Local area network with wifi

Wireless Local Area Network

A wireless local area network is a local area network where the computers are interconnected to each other using the high-frequency radio wave instead of wires and cables. The wireless local area network provides mobility to the end nodes.

In this section, we will discuss wireless local area networks in brief, along with this we will also study the techniques which can be used to implement wireless LAN, we will also discuss their architectures of wireless LAN. Further, we will study the advantages and disadvantages of wireless LAN over wired LAN.

Content: Wireless Local Area Network

Introduction

The wired LANs make use of standard wires and cables to connect the end nodes of the network. The wireless local area network does not use wire or cable to establish connectivity between the nodes instead high-frequency radio waves are used to connect the devices in the network.

Just as we use Ethernet as a communication standard for wired LAN, IEEE has introduced four communication standards for wireless LANs that are 802.11, 802.11a, 802.11b, and 802.11g.

In the section ahead, we will discuss two techniques that we use to implement the wireless LAN that are IEEE standard 802.11 and Bluetooth. We will also discuss the architecture of both techniques. So let us start with IEEE 802.11.

IEEE 802.11 Wireless Local Area Network

IEEE 802.11 is a communication standard for wireless LAN, it defines two layers i.e., physical layer and data link layer which are the first two layers of the OSI model. Let us discuss the architecture of wireless LAN.

Architecture of IEEE 802.11

The implementation of IEEE 802.11 wireless LAN can be classified into two types basic service set (BSS) and extended service set (ESS).

1. Basic Service Set

The basic service set is the basic structure of every wireless LAN. The main components of BSS are stations which can be stationary or mobile stations and the access point which is a central base station. The access point is optional in BSS.

Читайте также:  Wi fi ресивер звука

The basic service stations can be further implemented in two ways:

a. Adhoc Network

The basic service set which does not have an access point is referred to as an ad hoc network. The stations in the Adhoc network can’t send data to the stations on other BSSs. This kind of network is a stand-alone network.

BSS Adhoc Network (Wireless Local Area Network)

As in the ad hoc network, there is no access point so to create a network the stations identify and locate themselves to one another.

For example, your mobile phone creates a spontaneous network .when it sends data to another mobile phone.

b. Infrastructure Network

The infrastructure network has a central base station i.e., access point. All the stations in this network are connected to the access point and can communicate through the access point.

BSS Infrastructure Network (Wireless Local Area Network)

For example, your home or office Wi-Fi network.

2. Extended Service Set

The extended service set is a set of two or more BSSs where each BSS compulsorily has an access point. Here all the BSSs are connected to each other using the wired LAN which connects the access point of all BSSs.

In an extended service set, there are both stationary stations as well as mobile stations in the network. The stationary stations are the access points that are connected using wired LAN and mobile stations are stations inside every BSSs.

Extended Service Set ESS

Now the stations in BSS that are within the reach of one another do not require access points to communicate with one another but the stations that are far away from one another can communicate with each other through the connected access points.

Discussing all this let’s see how many types the stations can be:

Station Types

  1. No-transition stations are the stations that can either be stationary stations that can not move from their places or stations that can move within the BSS only.
  2. BSS-transition stations are the stations that can move from one BSS to another BSS but both the BSS must be inside one ESS.
  3. ESS-transition stations are the stations that can move from one ESS to another ESS.
Читайте также:  Подсоединить телефон через wifi

Versions of IEEE 802.11

  • IEEE 802.11a: This standard operates at the frequency of 5GHz and is able to transfer the data at the speed of 54 Mbps.
  • IEEE 802.11b: This standard is slower than 802.11a as it transfers data at the speed of 11 Mbps and it operates at the frequency of 2.4 GHz. As its operating frequency is low it is better in penetrating the physical barriers.
  • IEEE 802.11g: This standard operates at the frequency of 2.4 GHz and transfers data at 54 Mbps.
  • IEEE 802.11n: This is the recently revised standard introduced by IEEE which can operate at the frequency of 2.4 GHz to 5 GHz and is able to transfer the data at a speed of 600 Mbps.

Bluetooth Wireless Local Area Network

Bluetooth is another technique to implement wireless LAN but of a very short range. This technique connects the devices that have different functional capabilities such as mobile phones, cameras, printers, speakers, and so on.

Bluetooth is an ad hoc kind of network that can be made spontaneously where the devices/gadgets/end nodes locate each other, agree to make a network, and create a network. If one of the devices in the network has the capability to connect with the internet then Bluetooth LAN can be connected to the internet.

By creating a Bluetooth LAN, you can connect a wireless mouse to your computer, you can connect your mobile phone to the speakers, you can even connect two mobile phones, and so on.

The Bluetooth LAN can be classified into two types of network:

Piconet is a small range network that has eight active stations. Among these eight stations, only one station is the primary station, and the rest stations are secondary stations.

Piconet Bluetooth

The communication in a piconet is always one-to-one or one-to-many. During the data transfer, the secondary station in the piconet needs to synchronize its hopping sequence and its clock with respect to the hopping sequence and clock of the primary station.

Читайте также:  No wifi connections found

Scatternet is a combined net created using several piconets. Here a secondary station of a piconet serves as the primary station for the other piconets.

Scatternet Bluetooth

The data flow like this, from the primary station of piconet 1 to the secondary station of piconet1. Here this secondary station of piconet 1 acts as a primary station to piconet 2 which will transfer the data to secondary stations of piconet 2. In this way, a single station can be a part of two piconets.

The Bluetooth network operates at the frequency of 2.4 GHz and can transfer the data at the speed of 1 Mbps.

Interference

The wireless networks are reliable and convenient but it has the possibility of interference. When two devices try to operate on the same frequency interference occurs which not only degrades the quality of the signal but also reduces the range of the device.

The other reason for interference to radio waves are the metallic substances that have the ability to reflect the radio signals. Even materials with high density are harder to penetrate.

Advantages and Disadvantages

  1. The wireless LAN is a good alternative where the wired LAN can’t be implemented such as the areas that have geographical limitations like hilly areas.
  2. The addition and removal of new devices in the network are easier as compared to wired LAN.
  3. The network can be created spontaneously.
  4. The cost of installation and maintenance of wireless LAN is comparatively low as compared to wired LAN.
  5. The wireless network connects a wide variety of devices which has different functional capabilities.

Disadvantages

  1. The wireless LAN is prone to interference.
  2. The wireless LAN transfers data much slower when compared to wired LAN.
  3. Wireless communication requires more security.

So, this is the wireless local area network that provides mobility to its end users but restricts the range of devices. We have seen two technologies that can be used to implement wireless LAN that IEEE standard 802.11 and Bluetooth technology. Among these two, the IEEE standard 802.11 provides a higher data transmission rate.

Источник

Оцените статью
Adblock
detector