone
If you connect the USB cable properly to your phone and laptop, you should get a message, asking you to “Add a New Device” or “Add New Connection.” Click on the option and follow the instructions that follow to install your Bluetooth phone.
Step 4: dial-up networking
Currently, you’re two steps away from using your phone as a Bluetooth Dongle. The next step is known as the dial-up networking step.
For this stage, you need to first click on the Start button on your device. After that, locate and click on the “Computer” option. From there, you need to find your phone’s icon and right-click on it.
Next, look for the “Dial Up-Networking” option and click on it. After that, you need to fill in your details, such as username, phone number, and password.
Step 5: Final setup
The last step requires you to return to your “Computer” menu. Now, your laptop computer should be able to detect the Bluetooth-enabled devices available around you.
All you need now is to turn on the device you’re looking to connect and wait for your computer to detect it. Next, double-click the icon of the Bluetooth-enabled device and click to connect it.
Method 2: using an iPhone as a Bluetooth adapter
Step 1: Setting up personal hotspot
For the first step, you need to set up a personal hotspot. You can do that by following this step; Settings > Bluetooth. After that, toggle the Bluetooth button to enable it.
Next, you need to follow this step to set up the personal hotspot; Settings > General > Cellular > Personal Hotspot. After that, tap the “Personal Hotspot” button to switch it on.
Step 2: Pairing your iPhone with a PC
The next step involves pairing your iPhone with your PC. To do that, click the start button and type “Bluetooth.”
After that, open the Bluetooth app and click on the “Add a Bluetooth device” link. From there, find your iPhone device and click on it. You’ll get a pairing code; enter it in the “Bluetooth pairing dialog” on your iPhone. Next, tap on the “Pair” button.
Now, go back to your PC and follow this step; Start > Devices and Printers. You’ll get a list of various devices. Since you already paired your iPhone, look for it on the list and right-click it. Next, click “Properties.”
From the “Properties” page, look for a check box with “Wireless iAP”. Uncheck the box and click Ok.
Now, go back to the “Devices and Printers” dialog, look for your iPhone, and right-click on it. Next, click “Create Shortcut” to have your iPhone’s Bluetooth connection added to your desktop.
From your desktop, you can always access your iPhone’s Bluetooth connection and take advantage of it as your adapter.