Wifi bruteforce android termux

How to Hack Wifi Using Aircrack-ng in Termux Without Root?

A network software package called Aircrack-ng for 802.11 wireless LANs includes a detector, packet sniffer, WEP and WPA/WPA2-PSK cracker, and analysis software. It works with any wireless network interface controller whose driver can sniff 802.11a, 802.11b, and 802.11g traffic and provides raw monitoring mode. When cracking WEP and WPA/WPA2-PSK keys, Aircrack-ng employs a variety of methods. A versatile tool called Airbase-ng is intended to attack clients rather than the actual Access Point. Airdecloak-ng eliminates a packet capture file’s WEP cloaking. A wireless deactivation tool based on rules is called Airdrop-ng. The WEP protection standard is used by wireless networks, and Aircrack-ng is a great tool to utilize on those networks. The one issue is that WEP was declared obsolete in 2004. In Aircrack-ng, some routines operate on the WPA network, but that standard is no longer in use, and those utilities don’t work anyway.

Step 1: Activating the wireless interface in monitor mode. This step’s objective is to activate monitor mode on your card. Your card may listen to every packet in the air when in monitor mode. Depending on the driver you’re running, there are several steps to take to activate monitor mode. Run the following command to identify the driver (and the appropriate course of action to take.

Step 2: On a computer with wireless cards from Ralink, Atheros, and Broadcom installed, the OS replies:

Step 3: installing madwifi-ng to hack wifi

Step 4: Start collecting authentication handshake data with airodump-ng.

Step 5: To deauthenticate the wireless client, use airplay-ng.

Step 6: The wireless client is informed by this step that it is no longer connected to the AP. After that, ideally, the wireless client will reauthenticate with the AP. The reauthentication produces the 4-way authentication handshake that we are interested in obtaining. You identify a client currently connected based on the output of airodump-ng in the preceding step. For the upcoming, you require the MAC address. Open a new console window and type:

Step 7: To decode the pre-shared key, launch aircrack-ng.

Step 8: In which: W password. lst is the dictionary file’s name. If the file is not in the same directory, don’t forget to include the entire path. The name of the collection of files holding the collected packets is the cap. In this instance, you’ll see that we included many files by using the wildcard. When no handshakes are discovered, the following is the normal output:

Step 9: Aircrack-ng will now start attempting to crack the pre-shared key. This might take a while, possibly even days, depending on your CPU’s performance and the size of the dictionary.

The pre-shared key may be successfully cracked using the following method and Hack Wifi Using Aircrack-ng in Termux Without Root is now successful:

Note: This article is only for educational purposes.

Источник

Взлом WI-FI через Termux на Android

Друзья, всех приветствую! Сегодня я покажу вам как хакеры могут взламывать WI-FI сети используя собственный смартфон! Интересно? Тогда мы начинаем!

Замечу, что эта статья написана только для образовательных целей. Мы никого ни к чему не призываем, только в целях ознакомления!

Приступим:

2. Отключаем wifi поиск (полностью выключаем wifi , работаем через мобильный интернет)

3. Заходим в терминал termux и поочередно вводим следующие команды:

install -y wget

wget https://raw.githubusercontent.com/drygdryg/OneShot_Termux_installer/master/installer.sh

bash installer.sh

После должна пойти установка скрипта необходимого для работы (oneshot)

4. Вылезает табличка all down. oneshot.ру успешно

5. Далее те кто забыл выключить wifi вводят в терминале команду:

python oneshot.py -i wlan0 —iface-down -K

Terminal запросит root права после этой манипуляции, соответственно нужно дать разрешение.

6. Затем будет виден список wifi, обозначенные цветом, зелёные самые уязвимые, ну или по желанию попробовать разные, которые можно попробовать взломать по нумерации.. 1,2,3 enter.

7. Обновить список можно буквой r

8. Если операция не проходит и появляется ошибка, то перезагружаем termux и возвращаемся к разделу 6

ВАЖНЫЕ ССЫЛКИ:

Мой второй канал LOCKNET | Заработок денег — ТЫК

Обучающий канал LOCKNET | Обучение — ТЫК

Другие статьи на нашем с вами любимом канале LOCKNET | DEEPWEB! Подписывайся, делись ссылкой на статью с друзьями!

Источник

Wifite Termux – 🖲️ WiFi Hacking Tools for Termux

Hello Friends, Welcome all to our blog aktermux.in and today I am going to discuss about best WiFi Hacking Tools in Termux. Termux is a best apk to learn Ethical Hacking but sometimes we need some extra requirements for any tool.So, today we are going to learn WIFITE installation in Termux without rooting your Android device.

Introduction to Wifite Tool

Wifite is the most famous wifi hacking tool used to break wifi passwords within seconds. Wifite is a tool to audit WEP or WPA-encrypted wireless networks. It uses aircrack-ng, pyrite, reaver, tshark tools to perform the audit. Wifite automatically scans wireless networks for Hacking.

Requirements of Wifite Tool

• Approx 200 MB data
• Adapter ( Amazon Buy Now )
• Wifite Features
• Accurate
• Easy to use
• Automatically Find Passwords
• No Need any physical connection

Wifite Tool in Termux

Wifite is a tool works with root access. So we need to give root access to our Termux without rooting our mobile phone. Such that we need to install Ubuntu in Termux. I have already discussed about Ubuntu installation in Termux. Ubuntu required only 300MB data in installation and setup. You can also download Kali Nethunter in Termux.
I hope you have installed Ubuntu or Kali Nethunter. Now open Ubuntu terminal and follow these commands :-
$ apt-get update
$ apt-get upgrade
$ apt-get install git
$ apt install python 2
$ git clone https://github.com/derv82/wifite2
$ cd wifite2
$ python2 setup.py
$ apt install aircreak-ng
$ python2 Wifite.py -h
We have downloaded it successfully….

Wifite in Kali Nethunter

It is very simple to download Wifite Tool in Kali Nethunter. Open Kali Nethunter terminal and run $ sudo apt install wifite command.Now you have to enter sudo password ( default Kali )
After completing download simply run $ wifite and your tool will be run sucessfully.

Conclusion

In this article we have discussed about Wifite Tool in Termux. It is one of the best tool for WiFi Hacking. If you like our post please share it with your friends and if you have any issue in installation watch the video carefully.

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

You Can H@ck Wifi With Your Rooted Android Device.

Mahfuz-THBD/Wifi_Hack

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Hack WIfi Using Termux! (Requires Root)

$ apt update && apt upgrade $ pkg install -y root-repo $ pkg install -y git tsu python wpa-supplicant pixiewps iw $ git clone https://github.com/Mahfuz-THBD/Wifi_Hack $ cd Wifi_Hack $ chmod +x birihack.py $ sudo python birihack.py --help

Example : sudo python birihack.py -i wlan0 -K

First turn off your Wifi.

• Show avaliable networks and start Pixie Dust attack on a specified network.
• sudo python birihack.py -i wlan0 -K
• • Start Pixie Dust attack on a specified BSSID: sudo python birihack.py -i wlan0 -b 00:91:4C:C3:AC:28 -K

  «Device or resource busy (-16)» — Turn on Wifi and Then Turn off Wifi.

  About

  You Can H@ck Wifi With Your Rooted Android Device.

  Источник

  📡 Wifi Hacking Tools for Termux | Hack WiFi using Kali Linux

  

  Hacking wifi is not much easy as you think. But Today I will introduce you to a tool known as Wifi-hacking.py that helps us to Hack a Wifi easily using Termux. We can use it in Termux and Kali Linux both but it required root access in Termux. We can use Kali Nethunter in Termux.

  These are some of the amazing features offered by Wifi-Haacking.py

  • Start monitor mode
  • Stop monitor mode
  • Scan Networks
  • Getting Handshake
  • Create a wordlist
  • Install Wireless tools
  • WPS Networks attacks
  • Scan for WPS Networks
  • Crack Handshake with rockyou.txt
  • Crack Handshake with the wordlist
  • Crack Handshake without a wordlist

  Wifi Hacking Tool in Termux

  Termux is an android emulator that comes with some basic packages. Before installing Wifi-Hacking.py in Termux make sure you have a rooted device or use Kali Nethunter. If you have not Kali Nethunter then you can search for it on the website. Let’s move toward the installation.

  STEP-1: Update and Upgrade Termux Terminal.

  STEP-2: Install the required packages for the WiFi-Hacking.py tool.

  $ apt install git $ apt install python $ apt install python3 $ apt install cmatrix

  STEP-3: Clone Wifi-Hacking.py tool files from GitHub using the git clone command.

  $ git clone https://github.com/akashblackhat/wifi-hacking.py.git $ ls

  STEP-4: Now you need to open the wifi-hacking.py directory/folder using the cd command.

  STEP-5: Run the wifi-hacking.py tool using python3 and enjoy it.

  Wifi Hacking Tool in Kali Linux

  Here are some commands you have to follow to install the Wifi Hacking tool in Kali Linux.

  $ sudo apt-get update && apt-get install git $ git clone https://github.com/akashblackhat/wifi-hacking.py.git $ ls $ cd wifi-hacking.py $ ls $ sudo python3 wifi-hacking.py

  Search Network. Hack Wifi and Enjoy Free Internet. Wait Wait Wait Don’t Forget to Join Telegram. Wifi Hacking is illegal so do it at your own risk. All the information available on our website is for educational purposes.

  Источник