Zabbix мониторинг роутера zyxel keenetic

ZYXEL MES3500-24S by SNMP

Zabbix should be configured according to instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Triggers will be created only for interfaces whose description contains the value of this macro

The time interval for SNMP agent availability trigger expression.

Filter by discoverable interface names.

Filter to exclude discovered interfaces by name.

Filter of discoverable link types.

Filter to exclude discovered by link types.

Filter of discoverable status.

Filter to exclude discovered by status.

Filter by discoverable SFP modules name.

Filter to exclude discovered SFP modules by name.

Receiving data from the SFP module is slow, we do not recommend setting the interval less than 10 minutes.

Items

Name Description Type Key and additional info
ZYXEL MES3500-24S: SNMP agent availability Zabbix internal zabbix[host,snmp,available]

Preprocessing

A textual description of the entity. This value

should include the full name and version

identification of the system’s hardware type,

software operating-system, and networking

software. It is mandatory that this only contain

printable ASCII characters.

SNMP agent zyxel.3500_24s.model

Preprocessing

The textual identification of the contact person

for this managed node, together with information

on how to contact this person.

SNMP agent zyxel.3500_24s.contact

Preprocessing

An administratively-assigned name for this

managed node. By convention, this is the node’s

fully-qualified domain name.

SNMP agent zyxel.3500_24s.name

Preprocessing

The physical location of this node (e.g.,

    Discard unchanged with heartbeat: 6h`

The interface’s address at the protocol layer

    Discard unchanged with heartbeat: 6h`

The time (in hundredths of a second) since the

network management portion of the system was last

SNMP agent zyxel.3500_24s.net.uptime

Preprocessing

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

SNMP agent zyxel.3500_24s.hw.uptime

Preprocessing

SNMP agent zyxel.3500_24s.fwversion

Preprocessing

SNMP agent zyxel.3500_24s.serialnumber

Preprocessing

Show device CPU load in %, it’s the snapshot of CPU load when

Show device memory usage in %.

Triggers

SNMP is not available for polling. Please check device connectivity and SNMP settings.

This template is for Zyxel MES3500-24S series, but connected to

Uptime is less than 10 minutes.

Firmware version has changed. Acknowledge to close the problem manually.

Device serial number has changed. Acknowledge to close the problem manually.

The CPU utilization is too high. The system might be slow to respond.

The system is running out of free memory.

LLD rule Fan discovery

Item prototypes for Fan discovery

Current speed in Revolutions Per Minute (RPM) on the fan.

SNMP agent zyxel.3500_24s.fan[]

Preprocessing

Trigger prototypes for Fan discovery

Please check the fan unit

LLD rule Temperature discovery

Item prototypes for Temperature discovery

The current temperature measured at this sensor

SNMP agent zyxel.3500_24s.temp[]

Preprocessing

Trigger prototypes for Temperature discovery

Please check the temperature

LLD rule Voltage discovery

SNMP agent zyxel.3500_24s.volt.discovery

Preprocessing

Item prototypes for Voltage discovery

The current voltage reading.

SNMP agent zyxel.3500_24s.volt[]

Preprocessing

Trigger prototypes for Voltage discovery

Please check the power supply

LLD rule Interface discovery

Name Description Type Key and additional info
Interface discovery SNMP agent zyxel.3500_24s.net.if.discovery

Item prototypes for Interface discovery

Select The speed and the duplex mode of the Ethernet connection on this port. Selecting Auto

(auto-negotiation) allows one port to negotiate with a peer port automatically to obtain the

connection speed and duplex mode that both ends support. When auto-negotiation is turned on,

a port on the Switch negotiates with the peer automatically to determine the connection speed

and duplex mode. If the peer port does not support auto-negotiation or turns off this feature,

the Switch determines the connection speed by detecting the signal on the cable and using half

duplex mode. Thus requiring you to make sure that the settings of the peer port are the same in

SNMP agent zyxel.3500_24s.net.if.speed_duplex[]

Preprocessing

Descriptive name that identifies this port.

SNMP agent zyxel.3500_24s.net.if.name[]

Preprocessing

The entry shows the linkUp cable type (copper, fiber, xfp or cx4) for the combo ports.

SNMP agent zyxel.3500_24s.net.if.link_type[]

Preprocessing

A textual string containing information about the interface

SNMP agent zyxel.3500_24s.net.if.descr[]

Preprocessing

The current operational state of the interface.

The testing(3) state indicates that no operational

SNMP agent zyxel.3500_24s.net.if.operstatus[]

Preprocessing

The desired state of the interface. The

testing(3) state indicates that no operational

SNMP agent zyxel.3500_24s.net.if.adminstatus[]

Preprocessing

The total number of octets received on the interface,

including framing characters.

SNMP agent zyxel.3500_24s.net.if.in.traffic[]

Preprocessing

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were not addressed to a multicast

or broadcast address at this sub-layer

SNMP agent zyxel.3500_24s.net.if.in.ucastpkts[]

Preprocessing

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses.

SNMP agent zyxel.3500_24s.net.if.in.multicastpkts[]

Preprocessing

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

SNMP agent zyxel.3500_24s.net.if.in.broadcastpkts[]

Preprocessing

The total number of octets transmitted out of the

interface, including framing characters. This object is a

64-bit version of ifOutOctets.

SNMP agent zyxel.3500_24s.net.if.out.traffic[]

Preprocessing

The total number of packets that higher-level protocols

requested be transmitted, and which were not addressed to a

multicast or broadcast address at this sub-layer, including

those that were discarded or not sent.

SNMP agent zyxel.3500_24s.net.if.out.ucastpkts[]

Preprocessing

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses.

SNMP agent zyxel.3500_24s.net.if.out.multicastpkts[]

Preprocessing

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent.

SNMP agent zyxel.3500_24s.net.if.out.broadcastpkts[]

Preprocessing

An estimate of the interface’s current bandwidth in bits per second

SNMP agent zyxel.3500_24s.net.if.highspeed[]

Preprocessing

Interface utilization percentage

Calculated zyxel.3500_24s.net.if.in.util[]

Preprocessing

  • In range: 0 -> 100 ⛔️Custom on fail: Discard value
  • JavaScript: The text is too long. Please see the template.

Interface utilization percentage

Calculated zyxel.3500_24s.net.if.out.util[]

Preprocessing

  • In range: 0 -> 100 ⛔️Custom on fail: Discard value
  • JavaScript: The text is too long. Please see the template.

Trigger prototypes for Interface discovery

This trigger expression works as follows:1. It can be triggered if the operations status is down.2. «>=1 — a user can redefine context macro to value — 0. That marks this interface as not important. No new trigger will be fired if this interface is down.3. =1 — the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the ‘eternal off’ interfaces.)WARNING: if closed manually — it will not fire again on the next poll, because of .diff.

LLD rule SFP without DDM discovery

Item prototypes for SFP without DDM discovery

SNMP agent zyxel.3500_24s.sfp.status[]

Preprocessing

Transceiver module vendor name.

SNMP agent zyxel.3500_24s.sfp.vendor[]

Preprocessing

Part number provided by transceiver module vendor.

SNMP agent zyxel.3500_24s.sfp.part[]

Preprocessing

Serial number provided by transceiver module vendor.

SNMP agent zyxel.3500_24s.sfp.serialnumber[]

Preprocessing

Revision level for part number provided by transceiver module vendor.

SNMP agent zyxel.3500_24s.sfp.revision[]

Preprocessing

Transceiver module vendor’s manufacturing date code.

SNMP agent zyxel.3500_24s.sfp.datecode[]

Preprocessing

Transceiver module type names.

SNMP agent zyxel.3500_24s.sfp.transceiver[]

Preprocessing

Trigger prototypes for SFP without DDM discovery

SFP serial number has changed. Acknowledge to close the problem manually.

LLD rule SFP with DDM discovery

SNMP agent zyxel.3500_24s.sfp.ddm.discovery

Preprocessing

Item prototypes for SFP with DDM discovery

SNMP agent zyxel.3500_24s.sfp.ddm[]

Preprocessing

Trigger prototypes for SFP with DDM discovery

The upper threshold value of the parameter is exceeded

The parameter values are less than the lower threshold

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Источник

Zabbix + Zyxel

Zyxel Communications Corp is a manufacturer of networking devices.

Available solutions

Articles and documentation

Didn’t find what you are looking for?

Request custom integration

Zabbix integration team will develop custom integration based on your requirements and Zabbix best practices.

Propose your integration

Have you already developed high quality integration and want to submit to Zabbix integration repository?

  • Features
  • What’s new in Zabbix 6.4
  • Screenshots
  • System requirements
  • Lifecycle & Release Policy
  • License
  • Documentation
  • Roadmap
  • By Topic
  • By Industry
  • For Enterprises
  • Case studies
  • Customers and Users
  • Integrations & Templates
  • Support
  • Consulting
  • Turn-Key Solution
  • Template building
  • Upgrade
  • Development
  • Remote troubleshooting
  • Integration
  • Certified User
  • Certified Specialist
  • Certified Professional
  • Certified Expert
  • Testimonials
  • Training FAQ
  • Application form
  • Webinars
  • Partner Program
  • Become a Partner
  • Strategic Partners
  • Distributors
  • Map of Partners
  • Events
  • Forum
  • Blog
  • Bugs and Feature Requests
  • Developers
  • Community templates
  • Newsletters
  • About Us
  • Career
  • Contacts
  • Press Releases
  • Trademark
Join us! We’re hiring!

© 2001-2023 by Zabbix LLC. All rights reserved.

Источник

Читайте также:  Настройка роутера keenetic air kn 1611
Оцените статью
Adblock
detector