Wifi aircrack ng windows

Installing Aircrack-ng from Source

LibNetlink 1 (libnl-dev) or 3 (libnl-3-dev and libnl-genl-3-dev) development packages. It can be disabled by passing –disable-libnl to configure.

Kernel headers and gcc as well as make have to be installed on your system (build-essential on Debian based distributions)

Windows (Cygwin)

MacOS

Install the following via Homebrew (brew):

FreeBSD, OpenBSD, NetBSD, Solaris

Install the following via pkg:

Optional stuff

If you want SSID filtering with regular expression in airodump-ng (-essid-regex) pcre development package is required.

If you want to use airolib-ng and ‘-r’ option in aircrack-ng, SQLite development package >= 3.3.17 (3.6.X version or better is recommended)

If you want to use Airpcap, the ‘developer’ directory from the CD is required. It can be downloaded here.

For best performance on FreeBSD (50-70% more), install gcc5 via: pkg install gcc5 Then compile with: gmake CC=gcc5 CXX=g++5

hwloc: strongly recommended, especially on high core count systems where it may give a serious performance boost

Compiling and installing

Current version

wget https://download.aircrack-ng.org/aircrack-ng-1.7.tar.gz tar -zxvf aircrack-ng-1.7.tar.gz cd aircrack-ng-1.7 autoreconf -i ./configure --with-experimental make make install ldconfig

Compiling with AirPcap support (cygwin only)

Compiling on *BSD

Commands are exactly the same as Linux but instead of make, use gmake (with CC=gcc5 CXX=g++5 or any more recent gcc version installed).

Compiling on MacOS

Commands are exactly the same as Linux

Latest Git (development) Sources

Note: Compilation parameters can also be used with the sources from our git repository.

git clone https://github.com/aircrack-ng/aircrack-ng cd aircrack-ng autoreconf -i ./configure --with-experimental make make install ldconfig

./configure flags

When configuring, the following flags can be used and combined to adjust the suite to your choosing:

with-airpcap=DIR: needed for supporting airpcap devices on windows (cygwin or msys2 only) Replace DIR above with the absolute location to the root of the extracted source code from the Airpcap CD or downloaded SDK available online. Required on Windows to build besside-ng, besside-ng-crawler, easside-ng, tkiptun-ng and wesside-ng when building experimental tools. The developer pack (Compatible with version 4.1.1 and 4.1.3) can be downloaded at https://support.riverbed.com/content/support/software/steelcentral-npm/airpcap.html

with-experimental: needed to compile tkiptun-ng, easside-ng, buddy-ng, buddy-ng-crawler, airventriloquist and wesside-ng. libpcap development package is also required to compile most of the tools. If not present, not all experimental tools will be built. On Cygwin, libpcap is not present and the Airpcap SDK replaces it. See –with-airpcap option above. On debian based distro, install libpcap-dev

with-ext-scripts: needed to build airoscript-ng, versuck-ng, airgraph-ng and airdrop-ng. Note: Each script has its own dependencies. Note: It’s only required in install phase.

with-gcrypt: Use libgcrypt crypto library instead of the default OpenSSL. And also use internal fast sha1 implementation (borrowed from GIT) Dependency (Debian): libgcrypt20-dev

with-duma: Compile with DUMA support. DUMA is a library to detect buffer overruns and under-runs. Dependencies (debian): duma

with-avx512: On x86, add support for AVX512 instructions in aircrack-ng. Only use it when the current CPU supports AVX512.

with-static-simd=: Compile a single optimization in aircrack-ng binary. Useful when compiling statically and/or for space-constrained devices. Valid SIMD options: x86-sse2, x86-avx, x86-avx2, x86-avx512, ppc-altivec, ppc-power8, arm-neon, arm-asimd. Must be used with –enable-static –disable-shared. When using those 2 options, the default is to compile the generic optimization in the binary. –with-static-simd merely allows to choose another one.

enable-maintainer-mode: It is important to enable this flag when developing with Aircrack-ng. This flag enables additional compile warnings and safety features.

Troubleshooting Tips

error while loading shared libraries: libaircrack-ng.so.0

Run ldconfig as root or with “sudo” to solve the issue.

«command not found» error message

After you do “make install” then try to use any of the Aircrack-ng suite commands, you get the error message “command not found” or similar. Your system will look for the Aircrack-ng commands in the directories defined by the PATH command.

Normally, the Aircrack-ng suite programs and man pages are placed in:

/usr/local/bin /usr/local/sbin /usr/local/man

On your system, to determine which directories have the Aircrack-ng programs enter the following. If using “locate” be sure to first run “updatedb”.

locate aircrack-ng locate airmon-ng

find / -name aircrack-ng find / -name airmon-ng

Once you know the directories (exclude the source directories) then determine which directories are in your PATH. To see which directories are included in PATH on your particular system enter:

It should show something like:

/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

At this point compare the actual locations with the directories in your PATH. If the directories are missing from your PATH then you have a few options:

Add the directories to your PATH. See the one or more of the following web sites for details of how to do this:

https://www.cyberciti.biz/faq/howto-print-path-variable/ http://www.troubleshooters.com/linux/prepostpath.htm

Change to the particular directory with “cd” and then run the commands from within the directory. Don’t forget to add “./” in front of each command.

Specify the full path for each command. So if Aircrack-ng is located in the “/usr/local/bin” directory then run the command as “/usr/local/bin/aircrack-ng”.

Installing pre-compiled binaries

Linux/BSD/OSX

With the exception of Linux penetration testing distributions, packages are usually out of date (MacOS is the exception). In this case, uninstalling the package and installing from sources is the recommended way to go.

On MacOS, install it is via Macports or brew. Simply do “brew install aircrack-ng” or “sudo ports install aircrack-ng”

Windows

The Windows version of the Aircrack-ng suite does not have an install program. You must manually install (unzipping archive) the software.

Here are the steps to follow for Windows:

Download the latest version of the Aircrack-ng suite for Windows to your computer. The link for the zip file can be found on the Wiki home page.

Unzip the contents of the Aircrack-ng zip file into “C:\”. This will create a directory called “aircrack-ng-1.6-win”. This directory name will vary based on the exact version that you downloaded. This main directory contains three subdirectories — “bin”, “src” and “test”.

Prior to using the software, make sure to install the drivers for your particular wireless card. See this link for the instructions. We currently only support Airpcap; other adapters may be supported but require development of your own DLL so the different tools can interact with it.

To now use the Aircrack-ng suite, start Windows Explorer and double click on Aircrack-ng GUI .exe inside “bin” subdirectory. The GUI requires .NET version 4.6.1 to run.

Alternatively, open a command prompt (Start menu → Execute → cmd.exe) and change to the “C:\aircrack-ng-1.6-win\bin” directory and execute the individual commands.

Important notes:

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International

Источник

Description

Aircrack- ng is a complete suite of tools to assess WiFi network security.

It focuses on different areas of WiFi security:

• Monitoring: Packet capture and export of data to text files for further processing by third party tools
• Attacking: Replay attacks, deauthentication, fake access points and others via packet injection
• Testing: Checking WiFi cards and driver capabilities (capture and injection)
• Cracking: WEP and WPA PSK (WPA 1 and 2)

All tools are command line which allows for heavy scripting. A lot of GUIs have taken advantage of this feature. It works primarily on Linux but also Windows, macOS, FreeBSD, OpenBSD, NetBSD, as well as Solaris and even eComStation 2.

Fresh news

We’re moving from our old trusty forum to GitHub Discussions partly due to the maintenance burden, which means new posts should be opened in the Discussions tab of our repository. The old forum will become a static archive so the links to the posts won’t become 404.

After more than 2 years, we are making a release with a decently large amount of fixes, improvements, and additions. We also broke the 4000 commits barrier, and this release has more than 400 commits.

Under the spotlights

Learn WiFi penetration testing with the author and lead developer of Aircrack-ng. WiFi Exploitation 101, covers topics ranging from WiFi basics to WPA Enterprise exploitation, and is available as a 1-day live online class, with 10 hands-on labs.

If you are having issues injecting or if you are receiving an error message talking about channel -1 or fixed channel in airodump-ng (top right of the screen) or aireplay-ng, kill the network managers using airmon-ng check kill before putting the wireless card in monitor mode.

Источник

Description

Aircrack- ng is a complete suite of tools to assess WiFi network security.

It focuses on different areas of WiFi security:

• Monitoring: Packet capture and export of data to text files for further processing by third party tools
• Attacking: Replay attacks, deauthentication, fake access points and others via packet injection
• Testing: Checking WiFi cards and driver capabilities (capture and injection)
• Cracking: WEP and WPA PSK (WPA 1 and 2)

All tools are command line which allows for heavy scripting. A lot of GUIs have taken advantage of this feature. It works primarily on Linux but also Windows, macOS, FreeBSD, OpenBSD, NetBSD, as well as Solaris and even eComStation 2.

Fresh news

We’re moving from our old trusty forum to GitHub Discussions partly due to the maintenance burden, which means new posts should be opened in the Discussions tab of our repository. The old forum will become a static archive so the links to the posts won’t become 404.

After more than 2 years, we are making a release with a decently large amount of fixes, improvements, and additions. We also broke the 4000 commits barrier, and this release has more than 400 commits.

Under the spotlights

Learn WiFi penetration testing with the author and lead developer of Aircrack-ng. WiFi Exploitation 101, covers topics ranging from WiFi basics to WPA Enterprise exploitation, and is available as a 1-day live online class, with 10 hands-on labs.

If you are having issues injecting or if you are receiving an error message talking about channel -1 or fixed channel in airodump-ng (top right of the screen) or aireplay-ng, kill the network managers using airmon-ng check kill before putting the wireless card in monitor mode.

Источник