What is wifi direct virtual adapter

What is «Microsoft Wi-Fi Direct Virtual Adapter» used for?

Microsoft Wi-Fi Direct Virtual Adapter is mainly used to create wireless hotspot and let other computers use internet through your computer.

This technology will virtualize your Wireless network adapter much in the same way VMWare/VirtualBox virtualizes your entire operating system. Once it has been virtualized, you can convert one physical wireless adapter into two virtual ones. This lets you to then connect one virtual wireless adapter to your regular wireless network and use the other virtual adapter to connect to another network such as an WiFi hotspot and let others to connect to your Windows machine wirelessly like they would connect to a normal AP.

You can do this from both GUI and cmd.

Solution 2

Virtual WiFi helps a user connect to multiple IEEE 802.11 networks with one WiFi card. It works by exposing multiple virtual adapters, one for each wireless network to which connectivity is desired. Virtual WiFi uses a network hopping scheme to switch the wireless card across the desired wireless networks. Switching between networks is transparent to the applications, such that the user feels she is connected to multiple wireless networks simultaneously. Virtual WiFi is implemented as an NDIS intermediate driver, and a user-level service in Windows XP. Virtual WiFi interacts with the card device driver at the lower end, and network protocols at the upper end. The buffering protocol is implemented in the kernel and the switching logic is implemented as a user-level service.

Источник

Top 3 Ways to Rectify Microsoft Wifi Direct Virtual Adapter Error

Microsoft wifi direct virtual adapter is used by a few people nowadays to create their own virtual internet adaptor.

We will discuss its uses, how to connect, disconnect and rectify the issues when it is not able to connect.

What is microsoft wifi direct virtual adapter

It is a virtual internet connection for other nearby devices of yours. Your main computer that is connected to a physical router connection, will serve as a host to provide a hotspot in terms of wireless connection to its surrounding devices.

The enabling and disabling of this virtual adapter is mostly done using the Command Prompt with administrator privileges.

How to establish a Microsoft wifi direct virtual adapter

You can establish a Microsoft wifi direct virtual adapter function in your device by using the following steps:

• Fetch for Device Manager in the search area, given at the bottom.
• After opening Device Manager, click on the “show hidden devices” under the View menu.
• Click on the arrow mark, next to the Network Adapters.
• From the list, right-click on the Microsoft wi-fi direct virtual adapter.
• Choose “Scan for hardware changes”.
• Close the Device Manager tab.
• Open Command Prompt, with Administrator privilages.
• This can be done by right clicking on Command Prompt and choosing Run as Admin.
• Type the following:
• netsh wlan show drivers
• Hit Enter button.
• netsh wlan set hostednetwork mode=allow ssid=SSIDname key=Password
• In place of SSIDname and Password, you have to type your ID and password, and press Enter.
• Type: netsh wlan start hostednetwork.

How to disable a Microsoft wifi direct virtual adapter

To temporarily disable the network:

• Open the Control Panel.
• Choose the “Network and Internet”.
• Click on “Chane Adapter Settings”, which will be on the left side.
• Select Delete, after right-clicking on the adapter.
• Refresh your computer.

To permanently disable it:

• In the search bar, type cmd or command, right click on the Command Prompt option.
• Choose, run as Administrator.
• Click “YES” from the next dialogue box.
• Type the following:
• netsh wlan set hostednetwork mode=disallow
• Hit enter

How to rectify Errors occurred during Microsoft wifi direct virtual adapter

To fix Missing Wireless Adapters on your computers:

Using Network Trouble Shooter:

• Open the Device Manager. From View tab, choose “Show hidden devices”
• Click on the Network Adapter.
• Choose the scan for hardware devices icon, from the top corner.
• Close the window.
• In the search bar, placed near the Task bar, search for “Find and fix Network Problems”.
• Hit Next.
• Choose “Troubleshoot my connection to internet”.
• This will automatically detect the problems and issues.

Using Command Prompt :

• Search for Command Prompt, and choose “Run as Administrator” after right-clicking on it.
• Type the following code:
• netsh winsock reset
• Hit Enter button.
• Restart your system.

If this did not help, then type or copy-paste the below code:

After applying the command, restart your device.

How to reconnect microsoft wi-fi direct virtual adapte r?

Reset the Network Adapter by using the below steps:

• In settings, select Network & Internet.
• Navigate to Status -> Advanced Network Settings -> Network Reset
• Hit the “Reset Now” Button.
• Click Yes.

Or you can just open the Command Prompt with Administrative privileges and type:

netsh wlan start hostednetwork

[Fixed] Someone keeps hacking my microsoft wi-fi direct virtual adapter

Turn off or disable your wi-fi Direct Virtual Adapter, as discussed earlier.

Change your IP Address by using the Command Prompt, or by downloading software that can change the IP Address.

Microsoft wifi direct virtual adapter code 45

It means that the driver of the Network Adapter is not connected to your system.

Open the Device Manager, fetch for the Wireless Adapter, uninstall it, and then restart your system. This should fix the problem.

Or else, enter in the BIOS/UEFI mode, Navigate through Peripherals->Network Setup

Choose Enable for everything.

Источник

What is «Microsoft Wi-Fi Direct Virtual Adapter» used for?

When I type ipconfig /all command in Windows command prompt, it shows some adapters with description of «Microsoft Wi-Fi Direct Virtual Adapter» (see image below). Where did they come from and what are they used for? How can I remove it and will it cause any issue if removed? I am sure that I only have one physical WiFi adapter in my laptop.

2 Answers 2

Microsoft Wi-Fi Direct Virtual Adapter is mainly used to create wireless hotspot and let other computers use internet through your computer.

This technology will virtualize your Wireless network adapter much in the same way VMWare/VirtualBox virtualizes your entire operating system. Once it has been virtualized, you can convert one physical wireless adapter into two virtual ones. This lets you to then connect one virtual wireless adapter to your regular wireless network and use the other virtual adapter to connect to another network such as an WiFi hotspot and let others to connect to your Windows machine wirelessly like they would connect to a normal AP.

You can do this from both GUI and cmd.

Virtual WiFi helps a user connect to multiple IEEE 802.11 networks with one WiFi card. It works by exposing multiple virtual adapters, one for each wireless network to which connectivity is desired. Virtual WiFi uses a network hopping scheme to switch the wireless card across the desired wireless networks. Switching between networks is transparent to the applications, such that the user feels she is connected to multiple wireless networks simultaneously. Virtual WiFi is implemented as an NDIS intermediate driver, and a user-level service in Windows XP. Virtual WiFi interacts with the card device driver at the lower end, and network protocols at the upper end. The buffering protocol is implemented in the kernel and the switching logic is implemented as a user-level service.

You must log in to answer this question.

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

Site design / logo © 2023 Stack Exchange Inc; user contributions licensed under CC BY-SA . rev 2023.7.14.43533

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Источник