Wi fi development kit

PremierWave Evaluation Kit

The most feature-rich, deployment-ready Wi-Fi ® System On Module!

For PremierWave Embedded Linux Wireless System On Module

PremierWave Evaluation Kit Overview

The PremierWave Development Kit is designed to deliver a new dimension of Wi-Fi networking with the highest levels of security to virtually any device or electronic product. PremierWave EN and PremierWave SE1000 provides affordable connectivity in a compact form factor, enabling OEMs to add Wi-Fi or wired Ethernet networking to their products on a single PCB design. With a choice of flexible, media-independent modules ranging from Ethernet, Wi-Fi and ultra-secure Wi-Fi, the PremierWave product takes the complexity out of RF design and networking.

PremierWave Evaluation Kit Downloads

PremierWave Evaluation Kit Part Numbers

no module development kit

• PremierWave EN Evaluation Board
• Power Supply
• RS-232 Cable
• Cat5e Cable
• USB Cable (A-B)
• Antenna

Related Products

Lantronix’s Full Solution & Service Offering

Increase your operational efficiency and create new revenue generation streams with our ready-to-use software platform for your IoT and REM assets.

Our IoT cellular platform simplifies connecting your global IoT fleet, on every network, using a single SIM.

Источник

RS9113-N00-DXF-EVB

The RS9113 based FIPS 140-2 Level 1 validated Wi-Fi modules based on Silicon Labs’ RS9113 ultra-low-power Convergence SoC. These modules offer dual-band 1×1 802.11n wireless connectivity. They are high performance, long-range and ultra-low-power wireless modules and include a multi-threaded MAC processor called ThreadArch®, digital and analog peripheral interfaces, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI flash.

The module’s embedded firmware includes the WLAN protocol stack along with support for WPA/WPA2-PSK and WPA/WPA2-Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAP) security algorithms. It is a fully-integrated solution for secure embedded low-end wireless applications. The wireless modules can be connected to 8/16/32-bit host processors through SPI, UART, USB and USB-CDC interfaces.

OVERVIEW

TECH DOCS

SOFTWARE & TOOLS

COMMUNITY & SUPPORT

OVERVIEW

Development Kit Contents:

• RS9113 Module Evaluation Board
• USB Pen Drive
• Micro A/B-type USB cable
• SDIO Adaptor Cable
• SPI Adaptor Cable
• Female — Female Cables

Kit Features:

• *FIPS 140-2 Level 1 Certification for modules with and without antenna
• FIPS Approved and non-FIPS Approved modes of operation
• 802.11 a/b/g/n operation over 2.4 GHz and 5 GHz bands
• Two module variants: with and without integrated antenna
• Ultra low power operation with power save modes
• Module supports single supply
  3.0 to 3.6 V operation

Network Standard Support:

• 802.11n: from 6.5 Mbps to 72.2 Mbps (MCS 0-7)
• 802.11a/g: from 6 Mbps to 54 Mbps
• 802.11b: from 1 Mbps to 11 Mbps

Modulation Techniques:

802.11n Advanced Features:

• 1-SS
• Greenfield Preamble
• Short-GI
• 1 spatial stream
• STBC
• RIFS
• A-MSDU
• A-MPDU
• Aggregation with Block-ack
• A-MSDU inside
• A-MPDU
• Virtual AP support

• IPv4 and IPv6
• DHCP Server/Client
• HTTP Server/Client
• Static and Dynamic Webpages with JSON Objects (for HTML Server)
• ICMP
• Websockets
• DNS Client
• IGMP
• SNMP

FIPS Approved Algorithms:

• AES with 128-bit key and 256-bit key in CBC mode Encrypt/Decrypt
  • Key wrapping (Cert. #3299)
  • AES CCM (Cert. #3300)
  • AES-128 CMAC (Cert. #3316)
  • SHA-1, 256 (Cert. #2628)

  Non-approved Algorithms allowed in FIPS mode:
  

  • Hardware non-deterministic random number generator (for seeding Approved DRBG)
  • Diffie-Hellman (key agreement; key establishment methodology provides 112 bits of encryption strength)
  • RSA (key wrapping; key establishment methodology provides 112 bits of encryption strength)

  Non-approved Algorithms, allowed only in non-FIPS mode:
  

  Power-up Self Tests in FIPS mode:
  

  • Cryptographic Algorithm Tests:
    • SHA1 KAT
    • SHA256 KAT
    • HMAC-SHA1 KAT
    • HMAC-SHA256 KAT
    • RSA 2048 Signature Generation KAT
    • RSA 2048 Signature Verification KAT
    • AES-128 CBC Encrypt KAT
    • AES-128 CBC Decrypt KAT
    • AES-256 CBC Encrypt KAT
    • AES-256 CBC Decrypt KAT
    • SP800-38F AES Key Wrap Encrypt KAT
    • SP800-38F AES Key Wrap Decrypt KAT
    • SP800-90 DRBG KAT
    • SP800-135 TLS KDF KAT
    • SP800-108 KDF KAT
    • ES-CCM KAT
    • Firmware integrity test (32-bit checksum)
    • Boot-loader integrity test (32-bit checksum)
    • SHA1 checksum of configuration parameters

    Conditional Tests in FIPS mode:
    

    • Firmware load test: AES CMAC Test
    • Manual key entry test: 256-bit PSK
    • Continuous random number generator tests
      • Continuous test on SP800-90 DRBG
      • Continuous test on non-Approved NDRNG

      Regulatory Certification:
      

      • FCC (ID is XF6-RS9113DB)
      • IC (ID 8407A-RS9113DB)
      • CE/ETSI
      • TELEC
      • SRRC

      Typical Transmit Power(+/-2 dBm):
      

      • Wi-Fi: 18 dBm for 802.11b DSSS
      • 17 dBm for 802.11g/n OFDM
      • 12 dBm for 802.11a/n OFDM

      RX sensitivity (+/- 1dBm):
      

      Источник

      WiFi 802.11b/g/n Development Kit

      

      Add wireless capability to your NetBurner module in minutes!

      With the NetBurner 802.11b/g/n Wireless Solution installed, your NetBurner Ethernet Module can have both Ethernet and WiFi communication active at the same time. The software programming is minimal; once you add the second network interface, your network and web server communication will be routed automatically.

      Description

      NBWIFIIN Datasheet 5296 downloads

      Ready to build products?

      Take a look at volume pricing for the NBWIFIIN 802.11b/g/n. Click here for additional product information

      Related

      Specifications

      IEEE 802.11 b/g/n, 2.4 GHz RF band mode PA

      128 bit WEP, WPA-PSK (TKIP), WPA2-PSK Authentication

      30 mm (-/+0.5) x 14.5 mm (-/+0.5) x 2.5 mm (± 0.2) (millimeters)

      Documents and Downloads

      NBWIFIIN Schematic 1261 downloads

      NBWIFIIN Hardware Configuration 1125 downloads

      NBWIFIIN Quick Start Guide 5794 downloads

      NBWIFIIN Programmers Guide 1656 downloads

      NBWIFIIN Datasheet 5296 downloads

      macOS Big Sur PCN 16846 downloads

      Custom Baud Rates 15841 downloads

      uCOS Library 20019 downloads

      SerialDownload Pdf 24251 downloads

      Writing Assembly Code for the NetBurner Coldfire Platform 20495 downloads

      Network Security Libraries 22186 downloads

      Network Programming Examples 15561 downloads

      Network Programming Guide 15482 downloads

      Debugging Network Communications 8174 downloads

      NNDK Installation Notes 4560 downloads

      MTTTY Download 63902 downloads

      MTTTY Serial Terminal 23587 downloads

      AutoUpdate (Windows) 22009 downloads

      AutoUpdate (OS X) 16324 downloads

      IP Setup 49594 downloads

      Virtual COMM Port Driver (Windows 7 — 10) 93137 downloads

      Related

      Comparison Table

      Part Number	Creates Applications for the Listed Platforms	TCP/IP Stack	SSL/TLS and SSH	SNMP Option	Wireless Option	IDE Graphical Debugger
      NNDK-NBWIFIIN-UFL-KIT	NBWIFI SOM UFL Version	Standard Network Platform

      Related

      Reviews

      You must be logged in to post a review.

      Related products

      SB70 LC Development Kit

      CB34 EX Development Kit

      PK70 EX NTP Time Server Development Kit

      Designed and Manufactured
      with care in San Diego, USA.

      To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.

      The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.

      The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.

      The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.

      The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.

      To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.

      The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.

      The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.

      The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.

      The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.

      Источник

      ESP32-A1S Wi-Fi+BT Audio Development Kit

      

      ESP32-A1S is an ultra-small multi-functional audio module. It adopts ESP32 with dual-core processor as the main control. The main frequency is up to 600DMIPS. The module is internally equipped with 4M PSRAM and CodeC audio processing chip, which can be widely used for IoT.

      ESP32-Audio-kit is a small size audio development board based on ESP32-A1S from Ai-Thinker, most of the interfaces are distributed at the edges. Supports TF card, LINEIN and 2-way Mic input; support 1 channel headphone output and 1 chanel left and right speaker output, facilitate rapid development, can be widely used in various IoT applications, suitable for home smart devices, smart Audio, story machine solutions, etc.

      • Low power dual core 32-bit CPU,can also serve the application processor
      • Up to 240MHz clock speed，Summary computing power up to 600 DMIPS
      • Built-in 520 KB SRAM, external 8MPSRAM
      • Supports UART/SPI/I2C/PWM
      • 3.5mm headphone jack, support left and right chanel output.
      • left/right channel of speaker, support max 4Ω3W output
      • Support LINEIN and 2-way Mic input
      • Support 3.7V Li-ion battery or up to 5V2A power input, support battery charging
      • Support 64G SD card; 6 onboard buttons
      • Supports multiple sleep modes
      • Embedded Lwip and FreeRTOS
      • Supports STA/AP/STA+AP operation mode
      • Support Smart Config/AirKiss technology
      • Support secondary development

      

      The board in on sale for 16.90 USD, found on seeedstudio.com

      Источник