Are all sky boxes wifi

Sky box WiFi help

Sky
I’m wondering how I connect my sky box to my WiFi.
I’ve a sky hd plus box
However my WiFi modem is in a different room is it possible to connect them if so how.

coolhandluke

Registered User

Use a lan cable, keep the wifi for the mobiles/tablets/laptops. hardwire any tv’s, Pc’s, media boxes.

Monbretia

Registered User

Mine is connected with the wifi, is there some reason why it’s better to use a cable? I’m just curious

SparkRite

Registered User

If streaming, WiFi is by far the most unreliable method to use.

If a Lan lead is not an option then ‘Home Plugs’ or similar is a good fallback option.

jpd

Registered User

Monbretia

Registered User

Ok, as I don’t even know what ‘streaming’ is it’s safe to say I haven’t noticed anything

I know my old Sky box did not have wifi option but the new installed about 6 months ago did so they connected it up.

gipimann

Registered User

For sky boxes that don’t have built-in wifi capability, Sky can provide a connector which allows the box to connect to wifi.

Sky Accessories

They have offered these for free in the past (especially if you’re going to use catch up TV or watch box sets), so might be worth a call to Sky to ask. I got a free connector some years ago, and it worked fine for downloading content from Sky to the box for later viewing.

Источник

How to Connect Sky Box to Wi-Fi Without WPS Button? (Quick Setup Guide)

The Wi-Fi Protected System ( WPS ) is a way of establishing a fast connection between the router and broadband modem . Skyboxes have this feature, and it is relatively easy to set up and use with other Wi-Fi-capable devices.

However, not all Skybox models have the feature, as some are outdated. Some users might also prefer alternative connection methods that do not involve pressing the WPS button.

Have no worries, as we will look at the alternative methods to establish a connection between your Sky box and a Wi-Fi router.

What is WPS?

The Wi-Fi Protected System (WPS) is a technology for making wireless connections without using a password. It allows the router to automatically share the security key with various Wi-Fi-enabled devices on the condition that they are close.

Notably, WPS handles sending of information between two devices sharing a connection. It does not manage the connection.

The WPS button is found on all Sky boxes that have inbuilt Wi-Fi. The button is used to connect the Sky box to the router, other WPS devices, or Sky Wi-Fi booster.

• Press the WPS button on your router for 2 seconds to use it.

• Then press the WPS button on your Sky box within a minute. The devices should connect automatically.

If the connection is successful, the Skybox LED will light in a solid amber color.

First Things First!

Before you embark on establishing a connection, it is prudent that you check your firmware version. The purpose of this is to see if you are eligible for a free equipment upgrade from Sky.

Press Service on the Sky remote to check your software version, then go to settings . Once there, select system details and, if your software version starts with 4E30, contact customer support for an upgrade at no cost.

How to Connect Without the WPS Button

There are various ways to connect the Sky box to Wi-Fi without using the WPS button. They depend on whether your Sky box has the WPS button or not.

You can connect your Sky box to Wi-Fi by entering the Wi-Fi password after following the steps below.

• Press Services then 0 , then five on your remote, and it will take you to the Network tab. Alternatively, press Services on the Sky remote then Settings>Network.

• Under network, there are three options for connecting your Sky box to the Sky internet , select Connect with Password .

• After you select this option, your Skybox will search for all the wireless networks available around you. Find your network name and Select .

• Next, a prompt will require you to enter your Wi-Fi password . If you do not know your password, you can find it on the label on your router together with your Wi-Fi name.

Also, remember that Wi-Fi passwords are case sensitive; therefore, carefully enter yours.

• A notification will appear on the screen if the connection is successful. Press the red button on the remote and select catch up to enjoy the Sky services.

• Using the Wireless Connector

If your Sky box doesn’t have Wi-Fi capabilities, and you still wish to use WPS to set up a connection, there is a way. However, it will require you to dig a little deeper into your pockets.

The other option is to purchase a Sky wireless connector box. It is a companion device that enables Sky boxes without inbuilt Wi-Fi to access the internet.

The connector box can connect to Wi-Fi with or without using its WPS button. You can use the WPS connection if your router has a WPS button.

• Plug one end of the Ethernet cable into the Skybox and the other end into the connector box. Both ports are green.

• Then plug the power cable into the blue port of the wireless connector and the other end into a power socket.

• For the SD501 model, connect the bigger end of the USB cable into the Skybox and the smaller end into the wireless connector box.

• Turn on your TV, and you will see a message notifying you of a broadband connection detection.

• Wait for approximately two minutes, and you will see a list of the available wireless networks.

• Select your network and enter the password using your remote keys.

• After, a notification screen will appear with your connection details. Hit the backup button, and you are ready to go.

When using a wireless connector, place it close to your Sky box and ensure it is off the floor. You can put it on the Skybox or beside it as long as there are no obstructions between it and the Skybox.

It is important to note that the SC201 box model requires a power adapter and an ethernet cable to work. The SD501model , on the other hand, uses a USB cable as a power and data sharing cable.

It is also worth noting that Sky no longer produces the wireless connector units. Therefore, if you want to purchase them, you will have to settle for second-hand ones.

Alternatively, if both your Sky box and router support WPS, you can use it without necessarily touching the WPS buttons on either device.

To connect using the WPS PIN on your Sky remote press Services.

Then go to settings>network , choose to connect with WPS PIN , and follow the prompts on your screen.

Some routers do not necessarily have a WPS button but have the WPS functionality. To access it visit the routers administration page via your router’s IP address. The most common ones are 192.168.0.1 and 192.168.1.1 .

The WPS settings are most likely under Advanced Settings . If you cannot spot the settings, they might be under the names; Quick Secure Setup (QSS), Push ‘n’ Connect, or Wi-Fi Simple Config.

Using the WPS PIN method is less secure as it is easy to use a brute force attack to gain access to your connection.

VIDEO TUTORIAL – Ways to Connect Your Sky Box to Wi-Fi

Points to Note

There is a difference between a Sky box or a Sky+ HD box and a Sky Q box . Among the differences is that the Sky Q is slimmer and smaller with a WPS button.

Sky HD boxes are the predecessors of Sky Q boxes; therefore, you should consider upgrading to the newer Sky Q version. An upgrade would ensure you have up-to-date features with all security loopholes patched.

Recommended reading:

Albeit the WPS push button method is easier and faster to use, it has a few disadvantages. Among them are that it is not very secure, and anyone with physical access to your router can gain access to your connection.

Also, should the methods above not help, you can use an Ethernet connection. It is the most reliable and fastest way of connecting Sky and other wireless devices to your router.

Final Thoughts

Hopefully, the above information is a beacon for understanding the confusing world of WPS connections and Sky boxes. As you connect your devices using alternative methods, ensure that every other cable connection is made correctly. All you have to do now is bear the burden of choosing safety over convenience when using the Wi-Fi-protected setup .

Hey, I’m Jeremy Clifford. I hold a bachelor’s degree in information systems, and I’m a certified network specialist. I worked for several internet providers in LA, San Francisco, Sacramento, and Seattle over the past 21 years.

I worked as a customer service operator, field technician, network engineer, and network specialist. During my career in networking, I’ve come across numerous modems, gateways, routers, and other networking hardware. I’ve installed network equipment, fixed it, designed and administrated networks, etc.

Networking is my passion, and I’m eager to share everything I know with you. On this website, you can read my modem and router reviews, as well as various how-to guides designed to help you solve your network problems. I want to liberate you from the fear that most users feel when they have to deal with modem and router settings.

My favorite free-time activities are gaming, movie-watching, and cooking. I also enjoy fishing, although I’m not good at it. What I’m good at is annoying David when we are fishing together. Apparently, you’re not supposed to talk or laugh while fishing – it scares the fishes.

Источник

All new Sky boxes will now come with Wi-Fi on board

Sky has rolled out its Wi-Fi-enabled set top boxes as standard to new customers, and is offering existing customers who have not yet used on-demand a free Wi-Fi dongle for their boxes.

The on-demand service has been hamstrung previously by the need for an ethernet link between the modem/hub and the Sky box — not all that handy for those whose two boxes are in different parts of their house.

Mindful of that Sky is now ensuring that all new boxes have built in Wi-Fi as standard in new Sky+HD and Sky+HD 2TB boxes.

Dongle

Interestingly, for those people who have not yet used on-demand but are not going to update their boxes, there is the option of applying for a free dongle.

Not, however, if you have already used on demand or if you do not have a box that is capable of using the dongle. Which is a bit of a shame for those who are looking to do away with all those cables under the TV.

You can check if you are eligible at sky.com/connector.

Sky’s popular on demand service is currently going through a bit of a growth spurt, and there’s the promise of more TV boxsets of things like Hannibal Season 1, Friday Night Lights Seasons 1 and 2 and Falling Skies’ first two series from September.

TechRadar Newsletter

Sign up to receive daily breaking news, reviews, opinion, analysis, deals and more from the world of tech.

By submitting your information you agree to the Terms & Conditions and Privacy Policy and are aged 16 or over.

Patrick Goss is the ex-Editor in Chief of TechRadar. Patrick was a passionate and experienced journalist, and he has been lucky enough to work on some of the finest online properties on the planet, building audiences everywhere and establishing himself at the forefront of digital content. After a long stint as the boss at TechRadar, Patrick has now moved on to a role with Apple, where he is the Managing Editor for the App Store in the UK.

Источник