Turn off wifi on laptop

6 Ways to Turn Wi-Fi ON or OFF in Windows 11 PC

Most of the laptops nowadays have built-in wi-fi network adapter in them which helps users access the internet signal via wi-fi router that is connected to the internet. It is always recommended to turn the wi-fi off when not in use to enhance the performance of wi-fi on your laptop. Sometimes if your internet speed gets low, then as a part of troubleshoot you usually restart your modem router once. Along with restarting router, it is also better to turn on / off the wi-fi on your system. In this article we are going to show you how to turn your Wi-Fi ON / OFF on your windows 11 system in many ways.

Method 1: From Action Center

Step 1: Open Action Center

Press Win + A keys together on your keyboard.

Step 2: In the Action Center

Click on Wi-fi icon on the top left corner as shown below.

This turns on / off the wi-fi when you click on it.

Method 2: Enable / Disable Wi-Fi from Control Panel

Step 1: Open Control Panel

Press Win key on your keyboard and type control panel.

Hit Enter key.

Step 2: In the Control Panel window

Navigate to Network and Internet > Network and Sharing Center.

Then, Click on Change adapter settings as shown below.

Step 3: To Disable Wi-Fi

Right Click on Wi-Fi and Click Disable from the menu.

Step 4: To Enable Wi-fi

Right-Click on Wi-fi and select Enable from the list.

This way you can enable / disable the Wi-Fi on your laptop.

Method 3: Enable / Disable Wi-Fi from Device Manager

Step 1: Open Device Manager

Press Win + X keys together on your keyboard.

Click Device Manager from the list.

Step 2: In Device Manager window

To Enable Wi-Fi, Go to Network adapters and Right Click on Network adapter that has been installed on your laptop.

Select Enable device from the context menu as shown below.

To Disable the Wi-Fi, Go to Network adapters and Right Click on Network adapter that has been installed on your laptop.

Select Disable device from the context menu as shown below.

By this method, you can enable / disable the Wi-Fi on your system.

Method 4: Enable / Disable Wi-Fi using PowerShell application

Step 1: Open PowerShell application

Press Win key on your keyboard and type powershell.

Right Click on the PowerShell application from the search results.

Then, Click Run as administrator from the context menu.

Step 2: In the PowerShell window

Type netsh interface show interface and hit Enter key to see all the network cards installed on your system.

Type netsh interface set interface Wi-Fi enable and hit Enter key.

Type netsh interface set interface Wi-Fi disable and hit Enter key.

This way you can enable / disable the Wi-fi on your system.

Method 5: From Settings app

Step 1: Open Settings app

Press Win + I keys together on your keyboard.

Hit Enter key.

Step 2: In the Settings app

Go to Network & internet and Click on Wi-Fi toggle button to turn it on / off as shown below.

This method turns Wi-Fi on / off on your laptop.

Method 6: From Advanced network settings

Step 1: Open Advanced network settings

Press Win + I keys together on your keyboard.

Then, Click on Network & internet > Advanced network settings as shown below.

Step 2: In the Advanced network settings window

To enable Wi-Fi, Click on Enable button as shown below.

To disable Wi-Fi, Click on Disable button as shown below.

This allows you to enable / disable wi-fi on your windows 11 system.

Hope this article was informative and let us know which method you liked by leaving comments below.

Thank you for reading this article.

Read More:

Источник

How to enable and disable Wi-Fi

Laptops today all have Wi-Fi (wireless Internet) built-in, allowing people to connect to the Internet from almost anywhere. For security, compatibility, or other reasons, you may want to enable and disable the Wi-Fi on your laptop. To do so, make a selection from the list below and follow the steps.

After enabling Wi-Fi on your computer, you need to connect to a Wi-Fi network to access the Internet. See: How to connect to a Wi-Fi network.

If your Wi-Fi is not working or the suggested buttons do not work, for troubleshooting steps, see: Why is my Wi-Fi not working?

How to enable Wi-Fi on a laptop

Wi-Fi can be enabled by performing any of the steps below.

Enable with laptop Wi-Fi button

Some laptops have an On/Off button or switch for the Wi-Fi connection, as shown in the picture. It is usually found on the laptop’s front edge or above the keyboard. Find the button or switch, and make sure it’s enabled. When enabled, the button should be illuminated as blue, or the switch should be in the On position.

Enable with laptop Fn and function key

Some laptops enable and disable Wi-Fi using the Fn key and one of the function keys (F1-F12). As seen in the picture, some laptops use the Fn and F12 keys to enable and disable Wi-Fi. The F12 key also has an orange LED when disabled and blue when enabled, shown in the picture.

Enable Wi-Fi in Windows

Look in the Windows notification area to find the Wi-Fi or wireless Internet icon. Right-click with your mouse on the icon and select the option for enabling (or turning off) the Wi-Fi device in the pop-up menu. If no Enable option is available in the pop-up menu, there may be an option called Open Network and Sharing Center. If so, select this option and then select Change adapter settings. Once the wireless network card icon is seen, right-click it and select Enable.

In Windows 8, when you right-click the Wi-Fi icon, check if Airplane Mode is turned on. Turn it off to enable the wireless network card if it’s turned on.

The Wi-Fi adapter can also be enabled in the Control Panel. Click the Network and Sharing Center option, then click the Change adapter settings link in the left navigation pane. Right-click the Wi-Fi adapter and select Enable.

Enable Wi-Fi in Windows Device Manager

Access the Device Manager by right-clicking with your mouse on the My Computer icon on your desktop or in the Windows Start menu. Select Properties from the pop-up menu, click the Hardware tab in the window that opens up and click the Device Manager button.

In Windows Vista, and later, there is no Hardware tab. Click the Device Manager link in the System window.

Find the Wi-Fi adapter in the list of hardware devices. Right-click the adapter name and select Enable from the pop-up menu. If no Wi-Fi adapter is found in Device Manager, the Wi-Fi adapter drivers are not installed.

Enable Wi-Fi in BIOS setup

Finally, there is also the option of enabling the Wi-Fi device in the computer’s BIOS setup. However, it is very unlikely the Wi-Fi device would be disabled in BIOS.

How to disable Wi-Fi on a laptop

Wi-Fi can be disabled by performing any of the steps below.

Disable with laptop Wi-Fi button

Some laptops have an On/Off button or switch for the Wi-Fi device, like the button shown in the picture. It is usually found on the front of the laptop or above the keyboard. Find the button or switch and make sure it is disabled. When disabled, the button should not be illuminated or illuminated as orange or red, or the switch should be in the Off position.

Disable with laptop Fn and function key

Some laptops enable and disable Wi-Fi using the Fn key and one of the function keys (F1-F12). Some laptops use Fn and F12 keys to enable and disable Wi-Fi and show an orange LED when disabled and blue when enabled.

Disable in Windows

Right-click the Wi-Fi icon in the Windows notification area and select Disable (or Turn off) from the pop-up menu. If no Disable option is available in the pop-up menu, there may be an option called Open Network and Sharing Center. If so, select this option and then select Change adapter settings. Once the wireless network card icon is seen, right-click it and select Disable.

In Windows 8, when you right-click the Wi-Fi icon, you can turn off Wi-Fi by turning on Airplane Mode.

The Wi-Fi adapter may also be disabled from the Control Panel. Click the Network and Sharing Center option, then click Change adapter settings in the left navigation pane. Right-click the Wi-Fi adapter and select Disable.

Disable in Windows Device Manager

Access the Device Manager by right-clicking with your mouse on the My Computer icon on your desktop or in the Windows Start menu. Select Properties from the pop-up menu, click the Hardware tab in the window that opens up and click the Device Manager button.

In Windows Vista, and later, there is no Hardware tab. Click the Device Manager link in the System window.

Find the Wi-Fi adapter in the list of hardware devices. Right-click the adapter name and select Disable from the pop-up menu. If no Wi-Fi adapter is found in Device Manager, the Wi-Fi adapter drivers are not installed.

Disable in BIOS setup

As is the case with enabling the Wi-Fi device, it can also be disabled in the computer’s BIOS setup.

Wi-Fi on desktop computers

Wi-Fi adapters are also available for desktop computers. The Wi-Fi button mentioned above is not available with most desktop computers. However, there is the possibility that the Wi-Fi adapter itself (e.g., an external version, like a USB Wi-Fi adapter) has an On/Off button or switch. If there is no button or switch, disconnecting the adapter from the computer disables the device.

If the Wi-Fi adapter is not an external device, it is either an internal PCI expansion card or built onto the motherboard. When you install the software for the Wi-Fi adapter, an icon shows in the Windows notification area, giving you access to enable and disable the device. Alternatively, you can enable and disable the Wi-Fi adapter through the Device Manager or the BIOS.

Wi-Fi on Android smartphones and tablets

There are many variants of Android-based smartphones and tablets. These steps are for a device with the stock Android operating system. You may have to adjust the instructions based on the brand of phone or tablet you have.

1. On the home screen, place your finger near the top of the screen and swipe downward.
2. Once a menu similar to the one below is seen, look for the Wi-Fi symbol.

Wi-Fi on Apple iPhone and iPad

Follow the steps below to enable or disable Wi-Fi on an iPhone or iPad.

1. Open the Settings utility on the iPhone or iPad.
2. On the Settings screen, tap the Wi-Fi option.
3. On the Wi-Fi screen, for the Wi-Fi entry, tap the toggle switch. Wi-Fi is enabled when the toggle switch is green and disabled when the toggle switch is white, as shown below.

Related information

Источник