Wifi контроллер magic home

Wi-Fi контроллер предназначен для управления RGB-светодиодной лентой через приложение Magic Home Pro на смартфоне. Контроллер выполнен из пластикового корпуса, с одной стороны имеется коннектор 4-pin Father для подключения ленты, а с другой стороны разъем Power Jack 5,5 мм Mother для подачи питания 12В.

При подключении ленты к контроллеру необходимо убедится, что красная стрелка на контроллере совпадает с выпуклой стрелкой на коннекторе RGB-ленты.

Затем подаем питание к контроллеру через блок питания 12В.

Теперь при помощи сканера QR-кодов на смартфоне сканируем QR-код на корпусе Wi-Fi контроллера. Ссылка ведет на страницу сайта, где можно скачать APK-Файл для установки приложения Magic Home Pro.

Так же можно использовать приложение Google Play на Android-смартфоне для поиска и загрузки приложения Magic Home Pro.

После установки переходим в приложение, нажимаем на плюс в правом верхнем углу экрана. В появившемся меню выбираем «Добавить устройство».

Регистрируемся и авторизовываемся под своей учетной записью. Затем разрешаем приложению все необходимые доступы.

В окне подключения устройства выбираем контроллер. Название будет соответствовать «LEDnetXXXXXX«. Для подключения к контроллеру нажимаем кнопку «Подключить«.

В следующем окне выбираем домашнюю Wi-Fi сеть, к которой хотим подключить Wi-Fi контроллер и вводим от неё пароль.

После успешного добавления контроллера появится окно, в котором можно ввести название текущего контроллера. При запуске приложения Magic Home Pro в разделе «Устройства» будет отображаться Wi-Fi контроллер при клике на который появится меню для управления подсветкой ленты.

Источник

Magic Home

The Magic Home integration supports several brands of switches, bulbs, and controllers that use the same protocol. Chances are high that your bulb or controller (eg. WiFi LED CONTROLLER) will work with this integration if you can control the device with the Magic Home app or the Surp Life app.

This integration will provide local control over your LED lights/strips and can be configured to auto-scan your network for controllers or for you to manually configure individual lights by their IP address.

Examples of controllers with strips:

Examples of addressable controllers:

Examples of addressable controllers with strip:

These devices have been sold under at least the following brands:

Aislan
Allkeys
Apobob
Arilux
Aubric
BERENNIS
BHGY
Brizled
Bunpeon
Chichin
Comoyda
dalattin
DALS RGBW / Armacost Lighting / MyLED
DARKPROOF
Daybetter
deerdance
DIAMOND
Diode Dynamics
Flux LED
FVTLED
GEV LIG
GEYUEYA Home
GIDEALED
GIDERWEL
GMK
Goldwin
Hakkatronics
HaoDeng
Heissner
HDDFL
illume RGBW
Illumination FX
INDARUN
iNextStation
Koopower
Lallumer
LEDENET
LiteWRX
Lytworx
Magic Ambient
Magic Home
Magic Hue
Magic Light
Miheal
Mowelai
Nexlux
OBSESS
Offdarks
PH LED
PHOPOLLO
Pin Stadium Pinball Lights
POV Lamp
PROTEAM Europe Pool Lights
Rimikon
SMFX
Sumaote
Superhome
SurpLife
SuperlightingLED
Svipear
Tommox
Vanance
Yetaida
YHW
Zengge
Zombber

Configuration

Adding Magic Home to your Home Assistant instance can be done via the user interface, by using this My button:

Magic Home can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

Browse to your Home Assistant instance.
Go to Settings > Devices & Services.
In the bottom right corner, select the Add Integration button.
From the list, select Magic Home.
Follow the instructions on screen to complete the setup.

After the devices have been added they can be configured with different effects listed below. These settings can be accessed by navigating to the integration settings in Settings -> Integrations and selecting the “Magic Home” configuration for the bulb or controller.

Custom Effect
A list of RGB colors can be entered to create an effect. The effect speed can be adjusted using the slider underneath.

Custom Effect Type
This determines the transition between each color.

Supported Models

The following models have been tested.

Model	Description	Microphone	Notes
0x01	Legacy RGB Controller	no	Original protocol
0x03	Legacy CCT Controller	no	Original protocol
0x04	UFO Controller RGBW	no
0x06	Controller RGBW	no
0x07	Controller RGBCW	no
0x08	Controller RGB with MIC	yes
0x09	Ceiling Light CCT	no
0x0E	Floor Lamp RGBCW	no
0x10	Christmas Light	no
0x16	Magnetic Light CCT	no
0x17	Magnetic Light Dimmable	no
0x1A	Christmas Light	no
0x1C	Table Light CCT	no
0x1E	Ceiling Light RGBCW	no
0x21	Bulb Dimmable	no
0x25	Controller RGB/WW/CW	no	Supports RGB, RGBW, RGBWW, CW, DIM
0x33	Controller RGB	no
0x35	Bulb RGBCW	no
0x41	Controller Dimmable	no
0x44	Bulb RGBW	no
0x52	Bulb CCT	no
0x54	Downlight RGBW	no
0x62	Controller CCT	no
0x93	Switch 1 Channel	no
0x97	Socket	no
0xA1	Addressable v1	no	Supports UCS1903, SM16703, WS2811, WS2812B, SK6812, INK1003, WS2801, LB1914
0xA2	Addressable v2	yes	Supports UCS1903, SM16703, WS2811, WS2811B, SK6812, INK1003, WS2801, WS2815, APA102, TM1914, UCS2904B
0xA3	Addressable v3	yes	Supports WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, SK6812RGBW (WS2814), INK1003, UCS2904B
0xA4	Addressable v4	no	Supports WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, SK6812RGBW (WS2814), INK1003, UCS2904B
0xA6	Addressable v6	yes	Supports WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, SK6812RGBW (WS2814), INK1003, UCS2904B
0xA7	Addressable v7	yes	Supports WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, SK6812RGBW (WS2814), INK1003, UCS2904B
0xE1	Ceiling Light CCT	no
0xE2	Ceiling Light Assist	no	Auxiliary Switch not supported

Untested Models

The following models have not been tested but may work.

Model	Description	Microphone	Notes
0x02	Legacy Dimmable Controller	no	Original protocol, discontinued

Unsupported Models

The following models are confirmed to be unsupported.

Model	Description	Microphone
0x18	Plant Grow Light	no
0x19	Socket with 2 USB	no
0x1B	Aroma Fragrance Lamp	no
0x1D	Fill Light	no
0x94	Switch 1c Watt	no
0x95	Switch 2 Channel	no
0x96	Switch 4 Channel	no
0xD1	Digital Time Lamp	no

Troubleshooting

If a strip controller device will not stay on wifi or goes offline during adjusting colors and effects, upgrading to a power supply with a higher amperage usually resolves any stability issues.

Effects

The Magic Home light offers a number of effects which are not included in other lighting packages. These can be selected from the front-end, or sent in the effect field of the light.turn_on command.

Effect Name	Description
colorloop	Smoothly transitions through the rainbow.
colorjump	Jumps through seven different rainbow colors.
colorstrobe	Strobes each rainbow color in a loop.
red_fade , green_fade , blue_fade , yellow_fade , cyan_fade , purple_fade , white_fade	Fades between the color as indicated in the effect name and black.
rg_cross_fade	Fades between red and green.
rb_cross_fade	Fades between red and blue.
gb_cross_fade	Fades between green and blue.
red_strobe , green_strobe , blue_strobe , yellow_strobe , cyan_strobe , purple_strobe , white_strobe	Strobes the color indicated by the effect name.
random	Chooses a random color by selecting random values for R, G, and B.

Custom Effects — Service flux_led.set_custom_effect

The integration offers a custom service to enable you to set the lights to a custom light effect.

Service data attribute	Description
entity_id	The entity_id of the LED light to set the effect on.
colors	List of RGB colors to transition between in your effect. (Max 16, Required)
speed_pct	The speed of the effect in % (0-100. Default 50)
transition	The transition effect you would like. Valid options are gradual , jump , or strobe . (Default gradual )

#Example Service Call entity_id: light.led_strip colors: - [255,0,0] - [0,255,0] - [0,0,255] speed_pct: 80 transition: "jump"

Set Zones — Service flux_led.set_zones

The Addressable v3 (0xA3) models allow setting a color effect per zone. The length of each zone is the number of pixels per segment divided by the number of colors. If the device is turned off, setting the zones will not turn it on. A separate call to light.turn_on is needed to turn on the device.

Service data attribute	Description
entity_id	The entity_id of the LED light to set the effect on.
colors	List of colors for each zone (RGB). (Max 2048 Colors)
speed_pct	The speed of the effect in % (0-100. Default 50)
effect	The effect you would like. Valid options are static , running_water , strobe , jump , or breathing . (Default static )

#Example Service Call service: flux_led.set_zones target: entity_id: - light.addressable_v3_8e2f7f - light.addressable_v3_8ebdeb data: colors: - [255, 0, 0] - [0, 255, 0] - [0, 0, 255] - [255, 255, 255] speed_pct: 80

Set Music Mode — Service flux_led.set_music_mode

The RGB with MIC (0x08), Addressable v2 (0xA2), and Addressable v3 (0xA3) models have a built-in microphone that have multiple music mode settings.

Service data attribute	Description
entity_id	The entity_id of the LED light to set the effect on.
sensitivity	Microphone sensitivity (0-100)
brightness	Light brightness (0-100)
light_screen	Light screen mode for 2 dimensional pixels (Addressable models only)
effect	Effect (1-16 on Addressable models, 0-3 on RGB with MIC models)
foreground_color	The foreground RGB color
background_color	The background RGB color (Addressable models only)

#Example Service Call service: flux_led.set_music_mode target: entity_id: - light.addressable_v3_8e2f7f - light.addressable_v3_8ebdeb data: sensitivity: 100 brightness: 100 effect: 2 light_screen: false background_color: [0, 255, 0] foreground_color: [255, 0, 0]

Help us to improve our documentation

The Magic Home integration was introduced in Home Assistant 0.25, and it’s used by 2.6% of the active installations. Its IoT class is Local Push and it scores platinum on our quality scale.

Wifi контроллер magic home