Xerox phaser 3260 настройка wifi

How To Set Up Xerox Phaser 3260 and Connect It To Wi-Fi?

One of the widely used monochrome laser printers, Xerox Phaser 3260, is designed to support both a single user and a small work team. Featuring fast and automatic both-sided printing, the Phaser 3260 is known for its rich look and innovative design. Once you complete the Xerox Phaser 3260 WiFi setup, you can connect multiple wireless-enabled devices to it and start printing wirelessly. You can connect Xerox Phaser 3260 to WiFi by following some simple steps. Read on to explore them and get some more insights into the Xerox Phaser 3260.

Xerox Phaser 3260 Manual

Before we start discussing how to conduct Xerox Phaser 3260 wireless setup, it is important to have a brief overview about the printer. Your newly purchased Xerox Phaser 3260 comes with a user manual that includes detailed information on the printer specification, installation procedure, setup guidelines, information about the Xerox Phaser 3260 driver, Xerox Phaser 3260 WiFi setup, and much more. It is recommended that you walk through the Xerox Phaser 3260 manual before starting with the setup. This will help you better understand the features of the device and will consume minimal time during the process.

How to Perform Xerox Phaser 3260 WiFi Setup?

The Xerox Phaser 3260 WiFi setup includes some simple steps. To start with, ensure that you have the Xerox Phaser 3260 driver installed on your computer. In case you didn’t receive the Xerox Phaser 3260 driver CD along with the printer package, you can visit Xerox’s official site and download the driver. Here’s the step-by-step process involved in the Xerox Phaser 3260 WiFi setup:

  1. Plug the printer’s power adapter into an electrical socket and switch it on.
  2. Visit the official site of Xerox and navigate to the drivers and downloads section.
  3. Type the printer’s model number into the search bar and click on the download link to download the Xerox Phaser 3260 driver.
  4. Once the printer driver is downloaded double-click on it and follow the on-screen instructions to install it on your computer.
  5. Now, press and hold the printer’s WPS button and ensure that the green bar under the “!” icon blinks.
  6. While the “!” icon is blinking, press the WPS button on your router to turn on WPS-PCB mode.
  7. Once the WPS establishes a connection, the light under the “!” icon will change to stable blue.
  8. Locate the wireless network name in the printer’s control panel and tap on it to connect to the WiFi. Enter the wireless network passphrase when prompted to connect to the wireless network and print wirelessly.
Читайте также:  Настройка wifi ethernet моста

Tips To Connect Xerox Phaser 3260 to WiFi

If you have wireless-enabled devices such as a laptop, WIFi-enabled desktop computer, iPhone, Android phone, or tab, you can Xerox Phaser 3260 connect to WiFi. However, before doing that, ensure that you have properly set up the printer and have the printer driver installed. To start connecting your Xerox Phaser 3260 to WiFi using a laptop, first, enable the wireless feature of the printer. Once the printer’s control panel displays the list of available wireless networks, you need to select the relevant network and tap on it. Lastly, enter your WiFi password in the requested field and tap on connect to start printing wirelessly. In case, you encounter Xerox Printer out of paper error after the WiFi connection, check if the printer tray is loaded with sufficient papers. You can also perform a quick restart of the printer and check if the issues has been resolved.

Xerox Phaser 3260 Wireless Setup

When we talk about Xerox Phaser 3260 wireless setup, it means that we are preparing the printer for wireless printing and not via any other mode. If you are not aware of how to configure Xerox Phaser 3260 through wireless setup, follow the series of instructions mentioned below:

  1. On your computer go to Start > Xerox Printers > Xerox Easy Wireless Setup.
  2. Connect one end of the USB cable to the computer and another to your computer. Although it’s a wireless setup, you need to connect the computer and the printer initially with the USB cable.
  3. Select Next. Once the connection is established using the USB cable, the program will search for WLAN data.
  4. From the list of available wireless networks, select your wireless network and then Next.
  5. Now, enter your WiFi password and select Next.
  6. On the “Wi-Fi Direct Settings” screen, uncheck the box next to “Yes, I want to turn on Wi-Fi Direct on my printer”.
  7. Select Next and then Finish when you see the “Wireless Network Setup Complete” screen.

How to Factory Reset Xerox Phaser 3260?

Factory reset of your Xerox Phaser 3260 Printer gives you an excellent opportunity to start over and begin everything new with the device. When you reset the printer to its factory default settings, the machine goes back to the factory defaults which makes the printer like it was initially when you brought it. On resetting the printer to factory default settings, all your data is removed from it. Doing this usually resolves every minute problem of the printer that occurs due to prolonged usage of the machine. Here’s the series of steps involved in resetting the Xerox Phaser 3260 Printer:

  1. Log into your computer as an administrator and open the Control Panel.
  2. Press the Home button on the printer and then navigate to Device > resets.
  3. Tap on “Reset to Factory Defaults” to reset the Xerox Phaser 3260 Printer.
  4. Tap on Reset at the confirmation dialog box to complete the process.
Читайте также:  Ростелеком тв каналы подключение через вай фай

Tips To Resolve Xerox Phaser 3260 Red Light Issues

Xerox Phaser 3260 red light is among the common error occurrences that usually gets triggered due to low ink levels on Xerox Phaser 3260 toner. In such cases, you need to get the existing ink cartridge replaced with a new one. If you notice that the red light on the printer is constant red, the printer can no longer print until you replace the ink cartridge. To replace the ink cartridge on your printer, first, remove the printer’s cover to access the toner cartridge. Next, remove the existing toner by pulling it out from its slot and then replace it with a new one.

Another reason which leads to the occurrence of red light issues on Xerox Phaser 3260 Printer is outdated printer drivers. Always ensure that the printer driver you have installed on your computer is an updated one.

Источник

настройка wi-fi в принтерах xerox phaser 3020, 3052, 3260

Всем пострадавшим от оригинальной инструкции Херох по настройке вайфай посвящается. Метод подключения без использования диска и драйверов от херох.
Проверено под вин10, но должно работать под вин7 и вин8.

1 — после установки картриджа подключите принтер к компьютеру по usb, компьютер должен выбрать драйвер сам.

2 — сделайте пробную печать, выбрав соответствующий принтер. Если принтер выполнил ваше задание по печати, приступайте к следующему пункту.

3 — удерживая свыше 4х секунд кнопку «отмена печати» получите распечатку параметров принтера. //это единственное полезное что написано в родной инструкции

4 — в списке доступных вашему компьютеру вайфай сетей найдите что-то похожее на DIRECT-ERPhaser 3052 и подключитесь к ней, используя в качестве пароля набор цифр во второй строке снизу второго листа, полученного в результате выполнения пункта 3 — это wps-ключ сети раздаваемой принтером.

5 — на второй странице, которую выдаст вам принтер после выполнения пункта 4 в пятой строке снизу будет айпи адрес начинающийся с 192 — это адрес который вам надо ввести в браузере, чтобы попасть в сетевые настройки принтера

6 — вы попадете в почти-админку встроенного в принтер роутера, про которую вы уже многое читали в «родной инструкции»(тм)

7 — в админке надо нажать кнопку «свойства» и ввести логин/пароль admin/1111 для реального входа в админку (эти логин и пароль тоже указаны в родной инструкции)

8 — слева в нижней части меню админки вы увидите надпись wi-fi, и там еще один wi-fi. Войдите в этот раздел меню.

9 — нажмите кнопку «мастер» в разделе «параметры вафай» справа.

10 — вы увидите список вайфай сетей, которые «видит» принтер. Сразу предупрежу сети 5 ггц он не видит.

11 — выберите сеть и ДВАЖДЫ введите ее пароль.

13 — в панели управления windows в разделе «устройства и принтеры» вашего компьютера может появиться, а может и не появиться 2 сетевых принтера, это в дополнение к тому принтеру который появился когда вы первый раз подключили принтер по усб

Читайте также:  Get all wifi passwords

14 — если 2 сетевых принтера не появились, то нажмите кнопку «добавить принтер» и из списка последовательно добавьте тот у которого название содержит название вашего принтера и второй с названием похожим на XRX9C934E3B1626. добавить надо ОБЯЗАТЕЛЬНО ОБА!

15 — сделайте пробную печать отправив задание на устройство с названием похожим на XRX9C934E3B1626

16 — если все ок — радуйтесь жизни. Если что-то пошло не так — ничем не могу вам больше помочь :). Найдите специалиста.

После этих процедур ваш принтер должен быть всегда доступен для печати.

Пункты 13-15 надо выполнить на каждом компьютере сети, с которого вы собираетесь выполнять печать на принтере. Возможно также придется выполнять и пункты 1-2 на каждом компьютере сети, «но это не точно» :).

Источник

How To Configure Wireless Connectivity Using CentreWare Internet Services (Phaser 3052NI, 3260DI, and 3260DNI)

Note: The machine will not connect to the wireless network while the network cable is attached.

  1. At your workstation, open a browser window, enter the IP Address of the machine in the Address Bar, and then press Enter.
  2. Select Properties.
  3. If prompted, enter the admin for the ID and 1111 for the Password, and select Login.
  4. Select Properties.
  5. In the NetworkSettings link, select the Wi-Fi link, and then select the Wi-Fi link below that. The Connection Status shows the Link Status of the wireless connection. The Wireless Settings area provides options to configure wireless connectivity. The options are Easy Wireless Settings and Advanced Settings, and are explained below.

Use the Easy Wireless Settings Wizard

  1. Select the Easy Wi-Fi Settings Wizard button to have the machine find the WPS Settings automatically. The SSID screen appears with a list of available wireless networks.
  2. Select the required Network Name SSID and click Next.
  3. If encryption is required:
    1. Enter the WPA Shared Key.
    2. Enter the Confirm Network Key and click Next.

    Configure Advanced Wireless Settings

    1. Select the Advanced SettingsCustom button. The Advanced Wireless Setup screen appears.
    2. To enable Wireless Radio, select On from the Wireless Radio menu.
    3. Select the required option for SSID:
      • Select Search List and select the required network from the drop-down menu. Click the Refresh button to update the list of networks available.
      • Select Insert New SSID to enter a new wireless network name.
    4. In the Security Setup area:
      1. Select the required method of Authentication.
      2. Select the required method of Encryption.
      1. Select the required option for Using Key.
      2. The Hexadecimal option may be enabled. Click the Hexadecimal check box to deselect if required.
      3. Enter the required Network Key and Confirm Network Key.

      Did this help?

      • COVID-19 Resources
      • Innovation
      • Environment, Health and Safety
      • Corporate Social Responsibility
      • Our Policy Positions
      • Security Solutions
      • Newsroom
      • Events
      • Xerox Ventures
      • CareAR
      • Fittle

      Источник

Оцените статью
Adblock
detector