Who is connected with my wifi

Как узнать, кто подключился к Wi-Fi сети. Who’s On My Wifi

Иногда нельзя с уверенностью сказать, что наша Wi-Fi сеть не используется другими компьютерами или устройствами. Это не только снижает пропускную способность сети, и потребляет трафик, но также подвергает риску ваши личные данные и сами устройства. Для отслеживания чужаков в сети можно воспользоваться условно-бесплатной программой Who’s On My Wifi. Эта программа предназначена для сканирования сетей, и является очень удобным инструментом не только для домашней сети, но и для небольших предприятий. Несмотря на название, сканируется не только Wi-Fi—сеть, но и проводная сеть Ethernet. Программа Who’s On My Wifi представлена в двух версиях: платная и бесплатная. Платная версия позволяет блокировать устройства в сети, будь то телефон, компьютер или принтер, а бесплатная позволяет сканировать сеть и отмечать устройства.

Процесс установки довольно прост, и можно просто нажимать «Далее» до завершения установки программы на компьютере. В процессе установки могут заинтересовать только место установки программы, и место, где будут храниться файлы данных.

Далее находим ярлык и запускаем программу. При первом запуске будет предложено пройти три шага мастера установки, но на самом деле это краткая инструкция по пользованию.

Нажимаем «Continue Setup» и переходим к пошаговой инструкции.

Шаг 1. В программе нажимаем «ScanNow», после чего будет просканирована вся сеть, и результаты будут представлены в таблице.

Шаг 2. Компьютеры и устройства, которые нам известны, нужно пометить как «KNOWN» (Известные). Для этого нужно просто кликнуть в нужной ячейке и выбрать значение. Определить устройство можно по MAC-адресу, или просто отключая устройства и сканируя сеть.

После этого необходимо сохранить изменения. Для этого нажимаем кнопку «SaveChanges».

Шаг 3. Сканируем сеть ещё раз и удостоверяемся, что неизвестных устройств больше нет. Эти устройства теперь будут отмечены жёлтым цветом.

Свои устройства для удобства можно пометить, кликнув два раза в поле «Discription».

Шаг 4. Теперь программу можно свернуть, и она будет работать в фоновом режиме. Сканирование сети по умолчанию происходит каждые 5 минут, и если в сети вдруг появится новое устройство, программа сразу сообщит об этом.

Кроме того, в программе можно посмотреть логи, менять диапазон IP-адресов и частоту сканирования. Для особенно искушённых пользователей есть некоторые дополнительные инструменты в меню «Настройки».

Источник

5 Ways To Check Who’s Connected to Your Wi-Fi Network

Wifi security has always been a concern for the users, be it Wifi security protocols or the shared Wifi keys being compromised and misused. Setting up a Wifi connection with proper security is one thing and monitoring your network for intruders and illegal connections is another.

In this article, we will discuss about how to check Wi-Fi status on regular basis and even be alerted if a new device has connected to the network. This monitoring will give you peace of mind that no unwanted device is connected to your network.

Check Wi-Fi Status

Let’s see, which tools are on the list to help you.

Wi-Fi Inspector

Wi-Fi Inspector as the name suggests that it can make you able to view and analyze your network’s information and status easily. This tool is a freeware and available for Windows and Mac Operating Systems.

It gives you real-time monitoring of your network connection and ensures you that you are using the best and fastest performance of your wireless network. It supports the latest Wi-Fi standards that are 802.11ac Wave 1 and Wave 2 technology.

• It searches for Wi-Fi networks automatically and quickly.
• Wi-Fi Inspector troubleshoots Wi-Fi connectivity issues with its built-in troubleshooter and easy to use troubleshooting tools
• Verify Wi-Fi coverage (site survey)
• You may control a laptop’s Wi-Fi connection with it.
• Helps in locating Wi-Fi devices
• Detects unauthorized APs and verify AP settings
• Ensures high performance of your network

Before installing Wifi Inspector, you should make sure that you are fulfilling the following requirements:

• You should be running Windows 7 and later or Mac OSX 10.10 (Yosemite) or 10.11 (El Capitan).
• Wi-Fi adapter is required, which can be either built-in or external
• Adobe Flash Player for running Speed Test is needed.
• For Windows, Microsoft .NET Framework 4.5 or later is required.

Wireless Network Watcher

Wireless Network Watcher monitors the connected devices to the wireless router. If some unknown has connected to your network, you can easily check it via this tool and then can take any step according to your need. Firstly, it scans the network connection and then displays the list of all connected devices on that network.

It also gives you some other information like IP address, MAC address, the company that manufactured the network card, and optionally the computer name.

Wi-Fi Doctor-Detect and Boost

Wi-Fi Doctor-Detect and Boost is the small utility that detects the connected devices on your wireless network. It protects all the devices which are connected to your network by scanning them time to time. It shows device brand and MAC in details,

If any useless app is opened in the background, this tool will close those apps to increase the speed of network for a particular task which is running in the foreground. This app is basically designed for smartphones and tablets which are running on Android OS. The main features of the Wi-Fi Doctor-Detect and Boost tool are

• Wi-Fi Security Check: It checks whether the Wi-Fi you’re connected to is safe.
• Increase Network Speed: It increases the speed of network by detecting and stopping apps that are secretly using Wi-Fi or cellular data in the background.
• Wi-Fi Spy Detect: Scan all devices connected to your Wi-Fi hotspot, including Android Phones, iPhones/iPads, PCs.
• Super Boost: Super Boost feature stops the apps from re-launching which automatically re-launch themselves in the background without authorization.

SoftPerfect Wi-Fi Guard

The SoftPerfect Wi-Fi Guard is a small and handy tool for everyone running a small wireless network and that keeps your network safe and secure. Generally, modern Wi-Fi networks and routers are well protected, but despite all these securities, there are chances for security leaks and issues. This includes vulnerabilities in encryption and brute force attacks. As a result, someone can gain unauthorized access to your Internet connection and LAN and hack your network and can use it for any purpose.

To avoid all these issues, the SofPerfect Wi-Fi Guard will help you and secure your wireless network connection.

It is supported on multi-platform and this is the good thing about the tool.

• pings computers and other network devices and displays those alive.
• Detects firewalled computers that do not respond to ping.
• Scans your network at a specified interval.
• If an unknown device is found, it immediately alerts you.

Who’s On My Wi-Fi

Who’s on My Wi-Fi is a tool to tell you who is connected to your Wi-Fi network then. You can take action if any, unknown is also using your wireless connection.

It is a freeware and can run on Windows Vista and later version of Windows.

Which tool do you use to check the Wifi status and monitor your network for security issues? My personal favorite is Wireless Network Watcher because it is a portable app. I can keep it in my network drive to access it from any PC over the network.

Источник

How to See Who Is Connected to Your Wireless Network

This article was co-authored by wikiHow staff writer, Travis Boylls. Travis Boylls is a Technology Writer and Editor for wikiHow. Travis has experience writing technology-related articles, providing software customer service, and in graphic design. He specializes in Windows, macOS, Android, iOS, and Linux platforms. He studied graphic design at Pikes Peak Community College.

The wikiHow Tech Team also followed the article’s instructions and verified that they work.

This article has been viewed 904,116 times.

Do you suspect that someone is using your Wi-Fi? There are several ways to find out which devices are connected to your wireless network, and they are all simple no matter how technical you are. This wikiHow guide will show you easy ways to see all computers, phones, printers, and other devices connected to your wireless network.

Using Your Wireless Router

Open a browser. You can use a web browser to log in to the web interface for your wireless router. You can use the web interface to set up and configure your wireless network and check who is connected to your wireless router.

• Common router IP addresses include 192.168.1.1, and 10.0.0.1.
• You can find your router’s IP address using the Command Prompt on Windows. Open the Start menu and type CMD to display the Command Prompt. Click it to open it. Then type ipconfig /all and press ↵ Enter . Look for the IP address to the right of «Default Gateway»

• If you notice any devices that don’t belong, be sure to change your Wi-Fi password. Be sure to use WPA2-PSK encryption if it is available. This will force all connected devices to re-enter the new password to reconnect.

Using Command Prompt

• On Mac, you can do this in the terminal. Click the magnifying glass icon in the upper-right corner and type terminal in the search bar and then click the terminal.

• Every device that connects to the internet has a unique MAC address. Generally, you can find the MAC address for a device in the Settings menu under the Network or Internet Settings, or the about device info. You can find the MAC address for Windows, Mac, iPhone, Samsung Galaxy.

Using Wireless Network Watcher (Windows Only)

Scroll down and click Download Wireless Network Watcher with full install . It’s the second link below «Feedback» on the page.

Click the install file and follow the instructions. By default, your downloaded files can be found in your Downloads folder. Click the file that says «wnetwatcher_setup.exe». This opens the Wireless Network Watcher installer. Follow the on-screen instructions to finish the installation. Wireless Network Watcher will open when it finishes installing.

• Use the «Device Name» column to see the name of each device connected to the network and the router it’s connected to.

Click the ‘Play’ triangle icon. It’s in the upper-left corner of Wireless Network Watcher. This rescans your network and displays a list of connected devices.

Community Q&A

You could download your router’s management app and then view the connected devices list on your phone. Check your router’s setup guide to see which app you need to download.

Thanks! We’re glad this was helpful.
Thank you for your feedback.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

They will show up on the hotspot’s device list. You may have to log into it, or if it is on your phone, it should be displayed in your phone’s menu.

Thanks! We’re glad this was helpful.
Thank you for your feedback.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

It’s possible that it is a device that you don’t remember. But it’s also possible that you have a network intruder. I would recommend changing your Wi-Fi password (make sure to use WPA2), and then reconnecting all of your devices.

Thanks! We’re glad this was helpful.
Thank you for your feedback.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

Источник