What is Wi-Fi?
We all know about Wi-Fi, in our mobile, laptop everywhere Wi-Fi is supported. Wi-Fi is a wireless networking technology, by which we can access networks or connect with other computers or mobile using a wireless medium. In Wi-Fi, data are transferred over radio frequencies in a circular range.
Wi-Fi, a brand name given by the Wi-Fi Alliance (formerly Wireless Ethernet Compatibility Alliance), is a generic term that refers to the communication standard for the wireless network which works as a Local Area Network to operate without using the cable and any types of wiring. It is known as WLAN. The communication standard is IEEE 802.11. Wi-Fi works using Physical Data Link Layer.
Nowadays in all mobile computing devices such as laptops, mobile phones, also digital cameras, smart TVs has the support of Wi-Fi. The Wi-Fi connection is established from the access point or base station to the client connection or any client-to-client connection within a specific range, the range depends on the router which provides the radio frequency through Wi-Fi. These frequencies operate on 2 types of bandwidth at present, 2.4 GHz and 5 GHz.
All the modern laptops and mobiles are capable of using both bandwidths, it depends on the Wi-Fi adapter which is inside the device to catch the Wi-Fi signal. 2.4 GHz is the default bandwidth supported by all the devices. 2.4 GHz can cover a big range of areas to spread the Wi-Fi signal but the frequency is low, so in simple words, the speed of the internet is less and 5 GHz bandwidth is for a lower range of area but the frequency is high so the speed is very high.
Let’s say, if there is an internet connection of 60 MB/s bandwidth, then for 2.4 GHz bandwidth, it provides approx 30 to 45 MB/s of bandwidth connection and for 5 GHz bandwidth, it provides approx 50 to 57 MB/s bandwidth.
History:
The concept of Wi-Fi is very old but its implementation is not so old. At first ALOHA System is a wireless network system that is used to connect Hawaii island via a network in the year 1971. Where the protocol is used for this was ALOHA protocol and the network used packet transfer. Later it’s converted to IEEE 802.11 protocol.
Then in 1985, the Federal Communications Commission (FCC) released a new network for general uses which works on 900 Mhz, 2.4 GHz, and 5.8 GHz bandwidth. This is known as the ISM band. Also, IBM introduced a Token Ring LAN network for connecting several computers, it can transfer data at 4 Mb/s speed. Then in 1988, a wireless cashier system was invented based on the Token Ring LAN network known as waveLAN, it operates at 900MHz or 2.4 GHz band and offers speeds of 1 to 2 Mbps. Then it was converted to IEEE 802.11LAN/MAN standards in 1989. ?Then in 1990, IEEE 802.11 Working Group for Wireless LANs is established by Vic Hayes, who was known as the “Father of WiFi”.
Then in 1994, Dr. Alex Hills introduced a research project on the wireless network, which provided coverage of the network to 7 buildings wirelessly.
Then in 1996 Commonwealth Scientific and Industrial Research Organization (CSIRO) introduced a wireless network based on the same protocol 802.11, later it was known as IEEE 802.11a standards.
Then after all this in 1997 the first version of Wi-Fi is released officially which is 802.11 and it can support a maximum of 2 Mb/s link speed. Then in 1999, the link speed is increased to 11 Mb/s over the 2.4 GHz frequency band, this version is known as 802.11b
Then after a month, the IEEE 802.11a standard is approved officially, which provides up to 54 Mb/s link speed over the 5 GHz band, but the signal range is weaker than the 2.4 GHz band.
Then in 2003, the speed is increased in a new version, known as 802.11g. The speed offers up to 54 to 108 Mb/s over 2.4 GHz.
After this two more versions were introduced that are, 802.11i and 802.11e. In 802.11i, the security mechanism was increased and in 802.11e, Voice over Wireless LAN and multimedia streaming are involved.
Then in 2009, 802.11n is developed, which supports both 2.4 GHz and 5 GHz radiofrequency. And these are used simultaneously by dual-band routers and can reach maximum speeds of 600 Mbps.
Then in 2014, a new version was introduced that offers a potential speed of 1733 Mb/s in the 5 GHz band. This version is known as 802.11ac. Till now this is the latest version of Wi-Fi.
Applications of Wi-Fi :
Wi-Fi has many applications, it is used in all the sectors where a computer or any digital media is used, also for entertaining Wi-Fi is used. Some of the applications are mentioned below –
- Accessing Internet: Using Wi-Fi we can access the internet in any Wi-Fi-capable device wirelessly.
- We can stream or cast audio or video wirelessly on any device using Wi-Fi for our entertainment.
- We can share files, data, etc between two or more computers or mobile phones using Wi-Fi, and the speed of the data transfer rate is also very high. Also, we can print any document using a Wi-Fi printer, this is very much used nowadays.
- We can use Wi-Fi as HOTSPOTS also, it points Wireless Internet access for a particular range of area. Using Hotspot the owner of the main network connection can offer temporary network access to Wi-Fi-capable devices so that the users can use the network without knowing anything about the main network connection. Wi-Fi adapters are mainly spreading radio signals using the owner network connection to provide a hotspot.
- Using Wi-Fi or WLAN we can construct simple wireless connections from one point to another, known as Point to point networks. This can be useful to connect two locations that are difficult to reach by wire, such as two buildings of corporate business.
- One more important application is VoWi-Fi, which is known as voice-over Wi-Fi. Some years ago telecom companies are introduced VoLTE (Voice over Long-Term Evolution ). Nowadays they are introduced to VoWi-Fi, by which we can call anyone by using our home Wi-Fi network, only one thing is that the mobile needs to connect with the Wi-Fi. Then the voice is transferred using the Wi-Fi network instead of using the mobile SIM network, so the call quality is very good. Many mobile phones are already getting the support of VoWi-Fi.
- Wi-Fi in offices: In an office, all the computers are interconnected using Wi-Fi. For Wi-Fi, there are no wiring complexities. Also, the speed of the network is good. For Wi-Fi, a project can be presented to all the members at a time in the form of an excel sheet, ppt, etc. For Wi-Fi, there is no network loss as in cable due to cable break.
- Also using W-Fi a whole city can provide network connectivity by deploying routers at a specific area to access the internet. Already schools, colleges, and universities are providing networks using Wi-Fi because of its flexibility.
- Wi-Fi is used as a positioning system also, by which we can detect the positions of Wi-Fi hotspots to identify a device location.
Types of Wi-Fi:
Wi-Fi has several types of standards, which are discussed earlier, here just the name of the standards are defined,
| Standards | Year of Release | Description |
|---|---|---|
| Wi-Fi-1 (802.11b) | 1999 | This version has a link speed from 2Mb/s to 11 Mb/s over a 2.4 GHz frequency band |
| Wi-Fi-2 (802.11a) | 1999 | After a month of release previous version, 802.11a was released and it provide up to 54 Mb/s link speed over 5 Ghz band |
| Wi-Fi-3 (802.11g) | 2003 | In this version the speed was increased up to 54 to 108 Mb/s over 2.4 GHz |
| 802.11i | 2004 | This is the same as 802.11g but only the security mechanism was increased in this version |
| 802.11e | 2004 | This is also the same as 802.11g, only Voice over Wireless LAN and multimedia streaming are involved |
| Wi-Fi-4 (802.11n) | 2009 | This version supports both 2.4 GHz and 5 GHz radio frequency and it offers up to 72 to 600 Mb/s speed |
| Wi-Fi-5 (802.11ac) | 2014 | It supports a speed of 1733 Mb/s in the 5 GHz band |
A new version will release in 2020 named 802.11ax developed by Huawei, which can support, a maximum of 3.5 Gb/s. it will know Wi-Fi 6.
How does Wi-Fi work?
Wi-Fi is a wireless technology for networking, so it uses Electromagnetic waves to transmit networks. We know that there are many divisions of Electromagnetic waves according to their frequency such as X-ray, Gamma-ray, radio wave, microwave, etc, in Wi-Fi, the radio frequency is used. For transmitting Wi-Fi signal there is three medium,
- Base station network or an Ethernet(802.3) connection: It is the main host network from where the network connection is provided to the router.
- Access point or router: it is a bridge between a wired network and a wireless network. It accepts a wired Ethernet connection and converts the wired connection to a wireless connection and spreads the connection as a radio wave.
- Accessing devices: It is our mobile, computer, etc from where we use the Wi-Fi and surfing internet.
All the electronics devices read data in binary form, also router or our devices, here routers provide radio waves and those waves are receive by our devices and read the waves in binary form. We all know how a wave looks like, the upper pick of the wave is known as 1 and the lower pick of the wave is known as 0 in binary. Like below:
Some more terminologies
- SSID (Service Set Identifier): It is a 32 character name that identifies the Wi-Fi network and differentiates one Wi-Fi from another Wi-Fi. All the devices are attempting to connect a particular SSID. Simply, SSID is the name of the wireless network.
- WPA-PSK (Wi-Fi Protected Access- Pre-Shared Key): It is a program developed by the Wi-Fi Alliance Authority to secure wireless networks with the use of Pre-Shared Key(PSK) authentication. WPA has 3 types, such as WPA. WPA2, WPA3. It is a way of encrypting the Wi-Fi signal to protect from unwanted users.
- Wi-Fi uses Ad-Hoc networks to transmit. It is a point-to-point network without any interface.
How signals are reached to our devices?
Advantages of Wi-Fi
- It is a flexible network connection, no wiring complexities. Can be accessed from anywhere in the Wi-Fi range.
- It does not require regulatory approval for individual users.
- It is salable, can be expanded by using Wi-Fi Extenders.
- It can be set up in an easy and fast way. Just need to configure the SSID and Password.
- Security in a high in Wi-Fi network, its uses WPA encryption to encrypt radio signals.
- It is also lower in cost.
- It also can provide Hotspots.
- it supports roaming also.
Disadvantages of Wi-Fi
- Power consumption is high while using Wi-Fi in any device which has a battery, such as mobile, laptops, etc.
- Many times there may be some security problems happening even it has encryption. Such as many times has known devices become unknown to the router, Wi-Fi can be hacked also.
- Speed is slower than a direct cable connection.
- It has lower radiation like cell phones, so it can harm humans.
- Wi-Fi signals may be affected by climatic conditions like thunderstorms.
- Unauthorized access to Wi-Fi can happen because it does not have a firewall.
- To use Wi-Fi we need a router, which needs a power source, so at the time of power cut, we cannot access the internet.
Wi-Fi
Wi-Fi is a wireless networking technology that allows computers and other devices to communicate over a wireless signal. It describes network components that are based on one of the 802.11 standards developed by the IEEE and adopted by the Wi-Fi Alliance. Examples of Wi-Fi standards, in chronological order, include:
Wi-Fi is the standard way computers connect to wireless networks. Nearly all modern computers have built-in Wi-Fi chips that allows users to find and connect to wireless routers. Most mobile devices, video game systems, and other standalone devices also support Wi-Fi, enabling them to connect to wireless networks as well. When a device establishes a Wi-Fi connection with a router, it can communicate with the router and other devices on the network. However, the router must be connected to the Internet (via a DSL or cable modem) in order to provide Internet access to connected devices. Therefore, it is possible to have a Wi-Fi connection, but no Internet access.
Since Wi-Fi is a wireless networking standard, any device with a «Wi-Fi Certified» wireless card should be recognized by any «Wi-Fi Certified» access point, and vice-versa. However, wireless routers can be configured to only work with a specific 802.11 standard, which may prevent older equipment from communicating with the router. For example, an 802.11n router can be configured to only work with 802.11n devices. If this option is chosen, devices with 802.11g Wi-Fi chips will not be able to connect to the router, even though they are Wi-Fi certified.
NOTE: The name «Wi-Fi» is similar to «Hi-Fi,» which is short for «High Fidelity.» However, «Wi-Fi» is not short for «Wireless Fidelity,» but is simply a name chosen by the Wi-Fi Alliance.