- Wi fi роутер totolink a3002ru настройка
- Title
- How to set up the router to work as a AP mode?
- How to setup TOTOLINK Router on App
- A3002RU TR069 Configuration
- How to set up static DHCP
- How to set up static DHCP?
- How to use the router’s WPS button?
- How to login to router by manually configuring IP?
- Introduction to the four Operation Mode of the router
- What if the Router can’t log in to the new Chrome?
- How to synchronize the router’s system time with internet time?
- A3002RU
- Двухдиапазонный гигабитный беспроводной маршрутизатор
Wi fi роутер totolink a3002ru настройка
— Complies with IEEE 802.11ac/a/b/g/n standards.
— Delivers 300Mbps data rate on 2.4GHz and 867Mbps on 5GHz simultaneously.
— Advanced MIMO technology ensure greater range and stable connection.
— Support DHCP, Static IP, PPPoE, PPTP and L2TP connection mode.
— Support Ipv6 protocol, DHCP/Static IP/PPPoE.
— Provides 64/128-bit WEP, WPA, WPA2 and WPA/WPA2 security.
— Connects to secure network easily and fast using WPS.
— Multi-SSID allows user to create multiple SSIDs according to their needs.
— Supports VLAN function for IPTV and other internet services.
— Universal repeater and WDS function for easy Wi-Fi extension.
— Supports TR-069 protocol for remote centralized management.
— Supports IP, Port, MAC, URL filtering and Port Forwarding.
— QoS: Bandwidth Control based on IP/MAC.
— The USB 2.0 port supports FTP Service, Samba Service and DLNA Service.
— Easy setup simplifies the basic settings of the router.
— 2 *5dBi Fixed Antennas (2.4G),
— 7.2 x 5.3 x 1.0 in. ( 182.3 x 133.8 x 25.9mm)
— Static DHCP Setting, IPTV, IPV6
— Static IP, DHCP, PPPoE/Russia PPPoE, PPTP/Russia PPTP, L2TP/Russia L2TP
— Virtual Server(Port Forwarding) ,
— Quick Installation Guide *1
— Operating Temperature: 0℃~40℃ (32 ℉~122℉)
— Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)
— Operating Humidity: 10%~90% non-condensing
— Storage Humidity: 5%~90% non-condensing
Title
How to set up the router to work as a AP mode?
Application introduction:
AP mode,connect the superior AP/Router by wire, you can bridge the superior’s AP/Router wired signal into wireless Wi-Fi signals for Wi-Fi devices. Here we take A3000RU for demonstration.
Note: Confirm that your wired network can share the Internet.
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168. 0 .1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP- 2 :
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN .
STEP- 3 :
Enter the Advanced Setup page of the router, then follow the steps illustrated.
①Click Operation Mode >②Select AP Mode ->③Click Apply button.
STEP- 4 :
Next set the wireless SSID and password. Finally click Connect.
STEP- 5 :
Congratulations! Now all your Wi-Fi enabled devices can connect to the customized wireless network.
After the AP mode is set successfully, you cannot log in to the management page. If you need to make changes, please Reset the router.
How to setup TOTOLINK Router on App
It is suitable for: TOTOLINK router
Application introduction:
This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.
STEP-1: Follow the steps below to connect your router.
STEP- 2 : Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.
STEP- 3 : Launch the Tether App on your phone.
STEP- 4 : Select your TO TOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.
STEP- 5 : Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)
STEP- 6 : Quick Setup.
STEP- 7 : More features: Click Application or Tools.
STEP-8: Binding router, remote management.
A3002RU TR069 Configuration
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A702R, A3002RU
Application introduction: This tutorial will show you how to configure TR069 feature on TOTOLINK Router devices.
STEP-1: Install router as the following diagram
The router WAN IP and TR069 server IP must be on the same network segment or can access each other; TR069 server needs to turn off the firewall and other functions.
STEP- 2 : Login r outer
Access Login page (Default IP: 192.168.0.1) and then you need enter the Administrator information (Default ID and Password is admin).
STEP- 3 : WAN settings
Go to the Advanced Setting page, setup the WAN information.
STEP- 4 : TR069 settings
Next, setup the TR069 information.
R069 – Connection Information
How to set up static DHCP
It is suitable for: N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850R, A3002RU
STEP-1: Connect your computer
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN .
Enter advanced settings to select the LAN settings in Network,click the Set Static DHCP.
Checklist the Enable Static DHCP to open the setting,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.
How to set up static DHCP?
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU
STEP-1: Connect your computer
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP- 2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN .
Enter advanced settings to select the LAN settings in Network,click the Set Static DHCP.
Checklist the Enable Static DHCP to open the setting,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.
How to use the router’s WPS button?
It is suitable for: All TOTOLINK routers
Application introduction
This article describes how to quickly make a wireless connection through the router’s WPS button.
l Please make sure your router has WPS button before setting .
l Please make sure your wireless client supports WPS functionality before setting.
STEP- 2 :
Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.
Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.
STEP- 3 :
After pressing the WPS button, use w ireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example . As shown below.
3-1. Computer wireless connection:
3-2. Mobile phone wireless connection:
How to login to router by manually configuring IP?
It is suitable for: All TOTOLINK routers
STEP-1: Connect your computer
Connect to the router’s LAN port with a network cable from a computer network port (or to search for and connect the router’s wireless signal).
STEP- 2 : Assigned manually IP Address
2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254 ) , the Subnet Mask is 255.255.255.0 and Gateway is 192.168. 1 .1.
2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.
STEP- 3 : Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example .
STEP- 4 : After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.
Note: Your terminal device must choose to obtain an IP address automatically to access the network.
Introduction to the four Operation Mode of the router
It is suitable for: All TOTOLINK routers
Application introduction
This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.
STEP-1: Router Mode (Gateway mode)
Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.
STEP- 2 : Repeater mode
Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.
STEP- 3 : AP mode (Bridge mode)
AP mode, the router acts as a wireless switch, you can transfer the superior’s AP/Router wired signal into wireless signal.
STEP- 4 : WISP Mode
WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.
FAQ Common problem
Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?
A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.
Q2: How to enter the router management interface in AP mode/Repeater mode?
A: Refer to FAQ#How to login to router by manually configuring IP
What if the Router can’t log in to the new Chrome?
It is suitable for: All TOTOLINK Router
Application introduction
After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.
Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password.
STEP-1: C hange browser and clear browser cache
Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache.
Delete cookies on the web browser. Here we take Firefox for example.
Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.
STEP- 2 : Enter 192.168. 0 . 1 into the address bar of your browser. Log in the settings interface.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
Method Two: login via tablet/Cellphone
STEP-1: C hange browser and clear browser cache
Try other browser, such as Firefox, Opera, etc., and clear your browser cache.
STEP- 2 : Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
How to synchronize the router’s system time with internet time?
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU
Application introduction
You can maintain the system time by synchronizing with a public time server over the Internet.
STEP- 1: Login to the TOTOLINK router in your browser.
STEP- 2 : In the left menu, click System -> Time Zone Setting , follow the steps below.
Before time Zone Setting, you need to confirm that the router is connected to the internet.
A3002RU
Двухдиапазонный гигабитный беспроводной маршрутизатор
- Одновременная работа каналов 5 ГГц (867 Мбит/с) и 2.4 ГГц (300 Мбит/с) с суммарной скоростью 1167 Мбит/с
- 5 гигабитных Ethernet портов для высокой скорости передачи данных
- Поддержка DHCP , Static IP , PPPoE , PPTP и L 2 TP
- Поддержка 64/128-битного шифрования WEP , WPA и WPA 2
- Порт USB 2.0 с поддержкой FTP , Samba и DLNA
- Поддержка функций Universal Repeater, WDS, Multiple SSIDs, WPS и Wireless Scheduler
- Описание
- Основные характеристики
- Технические характеристики
- Скачать файлы
- Обзоры
- Вопрос/ответ
- Где купить
A3002RU – Двухдиапазонный беспроводной гигабитный маршрутизатор, поддерживает стандарты IEEE 802.11ac/a/b/g/n.
- Поддержка стандартов IEEE 802.11ac/a/b/g/n.
- Скорость передачи данных до 300Mbps на 2.4GHz и 867Mbps на 5GHz.
- Поддержка технологии MIMO.
- Поддержка DHCP, Static IP, PPPoE(dual access), PPTP(dual access), L2TP(dual access).
- Шифрование 64/128-bit WEP, WPA, WPA2 и WPA/WPA2.
- Простое и удобное подключение к сети WiFi по кнопке WPS.
- Multi-SSID организация нескольких WiFi сетей.
- Поддержка VLAN.
- Поддержка TR-069 протокол провайдерского уровня.
- Поддержка фильтрации IP, Port, MAC, URL и перенаправления портов.
- QoS: контроль пропускной способности.
- USB 2.0 обеспечивает сервисы FTP, Samba и DLNA.
Аппаратная часть
2 *5dBi Фиксированных антенн (2.4G),2 *5dBi Фиксированная антенна (5G)
1 *RST, 1* WPS, 1* Power On/Off
1 *Power, 1 *CPU, 1 *2.4G Wireless, 1 *5G Wireless, 1 *WAN,
Беспроводная связь
IEEE 802.11ac, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g ,IEEE 802.11n